mandriladoras, centros de usinagem usadas para venda (581)

Technical details Travel X: 600 mm Travel Y: 400 mm Travel Z: 600 mm Table size: 750 x 450 mm Control: HEIDENHAIN TNC 426 Main spindle speed: 10,000 rpm Magazine slots: 24 Auction-ID: A1-46872-41

CNC Machining Center KUNZMANN BA 1200 Year of Make: 2004 Technical details Travel X: 1,200 mm Travel Y: 700 mm Travel Z: 750 mm Maximum spindle speed: 8,000 rpm Machine Details Control: Heidenhain TNC530 Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 6.3 A Operating hours Spindle hours: 5,238 h Switch-on hours control: 17,705 h Auction-ID: A1-46872-49

CNC machining center WAGNER WMC 800 R Year of Make: 2008 Control: Siemens 810 D Technical data X-travel: 800 mm Y-travel: 500 mm Z-travel: 510 mm Table height: 830 mm Max. tool length: 250 mm Tool diameter: 80 mm Clamping area: 800 x 450 mm Number of tool positions in the magazine: 20 Speed range: 8,000 rpm Auction-ID: A1-46872-33

Heller MCH 280 C 5 axes Year of Make: 2006 Control: Siemens 840 D Technical data Spindle speed: 8,000 rpm Travels X: 1,000 mm Y: 1,200 mm Z: 1,100 mm Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Tool positions in the magazine: 400 Recording: HSK 100 Auction-ID: A1-46872-56

Technical details X-travel: 1,100 mm Y-travel: 510 mm Z-travel: 510 mm Rapid traverse: 18 / 18 / 15 m/min Control: Siemens 840 D SL Shop Mill Table surface: 1,200 x 600 mm Workpiece weight: 1,000 kg Spindle speeds - infinitely variable: 8,000 rpm Spindle holder: ISO 40 Tool Changers: 24 Cooling by the spindle: 20 bar Machine Details Machine weight: approx. 8 t Space requirement: approx. 3,000 x 2,350 mm Connected load: 400 V, 50/60 Hz Current: 50 A Facilities Shop Mill Preparation for 4th axis Auction-ID: A1-46872-51

5-axis CNC machining center Model: ÖKK VP 400 Year of Make: 2004 Control: FANUC Series 160is-MB Technical data Travels X-axis (slide: right/left): 600 mm Y-axis (table: forward/backward): 410 mm Z-axis (spindle: up/down): 460 mm A-axis (table tilt): -120° to +30° C-axis (table rotation): 360° Spacing Distance table surface to spindle nose: 70 – 530 mm Distance from the front of the column to the centre of the spindle: 620 mm Table Work surface: Ø 350 mm Max. workpiece weight on the table: 200 kg Height from floor to table surface: 1080 mm Spindle Speed range: 100 – 12,000 rpm Number of speed levels: infinitely variable Spindle holder: 7/24 taper, size No. 40 Spindle bearing inner diameter: Ø 65 mm Feed Rapid traverse: X and Y axis: 48 m/min Z-axis: 36 m/min A-axis: 22.2 rpm C-axis: 33.3 rpm Working Feed: X, Y and Z axis: 1 – 36,000 mm/min A-axis: 22.2 rpm C-axis: 33.3 ...

5-axis CNC machining center MIKRON XSM 600 U Year of Make: 2009 Control: Heidenhain iTNC 530 Technical data X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm B-axis: +30° / -110° C-axis: n x 360° Working spindle: 100 - 36,000 min-1 Tool holder: HSK E 50 Auction-ID: A1-46872-58

Machining Center - Universal Lid Maho DMU 60 T Year of Make: 2002 Number of axes: 5 (3+2) Technical data Travels X-axis: 630 mm Y-axis: 560 mm Z-axis: 560 mm Magazine slots: 24 Tool holder: SK 40 NC rotary table NC rotary table built into the rigid table. Clamping area: 600 x 1000 mm Diameter: 600 mm Table weight: 800 kg Number of T-slots: 8 / 1 T-slots width: 14 H12 / 14 H7 T-slot spacing: 63 mm Max. load of the table: 350 kg Rotatable C-axis: 360° 5-axle equipment Controlled NC swivel milling head (B-axis) Rotary table integrated in rigid table (C-axis) Auction-ID: A1-46872-48

OKUMA EURO CENTER V 50 Year of Make: 2002 Technical details Control: OSP-U100L Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 525 mm Table Load: 680 kg Clamping area: 1,200 x 510 mm Tool Changer Magazine slots: 20 Facilities Chip conveyor Auction-ID: A1-46872-50

Technical data Table size (2): 825 x 625 mm Number of pallets: 2 X-axis movement: 1,600 mm Y-axis movement: 600 mm Z-axis movement: 500 mm 4th axis (rotary table): NC Maximum table load: 1,200 kg Maximum spindle speed: 12,000 rpm Auction-ID: A1-46872-54

