máquinas e equipamentos para engenharia de processo usadas para venda (7,503)

Manufacturer: Kautex Model: KBS2-20/40-S90/22D Year of Manufacture: 1999 PLC control: Siemens S5 Grinder: Rapid 3545 Conveyor Material feeding system Piovan Dedusting system Piovan Automatic component gripper and scale Spare parts Control Voltage: - AC: 230 V - DC: 24 V Working Voltage (AC, 3-phase): - Drive I: 400 V - Drive II: 400 V - Heating: 400 V Frequency: 50 Hz Rated Current: - Drive I: 285 A - Heating: 70 A Maximum Fuse Rating: - Drive I: 315 A (time delay) - Heating: 100 A (fast acting) Find more here - / Contact us at -

Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -

Manufacturer: Krauss Maffei Model: 80-390-C2 Year of Manufacture: 2001 Type of Machine : Hydraulic Injection Molding Machine Tonnage (Clamping Force): 80 t Tie Bar Distance (H x V): 405 x 405 mm Platen Size: 610 x 610 mm Ejector Hole: Centre Knee Lever: No Minimum Mold Height: 250 mm Maximum Mold Height: Not applicable Opening Stroke: 750 mm Screw Diameter: 35 mm Shot Weight: 140 g Core Functions: 2 Handling System: No Electrical Data Operating Voltage: 400 V, 3-phase Frequency: 50 Hz Total Current (Iges): not specified Motor Current (In Motor): 97 A Heating Current (In Heating): 117 A Single Motor Current: 37 A Fuse Protection: - Motor: 100 A - Heating: 125 A Find more here - / Contact us at -

Manufacturer: Cofely Model: Quantum II X030 Year of Manufacture: 2015 Type: Industrial refrigeration/chiller system Refrigerant: R134a Refrigerant quantity: 100 kg MAXIMUM OPERATING PRESSURE High pressure (HD): 18.3 bar / 63 °C Low pressure (ND): 18.3 bar / 63 °C OPERATING LIMITS Evaporator - Water side pressure: max. 10 bar - Flow rate: 22.3–53.6 m³/h - Outlet temperature: 3–20 °C - Inlet temperature: 7–25 °C Condenser - Water side pressure: max. 10 bar - Flow rate: 28.6–68.5 m³/h - Outlet temperature: 20–56 °C - Inlet temperature: 15–52 °C MAIN COMPONENTS Turbo Compressors - Model: TT300-H6-1-ST-E-O-CE - Cooling capacity: 300 kW - Power consumption: 2 × 51 kW - Max. current per compressor: 140 A - Voltage: 400 V - Frequency: 50 Hz - Manufacturer: Turbocor Inc. Evaporator - Model: VRMH46.60.180.4 - Evaporating temperature: 9 °C - Volume flow chill ...

Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - / Contact us at -

We have two grain unloaders capable of discharging vessels with a draft of up to 17 meters (approximately 100,000 DWT). One unit is a mechanical unloader and the other is a pneumatic unloader. Details are as follows: Manufacturer: Bühler Year of Manufacture: 1983-1985 Mechanical Chain Transporter HM1-T1 + HM2-T1 Transporter type: HL-SKT RSH-450 Feed capacity: 1000 t/hour grain Total length: 28.1 m Chain speed: 2.28 m/s Drive shaft speed: 37.7 rpm Torque on drive shaft: 40,200 Nm Drive power at shaft: 164 kW Drive system: two hydro motors on each drive shaft Hydraulic motor type: MK 43-09200-CO-RN Absorption capacity: 9.2 liters per rotation Specific torque: 147 Nm/bar Nominal torque: 20,100 Nm Nominal pressure: 156 bar Chain Transporter in Boom HM1-T2 + HM2-T2 Transporter type: BKT 1210/290 142V 002 TWIN Feed capacity: 1000 t/hour grain Total length: 33.2 m Chain sp ...

