espalhadores de cola usadas para venda (564)

A MÁQUINA ESTÁ EM EXCELENTE ESTADO TRABALHANDO DIARIAMENTE NA PRODUÇÃO, A MÁQUINA SERÁ SUBSTITUÍDA POR UMA NOVA MÁQUINA MAIOR A MÁQUINA ESTÁ À ESPERA IMEDIATAMENTE. DADOS TÉCNICOS ESTÃO PRESENTES NAS FOTOS NÓS ENVIAMOS MÁQUINAS EM TODO O MUNDO PARA OS CLIENTES

Estou vendendo uma máquina de banda de borda totalmente equipada BRANDT Optimat KDF 220 C, construída em 2014: Configuração: Parada de entrada ajustável manualmente Fresagem de juntas ajustável manualmente Cola EVA de banda de borda / cola PUR possível Zona de pressão do material ajustável manualmente Serras de corte transversal pneumaticamente ajustáveis Raio de fresagem na parte superior + inferior ajustável manualmente Unidade redonda de 1 motor ajustável manualmente O raspador de raio R2 pode ser ajustado pneumaticamente (conjunto R1 incluído) Painel de controlo Altura de trabalho ajustável por servomotor Altura do material 8-50mm Espessura do material da borda 0.4-3mm Velocidade de alimentação 10m/min. Comprimento incluindo placa de alimentação 4150mm Peso 1320kg Muito bom estado, totalmente funcional! Incluindo documentação completa e CE. ...

Estou vendendo uma máquina de banda de borda totalmente equipada BRANDT ProfiLine KDF 790, construída em 2006: Configuração: A parada de entrada pode ser ajustada pelo menu Fresagem de juntas ajustável manualmente Banda de borda com tanque de pré-aquecimento A zona de pressão do material pode ser ajustada pelo servo motor Serras de corte transversal ajustáveis pneumaticamente Fresagem pesada na parte superior + na parte inferior ajustável manualmente Raio de fresagem superior + inferior servo motor ajustável Unidade de serra de sulco na parte inferior Unidade redonda servo motor de 2 motores ajustável Lâmina raspadora de raio R2 pneumaticamente ajustável / segundo conjunto R1 incluído Superfície da lâmina raspadora Escovas de polimento Injeção do separador à frente Injeção limpa na parte traseira Altura de trabalho ajustável por servomotor Altur ...

Eu vendo uma máquina de banda de borda totalmente equipada SCM Olimpic S3000, construída em 2011: Configuração: Servo motor de paragem de entrada ajustável Fresadoras de juntas ajustáveis pneumaticamente Banda de borda com tanque de pré-aquecimento Zona de pressão do material servo motor ajustável Serras de corte transversal pneumaticamente ajustáveis Fresadoras fortes podem ser ajustadas manualmente Raio de fresagem pneumaticamente ajustável superior + inferior Unidade redonda de 4 motores ajustável pneumaticamente A lâmina do extrator de raio R2 pode ser desligada pneumaticamente Superfície da lâmina de desenho Escovas de polimento Ventilador de ar quente Injeção do separador dianteiro e traseiro Painel de controlo do sistema de controlo STARTOUCH Leitor de código de barras Servo motor de altura de trabalho ajustável Altura do material 6-60mm E ...

Espessura da aresta: 0,4 - 3 mm Espessura da peça: máximo 50 mm Comprimento mínimo da peça de trabalho 150 mm Velocidade de alimentação 22 m/min

: 0,4 - 8 mmWorkingpiece thickness from to: 8 - 60 mmTotal length: ca. 4.930 mmFeed speed: 10 m/min.total power requirement: max. 6,1 kW kwWeight: 1.400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine must be dismantled and loaded by the buyer himself. The transport and loading equipment that may be required for this purpose must be organized and provided by the buyer himself. The collection must take place by 11.12.2026 at the latest. If the machine has not been picked up by this date, it will be relocated or, if necessary, disposed of at the buyer's expense. Auction-ID: A7-51502-154

