Utilizou a Linha Completa de Engarrafamento para PET e Vidro em 2007 ALCOA

Used Complete Bottling Line for PET and Glass 2007 Year: 2007 | Speed: 14,000 bph | Containers: PET and glass | Formats: 250 ml, 600 ml, 1 L | Products: Juice, still water. This PET bottling machinery is configured as a full factory line with depalletizing, blow molding, rinsing, filling/capping, inspection, pasteurization, packing, and palletizing. Ready for operation. This listing is used equipment for PET bottles and glass bottles in the stated formats. Depalletizer: Icon (2007) Blow Molding Machine: Sidel SBO 10/14 Four (1994) Rinsing Machine: Gem (2007) Filling Monoblock: Icon 5000 30/10 (2007) Labeling Machine: Kosme Merkur 16 T S1 S2 ADV (1995) Capping Machines: Arol EURO/PK (2007); Alcoa VK-138 Headset 55950 (2007) Inspector / Induction Sealer: Enercon (2007) Pasteurizer: Tetra Pak® (2007) Wrap Around Packer: Dimac Star Wrap 25 (2007) Lane Divider: SMI DIVIPACK 200 (2002) Palletizer: Fibreking (2007) Depalletizer Removes bulk bottles stacked on pallets and places them onto an accumulation area ahead of the Lowerator. Operation is manual. Forklift interfaces include loading full pallets to the infeed conveyor, removing empty pallets from the discharge conveyor, and positioning empty pallets at operator level for layer dividers. Cleaning is performed with the machine switched off and the hoist lowered. Bottle Lowerator Transfers bottles from the depalletizer operator level to the lower-level rinser infeed before the filler. This unit is for glass bottles and can be mechanically adjusted to accommodate different bottle dimensions. Gripper Rinser Mechanical gripper rinser for full internal cleaning. Suitable for both PET and glass bottles. Mechanical adjustments allow fast changeover between bottle types and sizes. Filling Monoblock Icon ICON 5000 30/10 Filling and Pick-and-Place Capping Machine. Purchased in 2007, with 30 filling heads and 10 capping heads. Within the PET bottling machinery train, this monoblock provides the following capabilities: 10,000 bph for 1,250 ml and 1L juice (SBO10) maximum production rate 14,000 bph for 600 ml PET (SBO10 + SBO4) Also suitable for glass bottles Year of Manufacture: 2007 | Manufacturer: Icon Arol Capper (Plastic Bottles) Pick-and-place Arol capper turret installed inside the Icon filler for plastic screw closures. Capabilities: 28 mm flat caps 28 mm sports caps 38 mm flat caps Not suitable for ROPP aluminum caps (use the Alcoa capper for ROPP) Model: EURO/PK FLAT AND SPORT TURRET 10 HEADS Manufacturing Year: 2007 Speed: 24,000 BPH (max mechanical) Packaging: round PET bottles (max diameter 110 mm) Closure: plastic screw FLAT and SPORT caps 28 mm; plastic screw FLAT caps 38 mm Voltage: 415V / 50Hz / 24V Pitch: 157 mm | Pitch diameter: 500 mm | Working direction: Clockwise Cap Chute / Hopper – Used Complete Bottling Line for PET and Glass Stainless-steel cap chute transfers plastic and aluminum caps to the cap sorter of both the Arol capper (plastic) and the Alcoa capper (ROPP). Shared distribution between the two capping systems. Bottle Inspection/ Rejector & Induction Sealer Cap-foil presence detection with early reject to a dedicated side conveyor for reprocessing. The system integrates an Enercon induction sealing inspection and reject device to verify the presence of the foil seal beneath the cap and remove noncompliant bottles before downstream operations. Alcoa Capper (Glass Bottles) ROPP capper for glass bottles. The Alcoa unit includes a cap sorter and shares the cap chute with the Arol capper for plastic bottles. It is used for beverage alcohol in glass bottles. Operation can be configured with 4 heads or 8 heads depending on product requirements. Maximum production rate: 80 bottles per minute. The turret includes 2 tuckers and 2 threaders located opposite each other; mechanical adjustments allow setup for different bottle-neck diameters. Model: Alcoa Capper VK-138 Headset 55950 Plastic Bottle Inverter / Steriliser In-line inverter/sterilizer primarily for PET, using hot product temperature to treat the bottle mouth and cap exterior. Speed is synchronized to match the overall line rate. Cooling / Warming Tunnel Dual-function tunnel system for temperature conditioning: Cooling tunnel: For pasteurized and hot-filled products (juices). Stainless-steel construction with a series of spray nozzles applying cool water to rapidly bring bottles to target temperature, preserving product quality. Warming tunnel: For alcohol products filled cold. Raises bottle temperature to prevent surface condensation, improving label adhesion and downstream handling. Pasteuriser – Used Complete Bottling Line for PET and Glass Tetra Pak® pasteurizer for juice sterilization; suitable for milk products as well. Capacity: up to 10,000 L/hour. Maximum temperature: 100℃. 1995 Kosme Rotary Labeller Kosme rotary labeling machine for self-adhesive paper or plastic labels. Bottles are rotated to the optimal application position; labels are applied and smoothed by roll-on plates. Configur
seller offer No. resale LC383