Máquinas dobladoras (50)

Key data: 3500 mm, 12 mm

Schäfer SVRM 3500/12 - Máquina CNC de curvatura de 4 rolos - Controlo CNC Siemens com joystick para posicionamento de rolos e display digital (renovado em 2006) - Inclinação hidráulica do rolo superior pelo painel de controlo - Rolos feitos de material temperado e temperado com resistência de 900 N/mm² - Ano de construção: 1989 Dados técnicos - Largura máxima da folha: 3500 mm - Comprimento do fardo dos roletes: 3550 mm - Espessura máxima da folha de flexão: 12 mm - Espessura máxima da folha a curvar 4xS/3xS: 8 / 6 mm - Limite máximo de inserção das folhas a 20% de fortalecimento: 380 N/mm² - Diâmetro do rolo superior e inferior: 360 mm - Diâmetro do rolo lateral: 290 mm - Menor raio a alcançar: 220 mm - Velocidade de avanço rolo mais baixo: 200 mm/min - Rolos laterais de velocidade de avanço: 700 mm/min - Capacidade total instalada: 22 kW - El ...

Auction-ID: A1-45239-2193

Oferta 26018 Dados técnicos: - Comprimento máximo de trabalho 500 mm - Espessura máxima da folha 1,5 mm - Vários diâmetros de rolos - Transmissão – motor de travão 400 V / 1,4 kW - Requisito de espaço aproximado. L 850 x P 1700 x H 1250 mm - Peso aproximado. 0,8 t - Fixações de rolos 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

Tube capacity Ø 80-250mm, tube length max. 1100mm, material thickness: 0.4-0.6 mm (1.5mm), equipped with Pallet ball roller table with pneumatic stacker, max. Stacking height: 360mm, max. Stack weight: 2000 kg, 1 pneumatic feed brush table, 1 mobile discharge table, control box, SIEMENS operator panel and fencing protection Auction-ID: A1-43985-4

Key data: 1020 mm, 1 mm

Máquina de dobra redonda de 3 rolos, com inserções de fio, sulco de junção, A máquina é reparada, verificada, limpa por um especialista e depois está totalmente funcional. É realizado um teste. Comprimento de trabalho: 1020 mm Espessura máxima da chapa do aço: 1,25 mm Cor: verde Peso: 220 kg Dimensões: 1290 x 600 x 1050 mm Número de rolos redondos: 3 peças Diâmetro do rolo: 55 mm Número de máquina 1685

sheet width: 4000 mmplate thickness: 30 / 35 mmpre-bending: 30 mmdiameter of upper rolls: 570 mmside roll diameter: 450 mmdiameter of lower rolls: 540 mmbending speed: 4 m/minmin. bending diameter: 650 mmtotal power requirement: 60 kWweight of the machine ca.: 52 todimensions of the machine ca.: - mThe machine was overhauled in 2022Equipment:- Hydraulic 4-roller round bending machine- Roll material: 61 MnCrMo 43- Driven rolls: 2 Top-and bottom roll-- Drive: over 2 hydro motors direct flanged-- Adjustment speed bottom roll: 0-200 mm/min-- Adjustment speed side rolls: 0-700 mm/min- Speed compensation between top-and bottom roll: automatic- Operation of the tilting bearing: hydraulic- Tilting of the top roll: hydraulic- Bearing block: hydraulic- Indicator device of roll position: digitalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2540 mm, 8 mm

Comprimento máximo de flexão: 2540 mm Espessura máxima da chapa: 8 mm de aço Diâmetro do rolo superior: 200 mm Rotação no sentido dos ponteiros do relógio e no sentido contrário aos ponteiros do relógio através do pedal Guincho de corda de segurança Provas cónicas possíveis Alimentação motorizada traseira por rolagem Redução da alimentação do rolo através do volante manual com indicador de posição Peso: aprox. 4.500 kg

sheet width: 3100 mmplate thickness: 6.0 mm STpre-bending: 4.0 mm STdiameter of upper rolls: 200 mmside roll diameter: 165 mmdiameter of lower rolls: 190 mmbending speed: ca. 5.0 m/minControl: DIGI oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 6.0 kWweight: 6000 kgrange L-W-H: 5250 x 1500 x 1400 mm very good condition () Current new price approx. 80,000 euros Special price on requestFeatures:- Robust electro-hydraulic 4-roll bending machine 4-roll concept offers a wide range of bending and rounding options- MG swivel control panel Operation - control of all rolls and machine axes Digital position display Manual operation via joysticks- Two central rolls are driven directly by hydraulic motors- Conical rolling possible via inclined position of the rolls- Parallelism of the side rollers via torsion shafts- Bending on both sides- Diameters of up to 1.1 times the upper roller ...

Key data: 1520 mm, 3 mm

Máquina de dobra redonda assimétrica de 3 rolos com 2 motores Rolo inferior coroado 110 mm diâmetro Rolo superior (swing-out) coroado com 90 mm de diâmetro Rolo traseiro (motorizado ajustável com visor digital) coroado 110 mm de diâmetro Interruptor de pé duplo Peso aprox. 1200 kg

Bending length: 4200 mmpre-bending: 34 mmBending strength: 38 mmpower capacity: kWNumber of rollers: 4 StkAdjustable rollers: Stkdiameter of upper rolls: 540 mmdiameter of lower rolls: 500 mmside roll diameter: 365 mmwork speed: 0 - 8 m/mintotal power requirement: 55 kWweight of the machine ca.: 35 tControl: Haeusler Bendtronic 2.0 dimensions of the machine ca.: 7.5 x 2.1 x 2.4 mEquipped with:- Haeusler BENDtronic 2.0 control system- Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending onspringback)- Roller bearings: Self-adjusting roller bearings- Max. cylinder force against upper roller: 3,245kN- Roller material: 42CrMo4 (1.7225)- Speed compensation between upper and lower roller: automatic whenthe two-roller drive option is selected- Roller adjustment: hydraulic- Tilting of the lower roller and both side rollers for cone bending: infinitely variable from th ...

N.º : 8806 Tipo: XZMP 3150/16 Produtor: PIESOK Criado: 1982 Parâmetros: Rolos de comprimento de trabalho: 3150 mm Espessura máxima da folha: 16 mm Número de rolos acionados: 3 peças Peso: 40000 kg

sheet width: 2600 mmplate thickness: 10,0 mmpre-bending: 8,0 mmdiameter of upper rolls: 230 mmside roll diameter: 190 mmdiameter of lower rolls: 210 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5.560 kg.range L-W-H: 4.650x1.380x1.300 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Número : 8711 Tipo: MG 2000 x 25/20 Produtor: Maqfort Criado: 1998, GO 2016 Parâmetros: Rolos de comprimento de trabalho: 2000 mm Espessura máxima da folha: 25 mm

sheet width: 3100 mmplate thickness: 13,0 mmpre-bending: 10,0 mmdiameter of upper rolls: 300 mmside roll diameter: 210 mmdiameter of lower rolls: 270 mmtotal power requirement: 11,0 kWFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Esta oferta destina-se exclusivamente a empresários na aceção do § 14 do BGB. O preço é líquido acrescido de 19% de IVA. Fabricante: LECHNER Maschinenbau e.K. Tipo: 3100/110 Ano de Marca: 2020 Tensão: 400V Consumo de energia: 1,5 kW Conexão de alimentação: 3 fases, zero, PE Diâmetro superior do rolo: 60 – 100mm Comprimento máximo de trabalho: 1100mm Capacidade nominal: 3.2mm (espessura da folha) Alimentação: 5m/min Todas as informações são feitas da melhor forma possível, salvo erros. A venda está sujeita à exclusão de qualquer garantia. A exclusão não se aplica a reclamações por danos decorrentes de negligência grosseira ou violação intencional dos deveres do Vendedor ou a qualquer lesão à vida, à integridade física e à saúde. Outras questões jurídicas Informações podem ser encontradas no site da Witzenmann GmbH sob as pa ...

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 m4-ROLL Hydraulic Plate Rolling MachineWorking length 3100 mmMaximum thickness Pre-bending 40 mmBending 50 mmYield Point: 240 N/mm2Number of rolls 4Motor Power 55 kWMin. diameter mm - Ø Top Roll Diameter x 3Top roll Ø 540 mmBottom roll Ø 510 mmSide roll Ø 440 mmLength 6700 mmHeight 3000 mmWidth 3000 mmWeight 40.000 kgWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelDual bending speedsElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls ...

Key data: 2040 mm, 1 mm

com ranhura de desconto no veio superior, com roda de aço e escala, construção sólida e estável, com inserções de arame, alimentação de 70 mm do rolo traseiro, A máquina é reparada, verificada, limpa por um profissional e, em seguida, é totalmente funcional. O teste é realizado. Largura da folha: 2040 mm Espessura da folha: 1,0 mm Cor: verde Peso da máquina: 600 kg Dimensões: 2200 x 650 mm Diâmetro:. 70 milímetros Número da máquina: 8413105

comprimento da placa: 1550 mmespessura da placa: 3,5 mmnúmero de rolos: 3 diâmetro do rolo: 120 mmnecessidade de potência total: 2,2 kWpeso da máquina ca.: 750 Kgdimensões da máquina ca.: 2,2 x 1,5 x 1,6 mRolo redondo operado eletricamente através da alavanca do pé, resistente, suporte de construção soldada, rolo traseiro ajustável para flexão cônica, Os rolos são endurecidos,O rolo superior pode ser girado para remover a peça.

