outras máquinas e instalações usadas para venda (22,912)

Grundfos CH8-30 – Horizontal Centrifugal Pump 8 m³/h GeneralDescriptionCompact and robust single-stage horizontal centrifugal pump designed for the transfer of clean liquids. Reliable model from the Grundfos industrial range, suitable for fixed installations in agricultural, winemaking or industrial environments. Manufacturer identificationBrand: GrundfosType: CH8-30 A-A-AUUEModel: B 4NZ58415Manufacture: EnglandFrequency: 50 HzHydrolic characteristicsNominal flow rate (Q): 8 m³/hNominal H: 21 mCEMax H: 30 mCEPermissible pressure: up to 10 barFluid temperature: up to 90 °CElectrical characteristicsPower supply: Three-phaseVoltage: 3 × 220–240 V / 380–415 VPower consumption (P1 max): 1,120 WCurrent: 3.4 / 2.0 AProtection class: IP54Insulation class: FConstructionCast iron pump bodyImpeller and internal components suitable for clean liquidsStandard mechanical sealThreaded connecti ...

Set of 4 DN 125 diaphragm valves for harvesting – AKOSet of 4 identical valves (description and photos valid for each valve). This AKO DN 125 diaphragm valve is designed for the passage of the harvest in a wine-growing environment. Its configuration, combined with pneumatic control and a design adapted to the loaded products, makes it a robust and immediately usable second-hand solution to complete a harvest reception or transfer line. Technical dataBrand: AKOType: diaphragm valveNominal passage: DN 125Pneumatically operatedAir supply pressure: 2 to 8 barProduct/supply pressure: 1.5 to 2 barOperating temperature: -10 °C to +80 °CYear of manufacture: 2012DimensionsTotal length: 420 mmTotal diameter: 280 mmLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-222

120 hL – Ruralinox – 304 stainless steel tank conical bottom on legsThis RURALINOX stainless steel storage tank with a capacity of 120 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a conical bottom on legs, a closed conical roof and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical tank closed on legsBrand: RURALINOXCapacity: 12.000 litresMaterial: stainless steelRoofConical roof1 chimney chimney DN 500 mm with stainless steel hatch and 1 chimney tap LiftingringsFerrule1 door bar1 rectangular door 530 x 420 mm external opening1 tap and level strip1 taster tap1 stainless steel partial drain valve on square flange with DN 40 Mâcon valveBottomConical bottom ...

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed airTechnical dataType: P-EG 0768Max. working pressure: 10 barTest pressure: 18.3 barMaterial: stainless steel 304 (1.4301)Operating temperature (gas, air): -25/+150 °CVolume: 77 litresAcc. classification to 2014/68/EU for fluids group 2Flange connection: DN150The P-EG filter housings have been developed for the purification of compressed air, technical gases and steamDimensions & weightHeight: 1410 mmWidth: 480 mmWeight: 70 kgLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-283

Manufacturer: BURKHARDT + WEBER GmbH Model (Typ): MC 100 S0 Machine Type: CNC Horizontal Machining / Boring Center (floor-type) Country: Germany Delivery Date: July 1992 Series: MC Series (Modular Machining Centers) Travels X (Column travel): ~3,000 – 5,000 mm Y (Vertical): ~2,000 – 2,500 mm Z (Ram): ~800 – 1,200 mm W (Spindle quill): ~500 – 800 mm Spindle Diameter: 100 mm (this is what MC 100” refers to) Spindle Taper: ISO 50 / SK50 Spindle Speed: ~2,000 – 3,000 rpm Main Motor Power: ~30 – 50 kW Auction-ID: A1-51153-37

201 hL – Stai – 304 stainless steel tank with conical base on legs201 hL STAI stainless steel tank, designed for storage in cellars or in agri-food environments, at atmospheric pressure. This tank offers simple and reliable operation, with good accessibility for routine operations. Technical characteristicsType: Vertical cylindrical tankBrand: STAIMaterial: Stainless steel 304Capacity: 20,100 litersLast use: Edible oil storage (Tip before use: Clean the tank to remove edible oil residues)Roof1 eccentric chimney with hatchFerrule1 support bar 1autoclave door at the top of the ferrule1 rectangular door (external opening)1 taster valve1 partial drain valveConical bottom1 total drain valve5 feet stainless steelDimensionsDiameter: 2500 mmTotal height: 4800 mmLocation: CivrayEquipment sold loaded on truck: mandatory additional dismantling and loading fees apply to this lot. Auction-ID: A1- ...

