desbastadoras usadas para venda (543)

Especificações Eixos: 2 Arranjo do fuso: Inferior (5,5 kW) – Topo (5,5 kW) Largura de trabalho: 220 mm Altura de trabalho: 120 mm Alimentação: 3 kW // 32 m/min Diâmetro do eixo: 50 mm Articulador Rolamentos de contadores Pacote de peças curtas

HIDROMAT WEINIG 22 BL Ano de construção de 1995 com unidade de divisão (serra lamellar) Alimentação (alimentador automático e unidade de retirada!) Com capa de segurança e cabine à prova de som! Especificações da máquina:  - Capacidade de planeamento 220 x 120 mm  - Alimentação, 8 a 80 m/min, motor 18,5 kW Layout do eixo:  Inferior-direita-esquerda Em cima - fundo, mesa rígida Fundo, mesa rígida, eixo preparado Em cima - fundo, mesa rígida, eixo preparado Unidade de lacunas, constituída por 1 direita e 1 eixo esquerdo cada 30 kW (4500 rpm) incl. rolo de mesa, rolo deslizante, barreira de pulverização e remoção da cunha de lacuna 4 rolos pull-out Pressão e acessórios especiais para a produção de ripas de camada superior Alimentador (all-in) para ripas e fita adesiva     

Máquina de perfil de alto desempenho WEINIG, Tipo Hydromat 22 BL Construído em 1995 com unidade de divisão (serra lamella) Alimentação (alimentação automática e unidade de retirada!) Com capota de segurança e cabine à prova de som! Especificações da máquina: - Capacidade de planagem 220 x 120 mm - Alimentação, 8-80 m/min, motor 18,5 kW Layout do fuso: Ligações inferiores à direita Top - fundo, tabela rígida Fundo, mesa rígida, eixo preparado Top - fundo, mesa rígida, eixo preparado unidade gap, constituído por 1 direito e 1 eixo esquerdo 30 kW cada (4500 rpm) incl. rolo de mesa, rolo deslizante, recuo de spray e dissipação de cunha 4 Saque de rolo Impressão especial e acessórios para a produção de locas de camada superior Alimentação (divisor) para as lotas e fita adesiva

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kWSpindle speed 6000 rpmVariable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mmDriven table rollerMechanical/digital read-out Centralised lubrication CE sound/safety hoodInterior lightHopperfeed EM 11, upt to 60 cycles/minWorkpiece length: 350 to 3000 mmWorkpiece width: 20 to 230 mmWorkpiece thickness: 12 to 70 mmAir requirement: 8 bar, connection DN8Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/sTooling not included

Capacity: 230 x 130 mm.Number of shafts: 9Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kWKardan drivePneumatic pushersFront surface tableFeed rollers for short workpiecesManually operated pump for bed lubricationShaft diameter: 50 mm.Powered rollers in the tableFeed: 6 - 36 m/minMotorized height adjustment

Capacity: 230 x 130 mm.Spindles: 7Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kWspindles 2, 3, 4 and 5 are 8000 tr/minstraight jointer on 2nd bottom spindleCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short pieces0,8 m infeed straightening tablemanual bed lubricationSpindle diameter: 50 mm.5 driven rollers in tableFeed: 6 - 36 m/min, motor 7,5 kWmotor height adjustment

Capacity: 220 x 120 mm.Spindles: 5Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kWSpindle diameter: 40 mmMotorised thickness adjustment, motor 1,5 kW digital displayInfeed table1700 mm longSiko reading on the shaft positioningProtective hood with electrical contactExtension 5 x 140 mm

Maximum feed width: 800 mmMaximum feed height: 230 mmVariable feed speed: 8 - 20 m/minPlaning head with 4 bladesExtraction diameter: 200 mmMotor 5.5 kW

Useful width: 520 mmMax pass: 300 mm Motorised table rise and fallAnti-kick-back safety device4-knife cutterblockMotor 4 kW

Capacity: 180 x 100 mm.Spindles: 4Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kWMotorised thickness adjustment4 cutterblocks ChaindriveInfeed table 1m70. long

Capacity: 260 x 130 mm.Spindles: 5Shaft diameter 40 mmBottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kWCardan shaft drivePneumatic pressuresFeed speed variable, motor 3 kWMotorised height adjustment of top presssure beamInfeed table 2200 mm lengthtools not included

