[ perfil comerciante ]
We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Máquinas plegadoras KRAMER AMS 1000/1,5
máquinas para trabalhar metal / trabalho de chapa metálica / Máquinas plegadoras
sheet width: 1020 mmplate thickness: 1,5 mmdaylight opening: max. 85 mmweight of the machine ca.: 240 kgdimensions of the machine ca.: mSmallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness sLowering capability of the lower and bending beams 20 ...
Fabricante: KRAMER
Modelo:AMS 1000/1,5
Tipo de máquina: Máquinas plegadoras
Número do item: 167907164
Quantidade: 1
Data: 31.08.2026
Ano de fabricação: 1981
Localização: Goldenstedt
Preço:
Máquina em estoque:Sim
Seller-item-No.:2031-3961
sheet width: 1020 mm
plate thickness: 1,5 mm
daylight opening: max. 85 mm
weight of the machine ca.: 240 kg
dimensions of the machine ca.: m
Smallest bending width factor 10 x sheet thickness s
Smallest inner radius factor 1.5-2 x sheet thickness s
Lowering capability of the lower and bending beams 20 mm
On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring.
The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned.
The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 1,5 mm
daylight opening: max. 85 mm
weight of the machine ca.: 240 kg
dimensions of the machine ca.: m
Smallest bending width factor 10 x sheet thickness s
Smallest inner radius factor 1.5-2 x sheet thickness s
Lowering capability of the lower and bending beams 20 mm
On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring.
The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned.
The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compartilhe esta máquina em Facebook: