
2006 – Stromab – CT800 – Beam Cutting Center
LeilãoVendedor verificado
Licitação¹ sem IVA
Diretamente ao vendedor
12.000 €
1 / 1
Dados técnicos
· ID 170459521Máquinas
- Licitação¹ sem IVA
- 12.000 € (netto)
- Preço base
- 12.000 € (sem IVA)
- Fim do leilão
- O leilão termina em 03.12.2026 – 15:11 CET.
- Localização
- 74000 Auvergne-Rhône-Alpes
¹ Último estado comunicado; prevalecem as informações da leiloeira.
Identifikation
Número do artigo711d2c46-f1a6-4d24-959c-74ca66fe3518
Technik
Quantidade1
Descrição
CUTTING CENTER FOR STRUCTURAL BEAMS \"CT800\"
CV 20, blade diameter 800 mm.
Total weight without tables (kg) : 2900
Complete with: Carbide blade diameter 800 mm., F40, Z=48, S=7
N°5 axes controlled by the controller:
• Worktable rotation (0°-340°) (Worktable rotation speed 9 sec. every 180°)
• Blade tilt from 90° to 45° (Blade tilt speed 20 sec. from 90° to 45°)
• Blade Rise (speed 15 sec. every 10 cm.)
• Beam drive and measurement (speed at 17 mt/min)
• Motorized movement of the table in relation to the rear guide (total movement of the table 600 mm.)
• Sensor for reading the beginning of the beam
• Pair of vertical cylinders for cutting optimization management
Cutting Accuracy:
• +/- 2 mm. on a beam of mt.10 (straight beam)
• +/- 0.2° on the rotation angle of the table in work
• +/- 0.2° on the angle of inclination of the blade
Management and Control System:
• Industrial Touch-Screen PC
• Working system
• Windows
• USB-Ethernet port
Cutting Capacity:
• Minimum cutting cross-section: mm. 120 x 45
• At 90° with a single cut: mm.280x290 / 250x390 / 200x450
• At 90° with cuts in sequence mm.280x770 / 250x840
• At 45° with a single cut: mm.200x210
• 45° with sequence cuts: mm.200x760
Auction-ID: A1-52403-6
CV 20, blade diameter 800 mm.
Total weight without tables (kg) : 2900
Complete with: Carbide blade diameter 800 mm., F40, Z=48, S=7
N°5 axes controlled by the controller:
• Worktable rotation (0°-340°) (Worktable rotation speed 9 sec. every 180°)
• Blade tilt from 90° to 45° (Blade tilt speed 20 sec. from 90° to 45°)
• Blade Rise (speed 15 sec. every 10 cm.)
• Beam drive and measurement (speed at 17 mt/min)
• Motorized movement of the table in relation to the rear guide (total movement of the table 600 mm.)
• Sensor for reading the beginning of the beam
• Pair of vertical cylinders for cutting optimization management
Cutting Accuracy:
• +/- 2 mm. on a beam of mt.10 (straight beam)
• +/- 0.2° on the rotation angle of the table in work
• +/- 0.2° on the angle of inclination of the blade
Management and Control System:
• Industrial Touch-Screen PC
• Working system
• Windows
• USB-Ethernet port
Cutting Capacity:
• Minimum cutting cross-section: mm. 120 x 45
• At 90° with a single cut: mm.280x290 / 250x390 / 200x450
• At 90° with cuts in sequence mm.280x770 / 250x840
• At 45° with a single cut: mm.200x210
• 45° with sequence cuts: mm.200x760
Auction-ID: A1-52403-6