Capacity: 230 x 120 mm.Spindles: 4bottom 4 kw fence and near 5,5kWtop 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kWPneumatic pressuresInfeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed tableIn the machine 4 driven feedrollersHardened table (with exception of the infeed table)Separate controll cabinet and electrical cabinetAutomatic bed lubricationPneumatic pressuresOutfeed table with height adjustment 0/0,5/1 mmSound enclosure with electromagnetic securityCapacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm)Feedspeed: 6 - 36 m/min, motor 7,5 kWNumber of spindles: 8Spindle diameter: 50 mmSpindle speed: 6000 rpmBottom 7,5 kW, outboard bearingFence 7,5 kWNear 11 kWFence 11 kWTop 15 kW, outboard bearing, straight jointerBottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm)Top 11 kW, table prepared to take wooden insertsBottom 11 kW, outboard bearing, straight jointer

Capacity: 230 x 125 mm.Number of axes: 4Axis diameter 40 mmBottom 6.3 kW, right/left 7.5 kW, top 7.5 kWMobile axis for various widthsPneumatic pressersVariable feed speedMotorized height adjustment of the top barFeed table 2000 mm lengthKnife heads included

Four-sided planerWorking height: 740-750 mmMax working width: 305 mmMin working width: 50 mmMax workpiece height on 2 sides: 310 mmMax workpiece height on 4 sides: 160 mmMin workpiece height: 17 mmFeed speed steplessly adjustable: 10-60 m/minmotors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kWfeed motor: 7.5 kWmotor height adjustment: 1.5 kWspeed 5,500 rpmdriven top and bottom feed rollers

width of the table: 400 mmlength of the table: 2450 mmfence can be tilted4 knive cutterblockmotor 3 kW

This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details.

Koelle Edge Planer Modelo FKF 51 Construído em 1993 espessura máxima do material 45 mm, Tamanho da máquina L 304 x W 65 x H 87 cm, Cabeça de união com faca reversível de carboneto telemóvel Peso aprox. 360 kg A máquina está em boas condições, pronta para uso. Sujeito a alterações, erros, venda prévia! Peças de reposição por MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC sistema+technik GmbH Engenharia mecânica Eisenbahnstrasse 25 CH-4900 Langenthal/Suíça Telefone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Máquina de planos de quatro lados Harbs 250 x 150 mm 7 eixos 350 horas de tempo de descanso 3 m1 mesa de vestir 8 rolos de alimentação recém-borracha Cama ranhurada A máquina é praticamente tão boa quanto nova, pronta para funcionar Alterações, erros, venda intermédia reservada! Peças de serviço/peças sobressalentes por MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Sistema MATEC technik GmbH engenharia mecânica Tapete de moinho 4 CH-4952 Eriswil/Suíça Telefone 0041 62 966 18 32 fax 0041 62 966 21 12

This GRIGGIO G 240P/5U was manufactured in 2007. It features a maximum planing width of 240mm and height of 160mm, accommodating workpiece sizes up to 240 x 160mm. Equipped with five spindles, including a universal turning shaft, and spindle speeds up to 6000 rpm. The machine allows smooth feed adjustments up to 30m/min. Weighs 4100kg with dimensions of 440x220x180cm. Contact us for more information about this machine.

working width: 530 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2900 mm; adjustment table: Hebel; read out out table height: Scala; surface fence tiltable: ja; motor power: 4 kW; machine length: 2900 mm; machine width: 1000mm; weight: 800 kg;

working width: 500 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2800 mm; table adjustment: lever; read out table height: scala; sourface fence adjustable: yes; motor power: 5,5 kW; machine length: 2800 mm; machine width : 1000mm; weight: 900 kg;

working width: 510 mm; cutter head: strip knive; number of blades: 2; surface table length: 2600 mm; adjustment table: hydraulic; Hollow and pointed joints adjustment: ja; read out table hight: Scala; read out Hollow and pointed joints: Scala; fence tilting: yes; motor power: 5,5 kW; motor brake: yes, automatic; machine length: 2600 mm; machine width: 1000mm; weight: 1050 kg;

working width: 500 mm; cutter head: strip knive; number of blades: 4; surface table length: 2700 mm; adjustment surface table: Hebel; read out: table height; fence tilting: yes; motorpower: 4 kW; motorbrake: yes, automatic; machine length: 2800 mm; machine width: 1000mm; weight: 1050 kg;