Plainas mecânicas de quatro lados WEINIG Variomat_Multifunktionstisch

Number of spindles: 5 St.
Working width: 20 - 230 mm
Working height: 8 - 120 mm
Length of the planing table: 2000 mm
Feed motor: 1,1 kW
Feed speed: stufenlos regelbar 2 - 12 m/min.
Control: Memory Funktion
1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table
------------------------------------------------------------ ------------------
Machine will be cleaned and functionally tested before delivery !

Technical manufacturers description:
--------------------------------------
Working width: 20 - 230 mm
Working height: 8 - 120 mm

1st spindle horizontal, bottom
---------------------------------------
Motor with brake: 5.5 kW
Diameter 40 mm
Speed 6000 rpm
Tool radius 125 - 145 mm
Axis adjustment range 5 mm
Folding device including rebate cutter
MarathonCoating for table insert before and after the 1st lower spindle

2nd spindle vertical, right
---------------------------------------
Motor with brake: 11 kW
Common motor with left vertical spindle
Diameter 40 mm mm
Speed electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP)
Tool cutting radius for longitudinal machining 93-232 mm
Minimum tool diameter at stop plane: 93 mm
Maximum tool diameter behind stop plane: 180 mm
Maximum throat depth 45 mm
Axially adjustable travel 30 mm
Insertion segment, including additional stop lip 125 mm
Insertion segment, including additional stop lip 150 mm

3rd vertical spindle, left POWERLOCK/HSK
---------------------------------------
Shared motor with 1st right spindle
PowerLock tool holder
Shared speed with right vertical spindle
Tool cutting radius for longitudinal machining 93-232 mm
Maximum throat depth 45 mm
Minimum throat depth with tool cutting radius 200 mm: 20 mm
Axially adjustable travel under table 30 mm
Insertion segment 125 mm
Insertion segment 150 mm

4th spindle, horizontal, top
---------------------------------------
Motor with brake: 5.5 kW
Diameter 40 mm
Speed 6000 rpm
Tool cutting radius 125-200 mm
Maximum chamfering depth 30 mm
Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm
Axially adjustable range 30 mm
Glazing bead removal after the upper spindle

5th spindle, second, horizontal, bottom
---------------------------------------
Motor with brake: 4 kW
Diameter 40 mm
Speed 6000 rpm
Tool cutting radius 125-200 mm
Maximum chamfering depth 15 mm
Axially adjustable range 10 mm

Machine operation
---------------------------------------
Both axes of all spindles - with the exception of the first lower spindle - are
equipped with
mechanical digital displays.

Central radial adjustment with mechanical digital display of the feed rate
along with the pressure in front of the upper spindle.
The pressure after the upper spindle can be adjusted separately.

Memory function
---------------------------------------
For saving the setting values of profiles
Tool holder axes and pressure elements before and after the upper
tool holder with electronic dual displays:
Function:
-Saving the setting values of the finished profile at the touch of a button
under a
profile number
- When the profile number is selected again, the electronic dual displays
show the setting values
- By manually adjusting the tool holders and pressure elements,
the displays are aligned
- 99 memory locations

3 axial CNC-controlled adjustment and positioning of the spindles
in conjunction with the memory function. For spindles 2, 3, and 4

3 radial CNC-controlled adjustment and positioning of the spindles
in conjunction with the memory function. For spindles 2, 3, and 4

Multifunctional Table
---------------------------------------
Package for multifunctional table with pivoting length stop

Cross-profiling of mortise and tenon joints and counter profiles on the left
spindle with sliding table.

Longitudinal profiling of short parts on the left spindle with sliding table.

Simple and quick conversion from longitudinal machining to cross-profiling.

Maximum tilt angle: +/- 45 degrees
Axially adjustable travel above the machine table: 60 mm

Tool travel circle of the left tool holder
0-90 mm below the multifunction table level: 93-232 mm
18-93 mm below the multifunction table level: 93-290 mm
0-18 mm below the multifunction table level: 93-320 mm
0-120 mm above the multifunction table level: 93-320 mm

Tool travel circle of the straight planer head behind the zero line: 190 mm
Radial adjustment range of the left tool holder: 75 mm

Axial and radial electric digital readout on the left spindle with
additional function for the multifunction table

Single and double part loading

Cross profiling on the left spindle for working height: 80 mm
Log length: 200 - 2,200 mm
Log length at tilt angle 0 degrees to +/- 45 degrees: 250 mm
Log width at 0-degree swivel angle: 20-800 mm
Log width at 0-degree swivel angle to +/- 45 degrees: 20-500 mm
Log height: 20-80 mm
Spindle clamping length: 130 mm
Automatic direction change

Cross-cutting function:
For double-piece feeding
First piece of wood resting against the stop
Min./max. log width: 55-90 mm
Second piece of wood:
Max. log width: 90 mm
Log length: 200-2,200 mm

Longitudinal processing function
For single-piece feeding
First piece of wood resting against the stop
Min./max. log height: 20-100 mm
Min./max. log width: 45-110 mm
Min./max. log length: 100-1,000 mm

Pneumatic clamping device using two Clamps
Additional clamp, pneumatically mounted on the multifunctional table,
can be individually adjusted using a grid.

Right-hand stop for cross machining
2 clamping bars for additional counter wood

General spindles
---------------------------------------
All throat spindles dynamically balanced for high concentricity

PowerLock adapter
for conventional tools up to a maximum speed of 6000 rpm.
The tool must rest against the adapters contact collar and must not exceed the
following limits in weight
and dimensions.

When using a speed of 6000 rpm, the following requirements must be observed.

The tool must be approved for a minimum speed of 6000 rpm.
Maximum weight: 20 kg
Diameter x length:
122 x 240 mm / 137 x 200 mm
160 x 140 mm / 200 x 90 mm

Feed system
---------------------------------------
Frequency-contr olled feed 1.1 kW, continuously adjustable 2-12 m/min
Double pendulum opposite the left spindle
Adjustment range of the feed rollers opposite the left spindle, axial: 35 mm
Durofer pointed tooth rollers with depth gauge and self-cleaning
1 set of rubber rollers in the machine inlet
Pneumatic pressure for feed rollers, including water separator
One feed roller in front of the lower spindle, including separate pressure
control
and pneumatically controlled up-down

Machine stand, tables, stops
---------------------------------------
Surface table 2 m long (incl. Jointing guide)
One sliding roller in the outfeed table
Lubricant pump with foot pedal for resin removal

Pressure elements and guides
---------------------------------------
Lateral roller pressure in front of the left spindle, revolving and spring-
loaded
Lateral pressure roller on the infeed table, spring-loaded
Top pressure roller, spring-loaded

INCLUDES:
--------------------------------- ------
4 Leitz Heliplan planer heads
1 jointing cutter
---------------------------------------
Price of the above-mentioned machine upon request!
---------------------------------------

Images show the same model. Original images not yet available.

(Technical specifications according to the manufacturer - no guarantee!)



The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seller offer No. resale 1305-2796