Type: wood gluing machine Year: bought second-hand in 2001 Visible model: OM 313 Use: regular application of glue to wooden parts/profiles before assembly or veneer Drive: motorized Feed: adjustable Work Table: Metal Controls: Front control panel Power supply: electric, probably three-phase Equipment: foot switch Condition: pre-owned, visible traces of use Auction-ID: A3-46110-35137

Brand: OTT Model: Pacific Plus Type: edge banding machine Connection: 380 V / 50 Hz Edge thickness: 0.3 – 15 mm Workpiece height: 8 – 60 mm Throughput speed: 12 – 18 m/min Machine length: 5,600 mm Execution and options: Professional Package Pacific Plus 18.5-inch touchscreen instead of 15-inch 2 additional swing-away support roller conveyors Automatic supply magazine for strips or solid slats PUR cleaning set with 4 nozzles and brushes Pre-equipment on ACF rounding unit for quick-change motors or automatic 3-position AKF milling Automatic 2-position scraper unit with foil compensation Equipped with R1 and R2 tools Automatic 3-position AKF milling: R1 / R2 / angled 45° Control via control panel, barcode or QR code Anti-static spray device 2 nozzles: 1 top / 1 bottom Spray device for PVC and plastic edging material Diamond roughing tool Ø85 x 62 mm Input trolley for narrow panel ...

Power: N/C (electro-pneumatic system) Operating parameters: Workpiece length 250–2,500 mm; max. width 1,200 mm; automatic longitudinal + transverse feeding; electropneumatically controlled cross scale Workpiece capacity: Panels/components of varying dimensions; suitable for furniture & wood processing lines Supported edges: Wood-based panels, MDF, chipboard, plywood (typ.) Edge types: Feeding, positioning, transfer Included equipment: Fully automatic WZ10 pulling system; air cushion table; cross alignment scale; integrated control system Compliance: Industrial woodworking equipment; CE N/C Power supply: Electric + compressed air (electro-pneumatic) Year/Manufacturer: HOMAG – PROFI TBL 100/35/12 Remarks: Designed for automatic handling and precise positioning of workpieces in longitudinal and transverse direction Automatic feeding table with WZ10 system for efficient panel transpo ...

Polishing unit without spraying at the outlet and after forming of the edges. HOLZ-HER Primus 1436 SE PVC edge banding machine Range: Primus Model: 1436 SE PVC Type: automatic edge banding / banding machine Use: application and finishing of edges on wood panels Power supply: three-phase 400 V on European configurations listed Feed speed: approx. 11 m/min Maximum panel thickness: approx. 50 mm Minimum workpiece width: approx. 60 mm Edge thickness: depending on configuration, up to approx. 8–13 mm in strips and 2–3 mm in rolls Pneumatic pressure: approx. 6 bar Indicative dimensions: L 4.5–4.7 × W 1.02–1.40 × H 1.63–1.65 m Indicative weight: approx. 1,230–1,300 kg Auction-ID: A3-46142-35224

Type: edge banding machine / edge banding machine Year of Manufacture: 2005 Serial number: 05.253.242 Power supply: 400 V – three-phase – 50 Hz Power: 2.5 kW Plate Indicated Speed: 2,450 RPM Manufacturer's plate weight: 250 kg (so I would put 250 kg rather than ±200 kg) Dimensions: approx. 180 × 65 × 110 cm CE marking Manufactured: Italy Professional machine for the laying/gluing of edges on panels, especially for carpentry and cabinetmaking. Loading possible by the seller on a trailer. The seller has the necessary equipment to load the machine onto a trailer during pick-up. Auction-ID: A3-46142-35301

: 0,4-6 mmWorkingpiece thickness from to: 6-60 mmTotal length: 3516 mmFeed speed: 10 m/min.total power requirement: kwWeight: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 0,4 - 3 mmWorkingpiece thickness from to: 9 - 60 mmTotal length: - mmFeed speed: stufenlos 8 - 12 m/min.total power requirement: 15 kwDimensions (L/W/H): 4.290 x 840 x 1.690 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used hot-melt edge banding machine (edge bander), marked \"ΠΑΝΞΥΛ\" (Panxyl) in the seller's listing. Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-156