Manufacturer:Prozap Type of Machine : EK0 Assembly line station Year of Manufacture: 2023 Power supply: TN-S Voltage: 400 V, 50 Hz Current: 40 A Power: 15 kW Pneumatic pressure: 4.5 bar Weight: 1600 kg Certifications: ISO 9001, CE Find more here - / Contact us at -

Manufacturer: Prozap Model: EK0 Bushing Assembly Year of Manufacture: 2023 Power supply: TN-S Voltage: 400 V, 50 Hz Current: 15 A Power: 8 kW Pneumatic pressure: 6 bar Hydraulic pressure: 255 bar Weight: 6000 kg Certifications: ISO 9001, CE Find more here - / Contact us at -

Manufacturer: Lutzke Year of Manufacture: 2008 Type of Machine : Adhesive Bonding System Find more here - / Contact us at -

Board machine Type: Tronic 140/90-22 Manufacturer: OMAG Year: 1996 The board machine built in 1996, has been operated continuously since it was commissioned in 1997. For sale is not only the block machine itself but also the entire production line, allowing full use of the system after purchase. Several components of the mixing plant (e.g. core and face mix mixers), the bucket conveyor, wet side, transfer platform, dry side, and package buffer were renewed in 2009. The block machine remained in operation until the end of 2024 and can be inspected in fully functional condition. MACHINE DATA Block forming machine Board machine manufactured by OMAG, type TRONIC 140/90-22, year of manufacture 1996 Production of core and face mix Control system: Simatic S5 with visualization by Frima Board size: 1,400 × 1,000 mm Cross cleaning Quick mould clamping, pneumatic Sheet pulling dev ...

For Sale: Mahler Continuous Furnace with Güntner Cooler Mahler Continuous Furnace - Manufacturer: MAHLER - Type: DLE 800/220/3000 G - Heat Power: 172 kW - Nominal Temperature: 1120 °C - Year of Construction: 2014 - Certification: CE Güntner Cooler - Manufacturer: Güntner - Model: GFDC WD 080.1/14-42-3980105M - Year of Manufacture: 2021 - Volume: 133.6 liters - Max. Permissible Pressure: 10 / 0 bar - Permissible Temperature Range: -50 °C to +100 °C - Ambient Temperature Range: -30 °C to +50 °C - Fan: VT03061U.1 / 2448 / 630 min⁻¹ / 2.1 A - Test Pressure: 11 bar (Compressed air) - Test Date: 2021-03-15 - Fluid Group / State: 2 / Liquid Find more here - / Contact us at -

video control station The VCPevo / VCP Evolution (often written VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is available in different models and can easily be integrated into any automation solution.” nela.de Fin ...

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -

Battery Production Facility Manufacturer: Aumann Year: 2016 Condition: Used – good working condition 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14  ...

Manufacturer: Bottero Model: TRANSFER 500P Year of Manufacture: 2018 Voltage: 400 V Frequency: 50 Hz Rated Current (In): 3 A Mass: 1000 kg Minimum size : 140mm Max. size : 2000mm Thicknesses from 3mm – 19mm They have also ground 2mm glass several times. Find more here - / Contact us at -

Manufacturer: Walter Metz Type of Machine : Container Washing System Condition : New Compatible with pallets and large four-wheel containers (660L & 1100L) Find more here - / Contact us at -

Manufacturer: Aerzener Model: GM60S Year of Manufacture: 2017 Type of Machine : Positive Displacement Blower Suction Pressure (max., abs.): 1.013 bar Discharge Pressure (max., abs.): 2.013 bar Nominal Motor Power: 132.00 kW Unit Weight: 2548 kg Certifications: CE, EAC Find more here - / Contact us at -

Manufacturer: Aerzener Model: GM7L Year of Manufacture: 2019 Type of Machine : Positive Displacement Blower Max. Suction Pressure (abs): 1.013 bar Max. Discharge Pressure (abs): 1.413 bar Nominal Motor Power: 7.50 kW Unit Weight: 294 kg Find more here - / Contact us at -