máquinas de soldagem usadas para venda (1,749)

intensividade atual: 400 Tensão de circuito Aopen: 65-75 VIP classe de proteção: IP21 Permissible loadat 35% duty cycle 400 Aat 60% duty cycle 315 Aat 100% ciclo de serviço 250 AIdle power 0,49 kWApplication class: S- Água arrefecida- Com controlo remoto da mão e do pé- Embalagem da mangueira aprox. 6000 mm

weight max. in kg: 1250 kgWorking height minimal: 540 mmWorking height maximum: 1120 mmtable diameter: 800 mmswivelling range: --> 95 Gradmax. torque: 490 Nmtable rotation speed: 2 U/minWorking height from to: 540 - 1120 vertikal mmWorking height from to: 700 - 1280 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 757 kgdimensions of the machine ca.: 1,76 x 1,63 mHydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 2 tswivelling range: --> 95 Gradmax. torque: 1250 Nmtable rotation speed: 2 U/minWorking height from to: 550 - 1300 vertikal mmWorking height from to: 650 - 1400 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 930 kgdimensions of the machine ca.: 1,85 x 1,66 mElectric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidade: 5 Kg dimensãointernal: 100 x 75 x 450 mmoutoutout: 0,4 kwfrescos: 220 - 2 Dispositivo de colocação V40: 30 - 180 Gradpesos: 10 kgdimensionais: 570 x 200 x 150 mm

number: 57 Positionenweight: 98 kgcondition: neu : 28 mmSet 2: 57 pieces, 28mm system, consisting of:Clamps: 6 x 280610.NClamps: 4 x 280630.NPrism: 4 x 280648.1.NBolt: 18 x 160511Magnetic bolt 4 x 280740Stop: 6 x 280410.NStop: 6 x 280420.NAngle: 4 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAccessory set. 1 x 283999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

número: 29 Positionen: 16 mmcondicion: neu peso: 11 kgset 1 29 peças, sistema de 16mm, Composto por:Clamps: 4 x 160610Bolt: 12 x 160511Stop: 4 x 160420.NAngle: 4 x 160108.NAngle: 4 x 160110.NAcossory. 1 x 163999Price plus embalagem e transporte.

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,38 tdimensions: 2,0 x 1,0 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,35 tdimensions: 1,2 x 0,8 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nível de proteção: 9 - 13 MProvisionamento de potência: 2 x CR2032 3Vpesos: 460 Gramamdimensionais: 250 x 270 x 230 mm

volume capacity: 2500 m3/h0: 3000 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,08 tdimensions of the machine ca.: 0,58x0,58x0,58 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,1 - 1,25 U/minmax. torque on the faceplate: 900 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,37 + 0,75 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,55 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 850 - 900 mmweight of the machine ca.: 0,45 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.Very sturdy base, so theTable can be moved with a pallet truck.The accessories shown are optional!Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,5 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional Extreme 850 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 850 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table top,parallel hole arrangement in 50 mm grid on the sides.Including basic equipment. Accessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional Extreme 850 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 850 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table top,parallel hole arrangement in 50 mm grid on the sides.Including basic equipment. Accessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,5 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,8 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 55 Positionen: 16 mmcondition: neu weight: 23 kgSet 2 55 pieces, 16mm system, consisting of:Clamps: 6 x 160610Clamps: 2 x 160630Prism: 4 x 160645.1.NBolt: 18 x 160511Stop: 4 x 160410.NStop: 6 x 160420.NAngle: 6 x 160108.NAngle: 6 x 160110.NAngle: 2 x 160162.NAccessory set. 1 x 163999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,3 tdimensions: 1,0 x 1,0 x 0,85 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17-19.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,Side walls 150mm with parallel hole arrangement in a 25 mm grid.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.Other dimensions available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nível de proteção: 9 - 13 MProvisionamento de potência: 3 Voltpesos: 2 kgdimensionais: 300 x 240 x 240 mm

corrente de soldadura: 10 - 180 Tensão de circuito Aopen: Frequência de carga ligada v: 230 Vpeso: 6,8 kgDimensions (LxWxH): 403 x 153 x 264 mmAccessias para máquina de soldadura a gás inerte:Hose pacote 4m. Cabo terra 4m Acessórios para máquina de soldadura a gás inerte:Hose pacote 4m. Cabo de terra 4m Fio de soldadura 1 rolo Manómetro de pressão Fio de cobertura 1 rolo Manómetro de pressãoCom o bocal e o bocal de gásAlfissal: 2200, -EUR

Nível de proteção: 4 - 12 MProvisionamento de potência: 2 x CR2032 peso: 460 Gramamdimensionais: 250 x 270 x 230 mm

diâmetro da tabela: carga 450 mm: waagerecht 300 Kgvela: senkrecht 150 Kgveladas de giro: 0,2 U/minvoltage: 230 V / 50 Hztotal power requirement: 0,5 5 kWpelho da máquina ca.: 80 KGdimensionais da máquina ca.: 0,65 x 0,5 x 1,0 m5) máquina de estoque não uusida• Ajuste de inclinação manual• Start-Stop by foot switch• com CE

Comprimento da tabela: largura 590 mm: 590 mmse: 200 Kgvelas de viragem: 0,23 - 2,3 U/minse de altura: 650 mmdesempato à potência: 0,55 kWpelho da máquina ca.: 600 Kg

operado manualmente, arrefecido a ar Potência nominal a 50%ED: 2.4kVA Corrente de curto-circuito: 7.5kA Força de elétrodo máx.: 180daN Projeção: 250mm --- equipado com: - Cabo de ligação de 5m - Braços de elétrodos padrão 250mm Controlo RS15 (opcional) --- Garantia 6 meses --- Formação + comissionamento a pedido --- Elétrodos de soldadura à vista + peças sobressalentes disponíveis a partir de stock

Especificações: - Corrente de soldadura 300 A 60% ED - 230 A 100% ED - Corrente de soldadura ajustável de 10 A a 300 A - Consumo corrente 400 V / 19,5 A / 10,7 kVA - com: - Cabo de soldadura E.- - Cabo de terra - Cabo de ligação - Requisito de espaço aprox. W 600 x H 900 x D 1000 mm - Peso aprox. 180 kg

Fio sólido enrolado em camadas para soldadura sob gás inerte em todas as posições. Tipos de gás de proteção: Ar, CO2 / Ar, CO2, O2 /CO2. Elétrodo de fio MAG de rolo de soldadura, não usado, original enrolado em folha, ovp em cartão! 15kg 1,2mm União de Fabricantes Tipo A600IG Provavelmente para soldadura de deposição Vários disponíveis. Para uma aceitação completa de preço especial! Preço especial!

Especificações: - Corrente de soldadura 315 A 80% ED - 280 A 100% ED - Corrente de soldadura ajustável de 50 A a 315 A - Consumo corrente 400 V / 19,5 A / 10,7 kVA - com: - Cabo de soldadura E.- - Cabo de terra - Cabo de ligação - Requisito de espaço aprox. W 600 x H 900 x D 1000 mm - Peso aprox. 200 kg