Key data: 1000 mm, 1 mm

com ranhuras de desconto e ranhuras de inserção de arame A máquina é reparada, verificada, limpa por um profissional e, em seguida, é totalmente funcional. O teste é realizado. Largura da folha: 1000 mm Espessura da folha: 1,0 mm . Cor: azul Peso da máquina: 45 kg Requisito de espaço: 1200 x 400 x 1000 mm Diâmetro do eixo: 50 mm

sheet width: 3000 mmplate thickness: 50 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comprimento máximo de flexão: 2000 mm Espessura máxima da chapa: aço de 8 mm Rotação no sentido horário e anti-horário Alimentação motorizada do rolo traseiro Interruptor de segurança Rodadas cônicas possíveis

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,450 tdimensions of the machine ca.: 3830 x 1160 x 1180 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dados técnicos: - dobrar e rolar à mão, - largura máxima de trabalho 1020 mm - máx. espessura do material St 40 1,25 mm - Regulação do ângulo de flexão através do paragem final 10 - 180 ° - max hub parte superior da bochecha aprox. 85 mm - máx. bochecha ajustável 20 mm - Diâmetro do eixo 55 mm - O eixo superior pode ser girado - Eixo traseiro paralelo + obliquamente ajustável - Requisito de espaço aprox. W 1500 x H 1400 x D 750 mm - Peso aprox. 400 kg

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 24mm total power requirement: 45+22 kWweight of the machine ca.: 43 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comprimento de flexão: 1070 mm Capacidade de flexão: 3,0 mm Rolo: 95 mm Velocidade do rolo: 9 rpm Potência do motor: 1.1 kW Peso: 370 kg Dimensões: 1350 x 760 x 1250 mm

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 37 kWweight of the machine ca.: 20,5 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comprimento do rolo: 1250 mm Espessura da folha máx. 1,25 mm Diâmetro do rolo: 60 mm Comprimento: 1780 mm Profundidade: 550 mm Altura: 1030 mm Peso: aproximadamente 230 kg O preço é líquido, mais IVA, casa livre 1 endereço Alemanha (sem ilhas).

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 35mm total power requirement: 45+22 kWweight of the machine ca.: 35 tdimensions of the machine ca.: 5684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 40mm total power requirement: 2x37+30 kWweight of the machine ca.: 45 tdimensions of the machine ca.: 6085 x 2630 x 2787mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 50mm total power requirement: 45+45 kWweight of the machine ca.: 72 tdimensions of the machine ca.: 6370 x 3240 x 3660mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 22 kWweight of the machine ca.: 16,65 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 10mm total power requirement: 15 kWweight of the machine ca.: 10,6 tdimensions of the machine ca.: 5310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 30 kWweight of the machine ca.: 15,15 tdimensions of the machine ca.: 5010 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13 total power requirement: 15 kWweight of the machine ca.: 8,84 tdimensions of the machine ca.: 4760 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 4mm total power requirement: 5,5 kWweight of the machine ca.: 2920 tdimensions of the machine ca.: 3600 x 970 x 1140mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm (s) total power requirement: 30 kWweight of the machine ca.: 13950kg tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 18,5 kWweight of the machine ca.: 9,6 tdimensions of the machine ca.: 4760 x 1660 x 1140mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 20mm total power requirement: 30 kWweight of the machine ca.: 18,3 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 20mm total power requirement: 37+22 kWweight of the machine ca.: 39 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6mm total power requirement: 11 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4880 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 14,1 tdimensions of the machine ca.: 6310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13mm total power requirement: 22 kWweight of the machine ca.: 21,3 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,570 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4260 x 1160 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 30mm (S) total power requirement: 37 kWweight of the machine ca.: 15,3 tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16 total power requirement: 37 kWweight of the machine ca.: 23,81 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6 total power requirement: 7,5 kWweight of the machine ca.: 4,340 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 9,7 tdimensions of the machine ca.: 5310 x 1660 x 1590 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 18,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4260 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD 0: 20mm (s) Ampullen/h0: mm0: mmtotal power requirement: 22 kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: 4260 x 1660 x 1590 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.