outras máquinas de construção usadas para venda (1,058)

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

2019 Aerzen D52S Rotary piston compressor Find more here - / Contact us at -

Plastic Poles SDS-01011 Floating Platform with Plastic Poles 600m2 Find more here - / Contact us at -

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -

Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -

Pneumatic hammer C230G010

BIG adapter Manitou to Euro, - Self-weight: approx. 170 kg, Dimensions:, Bolt top: Ø 80 mm, Bolt bottom: Ø 36 mm, Bolt spacing (center to center): 350 mm

Mustang HM150 hydraulic hammer, Technical specifications:, - Weight class: 1.5 to 4.5 tons, - Self weight: 145 kg, - Oil flow: 20 to 35 l/min, - Operating pressure: max. 140 bar, - Impact frequency: 600 to 1150 strokes/min, - Year of construction: 2025, - incl. a chisel (flat)

Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper

NEW - year of construction 2022, with Lehnhoff MS01 mount, incl. 1 chisel, 105 kg own weight, suitable for 1 - 2.5 t excavators

Year of construction 1993, unused, stainless steel double-shaft mixer, Trough length: 7650 mm, Total length: 9100 mm, 17.3 kW engine with transmission, 3900 kg dead weight

NEW, Year of manufacture 2024, Suitable for 7-14t excavators

NEW !, 2024 Mustang GRP1000 Demolition & Sorting Grapple, 990 kg, Suitable for 13-19 t excavators, Required dredging power: 300bar, Oil flow rate of the excavator: 50 l/min, Grapple capacity: 70 bar, Oil flow rate of the grapple: 30 l/min, Many more grapples available!

4.80 m lifting height, 8000 kg lifting capacity, length: 3,840 mm, width: 1,800 mm, height: 2,550 mm, free lift: 1,400 mm, load capacity: 8 t at 600 mm LSP, with tine shifting and tine height adjustment

Screwing plate / hammer plate / demolition grapple plate / sorting grapple plate suitable for Hammer and Mustang GRP250 and GR25

Mustang GRP1500 demolition & sorting grapple, Technical specifications:, - Year of construction: 2025, - Dead weight: 1250 kg, - Suitable for 17-23 t excavators, - required excavator power: 300 bar, - Excavator oil flow rate: 75L/min, - Gripper capacity: 70 bar, - Gripper oil flow rate: 30L/min, Many more grippers available!

Warneke aluminum tipping body, two axles with steering axle, - Year of construction: 1990, - Support load: 10 t, - Wheelbase: 220cm, - Dead weight: 10.6 t, - Maximum permissible total weight: 30 t

Häner hydraulic hammer HX 600SA, Technical specifications:, Construction year: 2025, Oil/min: 20-35 l/min, mass: 120kg, Operating pressure/bar: 88-117 bar

Sullair 31013 Jackhammer

Demag P10 Pneumatic Hammer

Loxam 02153436 jackhammer

Pneumatic Hammer Mac3 C325F029

Sollair 02200767 jackhammer

for 7 - 16 t dead weight, 700 kg dead weight, 45 l / min oil flow, 360° rotation, various mounting plates & hoses available on request

for 5 - 12 t excavator, 480 kg net weight, 25 l/min excavator oil flow capacity, 360° rotation,

NEW, 1640 kg net weight, suitable for 22 - 31 t excavators, oil flow for excavators 90 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

Acoplamento rápido, armação de montagem, conecta circuitos hidráulicos ao mudar de ferramentas da cabina do condutor, no mais curto espaço de tempo possível, ao premir um botão

Pelessierpresse Hanau, para pressionar rodas de vagão no eixo, fotos gemaess

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 97 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c4-4-w23-46131 70-new/42380, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 615 kg, Type number: C4.4 W23-4613170

Engine Brand: VOLVO PENTA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 185 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-penta-tad881ve-new/4 5888, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.030 kg, Type number: TAD881VE