máquinas injetoras usadas para venda (813)

Key data: 3500 , 70

Key data: 3500 , 1212 , 70

Diâmetro do parafuso; 70 milímetros Volume injetável / Volume de disparo: 1212 cm3 Pressão de injeção: 1877 bar Passagem da coluna / barra de amarração Bettween: 810 x 710 mm Espessura da carrapatura do molde: 380 mm máx.: 820 mm Curso de abertura: 710 mm Tração do núcleo: 2 Interface do robô: sim / Sim E67 Opções:

Key data: 2000 , 678 , 60

Diâmetro do parafuso; 60 milímetros Volume injetável / Volume disparado: 678 cm3 Pressão de injeção: 2000 bar Passagem da coluna/barra de amarração Bettween: 570 x 570 mm Espessura do tickness do molde: 250 mm max: 550 mm Curso de abertura: 450 mm Tração do núcleo: 2 Interface do robô: sim / Sim E67 Opções: 12 Zonas chauffe - 12 vias de aquecimento

Diâmetro do parafuso; 55 milímetros Volume injetável: 427 cm3 Pressão de injeção: 1720 bar Passagem entre colunas: 570 x 570 mm Espessura mínima do molde: 250 mm máx: 750 mm Curso de abertura: 600 mm Núcleos: 2 Interface do robô: NÃO Opções: Motor elétrico de dosagem

Key data: 2000

Espaçamento do bico: 100 mm Diâmetro do parafuso: H260: 38 H470: 45 mm Volume injetável:H260: 168 H470: 278 cm3 Pressão de injeção: H260: 1564 H470: 1659 Largura da coluna: 610 x 610 mm Espessura do molde: 280-760 mm Curso de abertura: 560 mm Núcleos:: 2 Interface do robô: Sim Possibilidade de uma base giratória GROSFILLEY

Key data: 3200 , 60

Diâmetro do parafuso: 60 mm Volume injetável: Pressão de injeção: Passagem entre colunas: 735 x 735 Espessura do molde: min: 330mm- max: 680 Curso de abertura: 660 mm Número de núcleos: 2 Interface do robô: E67

Key data: 5500

Diâmetro do parafuso; H3500 - 85 mm / H2000- 65 milímetros Volume injetável: H3500 - 946 cm3 / H2000- 511 cm3 Pressão de injeção: H3500 - 1509 bar / H2000-2228 bar Largura da coluna: 930 x 930 mm Espessura mínima do molde: 300 mm máx.: 1000 mm Curso de abertura: 1100 mm Núcleos: 4 Interface do robô: Sim Opções: Fixação automática 24 zonas aquecidas

Key data: 1100 , 40

Diâmetro do parafuso; 40 milímetros Volume injetável: 201 cm3 Pressão de injeção: 1859 bar Gira-discos: 1040 mm Espessura do molde min: 300 mm máx: 600 mm Núcleos: 3 Interface do robô: Sim Zonas de aquecimento de moldes: 8

Key data: 500 , 30

Diâmetro do parafuso; 30 milímetros Volume injetável: 99 cm3 Pressão de injeção: 1450 bar Dimensões das bandejas: 920 x 400 mm Espessura mínima do molde: 190 mm máx.: 520 mm Curso de abertura: 330 mm Núcleos: 3

Diâmetro do parafuso; 55-35 milímetros Volume injetável: 558 - 139 cm3 Pressão de injeção: 2380-2500 bar Largura da coluna: 630 x 630 mm Espessura do molde min: 300 mm máx: 600 mm Curso da abertura: 600 mm Núcleos: 2 Interface do robô: Sim Opções: Base rotativa: Arburg 243849 ano: 2012

Key data: 3200 , 700 , 60

Diâmetro do parafuso; 60 milímetros Volume injetável: 792cm3 Pressão de injeção: 2500 bar Largura da coluna: 720 x 720 mm Espessura mínima do molde: 300 mm máx.: 700 mm Curso da abertura: 700 mm Núcleos: 3 Interface do robô: SIM Opções com robô ARBURG

