máquinas injetoras usadas para venda (796)

Especificações Máquina de moldagem por injeção Demag IntElect 100/420-410 (totalmente elétrica) Dados gerais Força de aperto: 100 t (1000 kN) Ano de Fabricação: 2007 Controlo: NC4 / MC4 Unidade de injeção: 410 Diâmetro do parafuso: 40 mm Unidade de fixação Espaçamento da distância livre: 420 x 420 mm Peso da máquina: aprox. 5.000 kg Equipamento: 2 x puxão hidráulico do núcleo Localização: Aachen, Alemanha

Especificação Máquina de Moldagem por Injeção Demag Ergotech 100/420-600 conceito Dados gerais Força de aperto: 1.000 kN (100 t) Ano de Fabricação: 2000 Controlo: Demag NC4 / ergocontrol Unidade de fixação Espaçamento do guiador (H x V): 420 x 420 mm Altura mínima de instalação da ferramenta: 250 mm Curso inicial: 750 mm Força de ejeção: 41 kN Unidade de injeção Diâmetro do parafuso: 35 mm Unidade de injeção: 600 Localização: Aachen, Alemanha

Key data: 800 kN, 100 g/PS, 35 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: ENGEL Tipo: VICTORY 330/80 TECH Ano de Fabricação: 2012 Força de fixação: 80 toneladas Espaçamento dos sparrings: SPARLESS DN dos parafusos: 35 mm Deslocamento máximo: 110 ccm³ Peso da peça moldada: 100 g/hp Controlo: CC200 Equipamento: -Robô, fabricante: SEPRO, tipo: AXESS -2 x Core Pulls -Válvula de escape -Correia transportadora -Vedação de segurança

A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.

The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.

Máquina de moldagem por injeção Ferromatik Elektra 50-300 seleção BJ 2008 Máquina de Moldagem por Injeção Ferromatik Basetec 85-493-520 BJ 2009 Máquina de moldagem por injeção Ferromatik Elektra 1100-450 evol. Ano de fabrico 2006 Máquina de moldagem por injeção Ferromatik K 110s-2F BJ 1999 Máquina de moldagem por injeção Ferromatik K 125s/2F BJ 1995 Máquina de moldagem por injeção Ferromatik K 200s-2F -493 BJ 1999 Anjo Príamo Locativo de Bito Leo Regulador de canal quente Gammaflux G 24 Esteiras transportadoras Unidades de controlo de temperatura Acessórios Walther Acoplamentos

A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating h ...

This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2023. This TEDERIC NEO.E55/e110h features a 12 color TFT touchscreen control unit and a stainless steel material hopper. It includes a 3-stage central ejector and a pneumatic core pull control. With a screw diameter of 25 mm and a bimetallic barrel, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the TEDERIC NEO.E55/e110h machine we have for sale. Contact us for further details.

Máquina de moldagem por injeção Demag 1000 a BJ 2019

Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible.

Engel 3 ES 7050 / 1 500 Duo construído em 1999 contra licitação.

Key data: 4200 kN, 527 g/PS, 70 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: KRAUSS MAFFEI Tipo: KM420-1900C2 Ano de fabricação: 2006 Força de fixação: 420 toneladas Espaçamento das longarinas 800 x 800 mm Parafusos DN: 70 mm Deslocamento máximo: 1.047 cm³ Peso da peça moldada: 853 g/hp Controlo: MC5 Equipamento: Comboio de núcleo de 2 PCS Robô SEPRO, tipo: SR4030 S3 VISUAL Controlo de canal de zona quente a 12 vias Unidade de controlo de temperatura de interface

A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details.

This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details.

Key data: 500 kN

Força de fixação: 500 kN Placa de fixação: 540 x 540 mm Curso de abertura da ferramenta: 350 mm Altura mínima de instalação da ferramenta: 200 mm Largura de abertura: 500 mm Curso do ejetor: 100 mm Peso total: aprox. 2.300kg

2 x máquinas de moldagem por injeção Engel VC 2460/180 tech BJ 2023

Key data: 250 mm, 21 , 18

Diâmetro do parafuso: 18 ou 25 mmCurso de curso: 23 / 44 cm³ Peso de injeção em poliestireno: 21 / 40 g/hpPressão de injeção: 2.500 / 1.550 barForça de fixação: 25 t270 x 270 mmAltura mínima de instalação da ferramenta: 200 mmDistância de abertura: 300 mmCONTROLO: SelogicaTexto do ecrã: alemão / inglês Manual de instruções: alemão / alemão Euromap 67 Potência da bomba: 7,5 kWPeso total: 2.500 kgDimensões L x L x H: 3,0 x 1,3 x 1,9 m Condições de pagamento: 100 % antes de assumir a máquina, apenas líquido

Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible.

Máquina de moldagem por injeção Haitian Zerres ZE600 construída em 2019 e a correia transportadora MB Conveyors desde 2015.

Ref. no.: 18625Manufacturer: WITTMANN BATTENFELDYear of construction: 2011Clamping unitClamping force: 110 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 450 mmPlaten size (h x v): 680 x 663 mmInjection unitScrew diameter: 30 mmInjection volume: 88 cm³Shot weight: 80 gInjection pressure: 1471 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 4600 kgFurther information:Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.Compared to conventio ...

Ref. no.: 18635Manufacturer: SEPROYear of construction: 2022Further information:The SEPRO S5-25 med is a powerful 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines.The robot is in very good technical and cosmetic condition and comes from a clean production environment. The med” version is specifically designed for medical manufacturing and cleanroom applications.The robot was used exclusively for testing and training purposes and therefore has very low operating hours.The robot is additionally fitted with a Zimmer Group pneumatic rotation module and a Gimatic QCY90-A Quick Tool Changer system.The Zimmer module allows components to be rotated between defined positions, while the Gimatic system enables quick changing of grippers or vacuum tooling. These additional features increase the flexibility of the robot for a wid ...

Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible.

Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed p ...

Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous  ...

Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible.

Key data: 1300 kN, 127 g/PS, 35 mm

1.0 St. Gebr. Máquina de moldagem por injeção de dois componentes com robô Fabricante: ARBURG Tipo: 420C1300-350-60 Ano de Fabricação: 2003 Força de fixação: 130 toneladas Espaçamento dos longarinos 420 x 420 mm Parafusos DN 1: 35 mm Peso da peça moldada em hp: 127 g Parafuso DN 2: 25 mm Peso da peça moldada em cv: 45 g Controlo: Selogica Equipamento: . Comboio central -Robôs

Máquina de Fundição de Pontuação Arburg 470C 1500-400 BJ 2006 Máquina de moldagem por injeção Arburg 370H 600-290 BJ 2010