220 hL – 1993 Stai – 316 stainless steel tank on legsThis STAI 316 stainless steel storage tank with a capacity of 220 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on closed legs, combined with a flat bottom and simple racking and control equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical dataCylindrical vertical on closed legsBrand: STAIYear: 1993Total capacity: 22,000 litresMaterial: stainless steel 316Roof1 chimney centredLifting ringsFerrule1 rectangular door external opening 530 × 420 mm1 level valve and ruler1 partial drain valve with ball valve DN 70 MÂCON1 taster tapFlat bottom1 total ball drain valve DN 70 MÂCON4 feet height 500 mmDimensionsDiameter: 3000 mmHeight: 4300 mmLocation: Monteux (84)Equipment sold loaded o ...

140 hL – Chalvignac – 304 stainless steel tank with conical bottom on legs140 hL vertical stainless steel tank, designed for the storage, vinification and processing of liquid foodstuffs. Its conical bottom on 5 adjustable legs facilitates racking, total emptying and cleaning. Technical characteristicsBrand: ChalvignacTotal capacity: 14,000 litresMaterial: 304 stainless steelConfiguration: vertical cylindrical tank on legsRoof1 chimney1 ladder support barFerrule1 winding tube1 thermometer1 taster tap1 tap and level ruler1 partial drain valve on square flange1 rectangular door with external opening1 total drain valve on square flangeBottomConical bottom5 adjustable feetDimensionsDiameter: 2,200 mmEquipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. Auction-ID: A1-51122-367

258 hL – Cartier – 304 stainless steel tank closed self-emptying on sloping bottom skirtThis 304 stainless steel storage tank with a capacity of 258 hl is designed for the storage of liquids in the wine and agri-food environment. Its cylindrical configuration closed on a self-emptying skirt, combined with a sloping bottom, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical dataCylindrical on self-emptying skirtCapacity: 25,800 litresMaterial: stainless steelTank number: 11, 12 and 13Closed roofwith chimney and hatch Ø 550 mm2 lifting ringsFerrule1 taster valve1 rectangular door 430×540 mm at the bottom of the ferrule1 partial drain valve DIN 50 with plug1 winding tubeBottomSloped bottom on skirt1 total drain valve DIN 504 feet under the skirtDimensionsDiameter: 3000 mmTotal height: 5500 mmLocation: Mont ...

250 hL – Fiberglass Insulated Tank on SkirtThis insulated fiberglass tank with a capacity of 250 hL is designed for the storage of liquids in industrial environments. Its configuration, combined with a closed vertical cylindrical tank, a flat bottom on a skirt and simple withdrawal and control equipment, makes it a robust and immediately usable second-hand solution to complement an existing storage capacity. Technical characteristicsVertical cylindrical tankMaterial: fibreglassTotal capacity: 25,000 litresRoofCentral chimneyShell Thermometer1 taster valve2 partial drain valves on flange 120×120 mm1 total drain valve on flange 120×120 mm1 rectangular door1 tank with a level support strip2 tanks without a level support stripFlat bottomon skirtDimensionsDiameter: 2600 mmHeight: 6500 mmLocation: Sigean (11)Equipment sold loaded on truck: additional mandatory dismantling and loading fees  ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating capNew material. Technical characteristicsModel: SPAIPSER5000Material: 304 stainless steelTotal capacity: 4,880 litresBottom: sloping flat, slope 4%Roof: floating capInterior finish: bright annealingExterior finish: brushedRoof2 vacuum lifting rings1 floating cap 316L stainless steel with complete pneumatic systemValve. Ferrule1 jib crane1 lifting winch1 ladder support1 rectangular door 420×530 mm at the bottom of the ferrule with external opening1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper1 tasting tap on DIN 15 tap1 needle thermometer1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube)4 coil towers with 2.15 m² exchange surface on the ferrule2 coil towers with 0.75 m² exchange surface arou ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2%ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristicsFlat bottom tank inclined 2%Brand: ALFA LAVALTotal capacity: 30,200 litresMaterial: stainless steel 316 LInterior finish: Cold rolled rawExterior finish: Cold rolled rawThermoregulatedConical roof1 eccentric chimney at the front Ø 200 mm2 Stainless steel flags1 thermometer6 lifting ringsFerrule1 oval door 310×420 mm1 partial drain valve DN 651 tap for level probeFlat bottominclined 2% with housing1 total drain valve with plugDimensionsDiameter: 2800 mmTotal height: 6000 mmFerrule height: 4800 mmConical upper dome: 5 ...