Used automatic edge banding machine FRAVOL, Italian made, model R9 of the RAPID series. It applies PVC, ABS, melamine, veneer and solid wood edging, in strips or from the roll. A compact and sturdy machine, suitable for both industry and small workshops. The machine heats up quickly and is ready for work in 8 - 10 minutes. The pressure units are adjusted automatically, with a pressure bar with a double row of wheels. The two motors of the end trimming unit are adjustable from 0 to 15 degrees and are powered by a 200 Hz frequency converter (inverter). Technical data: Panel thickness: 10 - 60 mm Minimum panel width: 60 mm Minimum panel length: 140 mm (PVC) Edge band width: 15 - 65 mm Edge band thickness: 0.4 - 15 mm Feed rate, adjustable: 6 - 16 m/min Glue pot capacity: 3 kg Voltage: 220/380 V, 50/60 Hz, three-phase Installed power: 7.5 kW Pneumatic pressure: 6 bar Weight: 1900 kg For t ...

Used economical edge banding machine (edge bander) by Kleidara with multiple processing heads. Used for applying edge banding (melamine, PVC or wood) to panels, with gluing, cutting and trimming of the band at the panel edges. An economical option for furniture manufacturers and joinery workshops covering basic edge banding needs. Currently unchecked. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-80

Used glue spreader with rollers, for uniform glue application on wood surfaces, veneers or edges before pressing or lamination (e.g. plywood laminating, veneering). Brand, exact model and detailed technical specifications not confirmed for this specific unit — please contact us for details. Has not been used for several years, but is in operating condition Auction-ID: A7-50988-7

: 0,4-8 mmWorkingpiece thickness from to: 8-60 mmTotal length: 4930 mmFeed speed: 10 m/min.total power requirement: kwWeight: 1500 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0.4-5 mmWorkingpiece thickness from to: 10-50 mmTotal length: 2730 mmFeed speed: m/min.total power requirement: kwWeight: 720 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-5 mmWorkingpiece thickness from to: 6-45 mmTotal length: 4130 mmFeed speed: 11 m/min.total power requirement: kwWeight: 1250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 /8 mmWorkingpiece thickness from to: 10 - 60 mmFeed speed: 8 / 12 m/min.: Ja Flush/radius/chamfer milling units: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 / 10 mmWorkingpiece thickness from to: 10 - 60 mmTotal length: ca. 5.100 mm mmFeed speed: 18 m/min.total power requirement: 13 kwWeight: ca. 2.000 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Spraying device: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 mmWorkingpiece thickness from to: 8-45 mmFeed speed: 9 m/min.total power requirement: 14,5 kwworkpiece length - min.: 140 mmPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : ca. 75.400 : ca. 59.300 mlength in total: ca. 4.700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge  ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Manufacturer: Schäfer Folienkaschiermaschiermaschine, Type: SIK 1250/R,, Year: 1999, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: endlos, Min.-max. workpiece height in mm: 3-40, Working widht max mm: 1300, Working width min min mm: 100, Working widht mm: 1300, Working hight mm: 880, Feeding speed min-max m/min: 3-20, Roller diameter mm: 120, Lamination calender: yes, Diameter of lamination calender in mm: 120, Roller diameter mm: 120, at top and bottom: gummiert, pre-coated foil: yes, Main engine kW: 0,37 , FREE TEXT: inkl. Einlaurollgang und Auslaufrollgang 2 mal 3000 mm, Year :1999

Manufacturer: Comil, Type: Astro 700, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Min.-max. pressing depth in mm: Pressbalken, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Distribution carriage: yes, Pufferband Länge mm: automatisch, Assembly line 1 tall cabinets: 6, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Weight approx. kg: inkl. Auslaufband 800 X 200,

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994

: 0,4-3 / 8 mmWorkingpiece thickness from to: 8 - 50 mmTotal length: 5.360 mmFeed speed: 11 m/min.total power requirement: 7 kwWeight: ca. 2.500 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : Elektrisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.