Model: Rover 24XL Serial Number: 32495 Working range X: 6170 mm Working range Y: 1380 mm Working range Z: 155 mm Main motor: 7.5 kW Max rotation speed: 24,000 rpm Tool change positions: 7 Vertical drill bits: 14 Horizontal drill bits X: 4 Horizontal drill bits Y: 2 Worktop: 10 bars, 4 trolleys per bar Suction cups: also included, in good condition, spare Plane positioning: automatic Vacuum pump: Busch MM1252 AV Chip conveyor belt Auction-ID: A7-46828-1

Technical details Serial number: 1000039423 Power: 21 kW Voltage: 400 VAC Full load current: 36 A Air supply: 6.5 bar Suction flow rate: 30 m/sec Dimensions: 5300 × 2300 × 2300 mm Weight: 2,500 kg Condition: Used (very few working hours) Additional notes: For further technical information, please refer to documents 1-01.pdf, 1-02.pdf and 1-03.pdf Auction-ID: A7-40554-1

Spindle speed: 18,000 rpm Tool magazine: 50 tools Tool holder: SK25 Working area (X × Y × Z): 400 × 250 × 350 mm Auction-ID: A7-46789-1

x-travel: 600 mmy-travel: 400 mmz-travel: 600 mmControl: Heidenhain type: 410 M mm: elktr. table surface area: 750x450 mmdistance spindle /table: 690 mmTable load: 500 kgspindle taper ISO: 40 Cooling through the spindle: barturning speeds: 9000 U/minspindle motor: 7,5 kWtotal power requirement: kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mGood conditionVery few operating hoursThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by  ...

x-travel: 600 mmy-travel: 500 mmz-travel: 400 mmcontrol: 432 spindle taper ISO: 40 turning speeds: 20-6000 U/minTool changer: 24 total power requirement: 35 kWweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,6x3x2,925 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine for drilling holes for locks, on door. 380 Volts Auction-ID: A7-46472-2

With 3 drilling heads and anuba insertion Auction-ID: A7-46472-1

bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 225 - 4300 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.2 pcs. Götzinger drilling and milling centers----------------------------------------For sale on behalf of a customer!2 identical machines:One machine for left parts and one for right parts.The machines can also be used individually.The machines were controlled via window manufacturing software, but can also be operated via the machine software.Both machines are equipped identically:- Left and right drilling units for front-end drilling.- 3 units for drilling and milling for longitudinal machining.- Parts are loaded once, and the unit carrier then moves for the various machining operations.Installation length per machine approx. 6 m.Individual sale possible:Price per machine 10,000 EuroSee the enclosed PDFs for more information.The data for this ad was created with ModulMWS - the software solution of Logo ...

Pitch: 32 mmWorking width: 896 mmBoring depth max.: 65 mmMotor output: 2x1,5 kWOverall size: 1122x1040x1250 mmWeight: 380 kgNumber of boring spindles: 29 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mmWorking width: 1088 mmBoring depth max.: 85 mmMotor output: 2x1,5 kWOverall size: 1320x1040x1250 mmWeight: kgNumber of boring spindles: St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mmWorking width: 704 mmBoring depth max.: 70 mmMotor output: 1,5 kWWeight: 310 kgNumber of boring spindles: 23 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 100 - 1.800 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthreading: bis M 30 throat: 330 mmbore stroke: 180 mm: 4 speeds: 60 - 765 U/mintable-size: 720 x 360 mmtotal power requirement: 2,6 / 3,2 kWweight: 350 kgdimensions: 720 x 1100 x 2050 mmEquipment:- automatic feed- infinitely variable speed- thread cutting device- adjustable drilling depth stop- coolant device- spindle protection- drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 540 mmy-travel: 635 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: 10,2 tdimensions of the machine ca.: 2,9 x 2,9 x 3,1 mRöders RXP 601 DSH – 5-Axis High-Precision Milling and Grinding CenterGeneral Machine DataManufacturer: Röders TEC GmbH (Germany)Machine Type: 5-Axis CNC Milling and Grinding CenterModel: RXP 601 DSHDesign: Vertical High-Speed MachineAxis System: X / Y / Z + A / CDrive System: Direct drives in all linear and rotary axesMeasuring Systems: Optical direct measuring systems in all axesThermal Management: Active temperature stabilization of all main componentsWorkspace & MechanicsX-axis travel: 540 mmY-axis travel: 635 mmZ-axis travel: 400 mmA-axis swivel range: ±115°C-axis continuous rotation (360°)Max. workpiece weight: up to 200 kgMachine weight: approx. 10,200 kgSpace requirement (L×W×H): approx. 2,950 × 2,950 × 3,100 mmSpi ...

x-travel: 1300 mmy-travel: 720 mmz-travel: 630 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain iTNC530NC-rotary tableNC-swivel head28-fold automatic tool changerelectronical hand wheelchip conveyorcoolant through spindle Technische Daten / technical details:Verfahrweg X / X-Travel 1300 mmVerfahrweg Y / Y-Travel 720 mmVerfahrweg Z / Z-Travel 630 mmTischgröße / table size 1000x800 mmWerkzeugschaft / spindle taper HSK63 Drehzahl / spindle speed 12000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 28 Gewicht der Maschine ca. / weight ca. 8500 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of  ...

bore capacity in steel (diameter): 6 mmtotal power requirement: 1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3300x2100x2100 mmWeight: 1500 kgTotal power requirement: 14 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.