compressores usadas para venda (468)

Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where th ...

\"Capacity [m3/h] 54 Flowrate [l/min] 900 Tank capacity [liters] 270 Max pressure [bar] 10 Motor power [kW] 7.5 Air preparation station Integrated - VT version (refrigerant dryer, filters) Supply voltage [V] 400 Noise level [dB] 70 The compressor was serviced by GUDEPOL Legnica in 2024 (invoice available for inspection). Since then, it has been sitting unused as a backup, not even connected.\" Auction-ID: A7-40553-6

Motor power: 7.5 kW Nominal flow rate: 1.0 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 900x625x860 mm Estimated weight: about 200 Kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-1

Motor power: 45 kW Nominal flow rate: 7.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1500x1000x1265 mm Estimated weight: about 700 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-4

Motor power: 11 kW Nominal flow rate: 1.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-2

Motor power: 15 kW Nominal flow rate: 1.7 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-3

Compressor de parafuso controlado por velocidade 5,5 Kw FU Velocidade do motor 2000-4000 rpm Pressão 5-13 bar Caudal volumétrico 0,39-0,95 m³/h Comprimento: 87 cm Largura 60 cm Altura 100 cm

1 x compressor Atlas Copco GA 18 1 x Atlas Copco Compressor GX 11 FF 1 cilindro de ar comprimido de 2000 L com sifão condesate 1 x Secador de Refrigeração FD 120 1-2 separadores óleo-água

Compressor de parafuso Atlas Copco GA37VSDFF Inversor e secador integrados 37 kW 12,80 bar 7,37 m3/min Ano de Fabricação: 2012 Horas: 72.651

Compressor de parafuso Atlas Copco GA110VSD+FF Inversor e secador integrados 110 kW 12,75 bar 20,70 m3/min Ano de Fabricação: 2019 Horas: 53.672

Compressor de parafuso 45 kW 7,5 bar 8,90 m3/min Ano de Fabricação: 2019 Horas: 10.603

Compressor de parafuso Kaeser DSD281 160 kW 10 bar 23,50 m3/min Ano de Fabricação: 2003 Horário de funcionamento: 30.437

Compressor de parafuso Alup SCK25-10 18,50 kW 10 bar 2,62 m3/min Ano de Fabricação: 2012 Horas: 18.460

Compressor de parafuso CompAir L55 55 kW 7,5 bar 10,69 m3/min Ano de Fabricação: 2012 Horas: 53.348

Compressor de parafuso Atlas Copco GR110 110 kW 20 bar 12,60 m3/min Ano de Fabricação: 2004 Cjbqey Nl Rmo Da Srwegt Horário de funcionamento: 64.326

Compressor de parafuso Atlas Copco GR110 110 kW 20 bar 12,60 m3/min Ano de Fabricação: 2001 Horas: 44.098

Compressor de parafuso Atlas Copco GA22VSD+FF Inversor e secador integrados 22 kW 12,75 bar 4,51 m3/min Ano de Fabricação: 2015 Horas: 19.431

Compressor de parafuso Inversor e secador integrados. 18,50 kW 12,80 bar 3,35 m3/min Ano de fabricação: 2005 Horas: 20.770

Compressor de parafuso Kaeser CSD122 75 kW 8 bar 12,01 m3/min Ano de Fabricação: 2010 Horas: 19.128

Compressor de parafuso Atlas Copco GA11VSDFF Inversor e secador integrados 11 kW 12,75 bar 1,84 m3/min Ano de Fabricação: 2011 Horas: 50.496

Compressor de parafuso Atlas Copco GA90VSD+ Inversor integrado 90 kW 13 compassos 17,80 m3/min Ano de Fabricação: 2019 Horas: 34.177

Compressor de parafuso de GA45VSD Atlas Copco Inversor integrado 45kW 13 compassos 8,60 m3/min Ano de Fabricação: 2010 Horas: 48.322

Compressor de parafuso Atlas Copco GA45VSDFF Inversor e secador integrados 45 kW 12,80 bar 8,60 m3/min Ano de Fabricação: 2011 Horas: 43.858

Compressor de parafuso Atlas Copco GA30VSD+FF Secador integrado Inversor integrado 30 kW 13 compassos 5,85 m/min Ano de Fabricação: 2014 Horas: 43965

Compressor de parafuso Atlas Copco GA37VSDFF 37 kW 13 compassos 7,25 m3/min Secador e inversor integrados Motor e elemento revistos por volta das 65.000 horas

Compressor de parafuso Atlas Copco GA37VSD+FF. 37 kW com 13 compassos 6,55 m3/min. Inversor e secador integrados Ano de Fabricação: 2015 Horas: 67.772

Compressor de parafuso Atlas Copco ZR400 sem óleo 400 kW 7,50 bar 62,90 m3/min Ano de Fabricação: 2001 Horas: 113.338 Substituiu elementos LP e HP com 92.000 horas de funcionamento. Inquérito Atlas Copco ZR400 utilizado

Compressor de parafusos Kaeser DSD202SFC 110 kW 10 bar 20,30 m3/min Inversor integrado. Etapa 1x trocada Filtro de óleo e óleo novos.

Compressor de parafuso Kaeser DSDX243SFC 132 kW com 8,5 bar e 26,90 m3/min. Inversor integrado. Novo palco instalado por volta das 45.000 horas

Compressor de parafuso sem óleo Atlas Copco ZR75FF Secador integrado 75 kW 8,35 bar 11 m3/min Ano de Fabricação: 2004 Horas: 44.153