Mechatronika (OEM Paggen) MX70 Montadores para placas de circuito impresso (PCB) Paggen

We sell our pick-and-place machine PAGGEN MX70. It was manufactured by Mechatronika in Poland, PAGGEN sold it under its own name. We used it for prototypes and small series.

Technical data according to the manufacturer:

Pick-and-place capacity: 2,000 to 2,400 components per hour
Accuracy: better than 0.08mm
Component sizes: 0201 to 40 x 40 mm, pitch from 0.4 mm
Loading area: 330 x 500 mm
Feeder: Spaces for 64 belts of 8 mm each and 30 SO8 rods, belt widths from 8 to 44 mm, plus trays and bulk material
Pipette changer: automatic, 8 pipettes
Vision: Correction via registration marks, bad mark recognition, contactless centering of the components
Axes: linear encoders, XY resolution 5 μm, rotation angle 0.05°
Control: PC with 17 inch monitor
Connections: 230 V, 50 Hz, 400 W; Compressed air with 0.6 MPa and 20 l/min
Dimensions and weight: 750 x 1100 x 1350 mm, approx. 150 kg

A viewing with a test run is possible by arrangement. The buyer picks up the machine. For 150 kg, a pallet truck and two people are required.