Key data: 13000 , 4200 , 110

Diâmetro do parafuso; 110 milímetros Volume injetável: 4370 cm3 Pressão de injeção: 1815 bar Largura da coluna: 1500 x 1200 mm Espessura do molde min: 700 mm max: 1400 mm Curso de abertura: 1500 mm Núcleos: 4 Interface do robô: Sim Opções: Coluna retrátil

Hydraulic injection moulding machine manufactured in 2015. This Negri Bossi 1300H-400 features a screw diameter of 40 mm and a real injection volume of 232 cc. It offers a maximum clamping force of 1300 kN and a max opening stroke of 420 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi 1300H-400 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This Negri Bossi 5500H-4250 features a screw diameter of 90 mm and a real injection volume of 2,600 cc. It offers a maximum clamping force of 5,500 kN and a max opening stroke of 900 mm. If you are looking to get high-quality plastic injection moulding capabilities, consider the Negri Bossi 5500H-4250 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2013. This Negri Bossi 5500H-4250 features a screw diameter of 90 mm and a maximum clamping force of 5500 kN. It offers a real injection volume of 2600 cc and a maximum pressure on material of 1630 bar. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi 55000H-4250 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2013. This Battenfeld HM150750 features a clamping force of 1500 kN, providing robust performance for various applications. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld HM150750 machine we have for sale. Contact us for further details.

This HAITIAN MA-4700 injection moulding machine was manufactured in 2011. It offers an injection capacity of 1860 grams and a powerful injection pressure of 1850 Bar. The clamping force can reach up to 470 tons, accommodating molds with a thickness range of 320 mm to 820 mm. The distance between tie bars is 1560 mm, ensuring ample space for various mold sizes. Consider the opportunity to buy this HAITIAN MA-4700 injection moulding machine. Contact us for more information.

This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information.

This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.

Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.

This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details.

This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details.

This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information.

Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2010. This Krauss Maffei CX 80-180 features a clamping force of 80 T and a screw diameter of 40 mm. It has a shot volume of 201 cm³ and a shot weight of 183 g. The machine includes a Euromap 67 robot interface and six heating zones. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei CX 80-180 machine we have for sale. Contact us for further details.

Used injection molding machine HyPET 120 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-volume PET preform manufacturing and is well suited for integration into a used bottling line or as a second hand addition to industrial packaging operations. The 120-ton clamping platform is paired with a 32-cavity hot runner system, enabling consistent output of PET preforms across multiple bottle formats. Manufactured by Husky in 2009, the unit is configured for rapid mold changeovers and stable cycle times, supporting beverage production with precise neck finishes and preform weights.Manufacturer: HuskyModel: HyPET120 P85/95 E85Year of manufacture: 2009Clamping force: 120 tonsCavities: 32Hot runner system: Husky 32-cavity hot runner, common across supplied moldsNeck finishes: 29/25 mm primary; additional parts for 30/25 mmPreform weight ...

Máquina de Moldagem por Injeção Battenfeld Microsystem 50 100% a funcionar sem defeitos ocultos

Used NEGRI BOSSI 700T injection molding machine - Year 2009Technical Specifications & Performance DataThis Negri Bossi injection molding machine delivers high-output performance in the 700-ton clamping class, ideal for producing technical plastic parts and PET preforms that feed downstream used bottling line and industrial packaging operations. Built in 2009, it combines robust Italian engineering with a versatile injection unit and advanced controls for demanding, continuous-duty manufacturing environments common in beverage production supply chains.Manufacturer: Negri BossiModel: VECTOR 7000 H 6500Year: 2009Working hours: 69500Clamping class: 700-ton classScrew diameter: 110 mmShot volume: 4750 cm³Shot weight: 4320 gMaximum injection pressure: 1670 barCore pulling: 4 (2 + 2)Robot interface: YesAir circuits: 4Ejection stroke: 350 mmOpening stroke: 1000 mmMould height (min–max): 400� ...