138 hL – ETA – Temperature-controlled 304 stainless steel tank with a sloping flat bottom on a stainless steel baseThis 304L stainless steel temperature-controlled storage tank with a capacity of 138 hl is designed for the storage of liquids in the wine and food industry. Its configuration, combined with a sloping flat bottom on a stainless steel base, a brushed exterior finish and its thermoregulation system by internal coil radiator, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristicsBrand: ETAMaterial: 304L stainless steel Total capacity: 13,800 litresTemperature-controlled tankInterior finish: raw rolled, stripped and passivatedExterior finish: brushed, stripped and passivatedRoofDrain socket with plug1 chimney chimneychimney Shell1 ladder support bar1 tap taster1 partial ball ...

103 hL – Temperature-controlled 304 stainless steel tank on legsThis temperature-controlled 304L stainless steel storage tank with a capacity of 109 hl is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a flat bottom on legs, a brushed exterior finish and its coil radiator thermoregulation system, makes it a robust second-hand solution that can be immediately used to complete a winery or increase an existing storage capacity. Technical characteristicsMaterial: 304L stainless steelTotal capacity: 10,300 litresThermoregulatedInterior finish: raw rolled, pickled and passivatedExterior finish: brushed, pickled and passivatedRoofDrain socket with plug1 chimneychimney Ferrule1 taster tap1 partial ball drain valve DN 50 MÂCON on square flange1 total ball drain valve DN 50 MÂCON on square flange1 rectangular door 410 x 530 mm with e ...

520 hL – Hermex – Fiberglass tank with domed bottomThis HERMEX fiberglass tank with a capacity of 520 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a closed vertical cylindrical tank, a domed bottom and simple racking and control equipment, makes it a robust and immediately usable second-hand solution to supplement an existing storage capacity. Technical dataVertical cylindrical tankBrand: HERMEXMaterial: fiberglassTotal capacity: 52,000 litersRoofCentral chimneyShell1 ladder support bar1 taster tap1 round autoclave door1 partial drain valve on square flange 120×120 mm1 strip and levelBottomDomed on skirt1 total drain valve on square flange 120×120 mmDimensionsDiameter: 3300 mmHeight: 8200 mmLocation: Sigean (11)Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. Auc ...

283 hL – Cividac – 304 stainless steel tank with conical bottom on legsUsed 304 stainless steel tank with a capacity of 283 HL, designed for the storage of wines, musts, juices or other liquid food in the wine and food sectors. Thanks to its conical bottom and its two racking circuits, this tank ensures partial emptying as well as total emptying in good conditions. Its oval autoclave door facilitates interior access for cleaning, control and maintenance operations. Technical characteristicsType: vertical storage tankCapacity: 28,300 litersMaterial: stainless steel 304Configuration: vertical cylindrical tankRoofDefect reported: minor deformation of the dome (visible in the photos), without impact on the structure or use of the tank. 1 chimney chimney with stainless steel hatch1 valve positioned on the chimney2 lifting ringsferrolePeripheral reinforcement rings1 oval autoclave door1 ta ...

220 hL – ETA – Temperature-controlled 304 stainless steel tankThis ETA temperature-controlled storage tank in 304 stainless steel with a capacity of 220 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration, combined with a flat bottom and a coil radiator, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical tankBrand: ETATotal capacity: 22,000 litersMaterial: stainless steel 304Thermoregulated: serpentine flagRoof1 off-center chimney at the rear1000 mm high railingFerrule1 ladder support bar1 full level tube1 taster tap1 rectangular door1 partial drain valve with PVC plug1 total drain valve with PVC plug1 coil radiatorFlat bottomDimensionsDiameter: 3000 mmHeight: 3400 mmLocation: Monteux (84)Equipment sold ...

