Maquinaria de doblaje de tubos por mandril (13)

Tubo de fogo de trabalho Ø 6 a 42 mm - Curvatura, desbarba, pré-montagem, serra - Comprimento de extensão do tubo aproximadamente 1.500 mm - Acionamento eletro-hidráulico 1,5 kW - Peso aprox. 700 kg - Inclui ferramentas extensas - Ver fotografias

tube diameter: 6 - 28 mmwall strength: 2 mmbending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mmbending angle max.: 190 °arbor length: 3000 mmoperating pressure: 180 barhydraulic motor: 4 kWweight of the machine ca.: 900 kgdimensions of the machine ca.: 3,8 x 1,1 x 1,3 mCondition: ready for operation: Video available on our website.: Electric 400 Volt: Bending segments: 15-20-26-28 mmBending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 mDouble Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut.Mandrel lubrication, adjustable length stops.Operating modes: MANUAL and semi-automatic.Co ...

Máquina de dobra Mandrel Tansfluid DB 628 Ano construção: ano 1995 Potência de acionamento Potência de acionamento 1,5 kW Acionamento cilindro hidráulico ou corrente de rolo Tipo de curvatura da gama de tubos: 4-28 mm Ângulo de curvatura 190° (sem tubo) Raio de curvatura raio de curvatura 1,5 x D – 2,0 x D Pressão nominal 250 bar Pressão de funcionamento 3095 mm n. direita. Taxa de entrega de vazão 4,5 l/min

tube diameter: 4 - 28 mm: 3000 mmbending radius max.: 90 °connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 3,7 x 1,2 x 1,5 mElectro-hydraulic mandrel tube bending machine with- Bending mandrels for 18mm tube- Tools for: 8mm, 10mm, 12mm, and 18mm- PC interface- Laptop- DocumentationSee images for further accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabricante: Kottmann e Berger Tipo: BVA 3 Ano construção: 2001 Potência nominal: 5 kW Pressão: máx. 6 bar Diâmetro de flexão (aço): 32 mm Raio de curvatura: 1,5 x D – 2,5 x D Peso da máquina: 0,7 t

tube diameter: 28 mmwall strength: 2 mmbending radius min.: 90 °Control: 3D TubeSoft Slim total power requirement: 3,5 kWweight of the machine ca.: - kgdimensions of the machine ca.: - mmDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Faixa do tubo até: 48,3x3,25mm (E235mitRm =2xD) Raio de curvatura até: 125 mm Controle: eletrônico (+ pré-seleção conhecida do ângulo de flexão de 4 vezes) Ângulo máximo de flexão: 180 Velocidade de flexão: 20 /s Dimensões L / W / H: 2380 / 800 / 1250 mm Peso: aprox. 650 kg Electr. Potência: 2,4 kW unidade de serragem com visualização da posição da serra através de laser de linha Unidade de rebarbação, unidade de acionamento para acessórios de montagem Posicionamento do tubo - comprimento e torção Indicador de posicionamento de 2 eixos, retração prematura do mandril Automático. Lubrificação do mandril (quantidades mínimas) Interface para conexão de rede e importação de dados

Tube diameter stainless steel: bis 42 x 2,0 mmtube diameter steel: bis 42 x 3,0 mmbending angle max. +/-: 180 + 10 °section modulus: 4,1 ccmoperating pressure: 6 bartotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 6100 x 2300 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mmbending radius min.: 1,5 x D - 2,0 x D mmControl: Siemens LOGO delivery rate: 4,5 l/minbending angle max. +/-: 190 °nominal pressure: 250 baroperating pressure: 3095 bardelivery rate: 4,5 l/mintotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mmtotal power requirement: 1,5 kWweight of the machine ca.: tdimensions of the machine ca.: m- bending type: 4-28 mm- bending angle: 190° (ohne Rohr)- bending radius: 1,5 x D – 2,0 x D- nominal pressure: 250 bar- operating pressure: 3095 mm n. re.- delivery rate: 4,5 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending angle max. +/-: 180 + 10 °tube: 4100 mm- Round tube steel up to 30 x 2.2 mm ²- Round tube stainless steel up to 30 x 1.5 mm- Square tubes 20 x 2.5 mm- Bending time 90 degrees: 1.5 sec (feed)- Length feed speed: 450 mm- Radius range max 125 mm- Free-standing bending head 850 mm long- Bending axis drive electrohydraulicThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mmwall strength: 3 mmbending radius min.: 2 x Rohr-Ø ÷ R200 mmbending angle: 0 - 180 °gas tube pipelines: 2 (60.,3mm) mmspeed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kWweight of the machine ca.: 0,7 t- Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length)- Electromechanical drive of the bending axis- hydraulic clamping- mandrel feed / extract- 30 programs x 9 bending angle + correction angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mmwall strength: 6 mmbending radius min.: 180 °total power requirement: 5,5 kWweight of the machine ca.: 1300 kgdimensions of the machine ca.: 3500 x 1250 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.