530 hL – 1994 Hermex – Flat-bottom fibreglass tankUsed Hermex fibre tank, with a capacity of 530 HL, designed for the storage of liquids in the wine, agriculture or agri-food sectors. Thanks to its vertical construction, flat bottom and large capacity, this tank optimises storage while limiting the footprint on the ground. It is equipped with an oval autoclave door facilitating access to the inside of the tank for inspection, cleaning and maintenance operations. Its chimney with stainless steel hatch, its taster tap, its winding tube and its total drain tap on flange make it a functional and immediately usable solution to complete a storage installation. Technical characteristicsType: vertical storage tankBrand: HermexYear: 1994Capacity: 53,000 litersMaterial: fiberConfiguration: vertical cylindrical tankRoof1 chimney chimney with stainless steel hatchFerrule1 oval autoclave door1 ta ...

200 hL – Selip – Fiberglass tank with curved bottom on legsSELIP brand fiberglass storage tank, capacity 200 hl, closed cylindrical type. Designed for storage in the wine and agri-food environment, it combines a large capacity, easy access (chimney + oval door) and stainless steel pumping/emptying devices for simple and efficient operation in the cellar. Technical characteristicsClosed cylindrical tankBrand: SELIPTotal capacity: 20,000 litresMaterial: fibreglassRoof1 offset front din DN inside 390 mm and DN outside 580 mmFerrule1 stainless steel taster tap1 full level1 oval door 460 X 340 mm1 partial drain valve, reed, DN 70, stainless steel on square flange 100 X 100 mmDomed bottom1 total drain valve, with flap, DN 70, stainless steel on square flange 100 X 100 mm4 feet of 500 mmDimensionsDiameter: 2200 mmHeight of the ferrule: 5800 mmTotal height: 6800 mmLocation: Monteux (84)Equi ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating capNew material. Technical characteristicsModel: SPAIPSER5000Material: 304 stainless steelTotal capacity: 4,880 litresBottom: sloping flat, slope 4%Roof: floating capInterior finish: bright annealingExterior finish: brushedRoof2 vacuum lifting rings1 floating cap 316L stainless steel with complete pneumatic systemValve. Ferrule1 jib crane1 lifting winch1 ladder support1 rectangular door 420×530 mm at the bottom of the ferrule with external opening1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper1 tasting tap on DIN 15 tap1 needle thermometer1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube)4 coil towers with 2.15 m² exchange surface on the ferrule2 coil towers with 0.75 m² exchange surface arou ...

220 hL – ETA – Temperature-controlled 304 stainless steel tankThis ETA temperature-controlled storage tank in 304 stainless steel with a capacity of 220 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration, combined with a flat bottom and a coil radiator, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical tankBrand: ETATotal capacity: 22,000 litersMaterial: stainless steel 304Thermoregulated: serpentine flagRoof1 off-center chimney at the rear1000 mm high railingFerrule1 ladder support bar1 full level tube1 taster tap1 rectangular door1 partial drain valve with PVC plug1 total drain valve with PVC plug1 coil radiatorFlat bottomDimensionsDiameter: 3000 mmHeight: 3400 mmLocation: Monteux (84)Equipment sold ...

245 hL – Pierre Guerin – Temperature-controlled 304 stainless steel tank with sloping bottomThis PIERRE GUERIN 304L stainless steel storage tank with a capacity of 245 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat floor on legs, a central chimney and shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristicsBrand: PIERRE GUERINMaterial: 304L stainless steel Total capacity: 24,500 litersThermoregulatedInterior finish: cold rolled rawExterior finish: brushedRoofLifting rings1 central chimney with PVC DN 500 hatch with clamping studs1 tap for temperature probe1 50 Mâcon tap on chimney, internally / externally threadedFerrule walkway support1 stainless steel door 410 x 530 with exter ...

150 hL – 304 stainless steel flat bottom tank with casingThis 150 hL 304 stainless steel storage tank is designed for winemaking and liquid storage applications in the cellar. Its simple and robust design, combined with a roof with a chimney centred, a rectangular door with external opening, a flat bottom with a boilard and suitable racking equipment, makes it a reliable and immediately usable solution to complement an existing winery capacity. Technical characteristicsMaterial: 304 stainless steel Total capacity: 15,000 litresRoof2 lifting rings1 chimney centred with hatchFerrule1 ladder support bar1 door rung1 rectangular door with external opening1 taster tap Flat bottomwith boilard1 stainless steel total drain valve on square flange1 sludge without capDimensionsDiameter: 2800 mmHeight: 4000 mmLocation: CivrayEquipment sold loaded on truck: additional mandatory dismantling and loadi ...

258 hL – Cartier – 304 stainless steel tank closed self-emptying on sloping bottom skirtThis 304 stainless steel storage tank with a capacity of 258 hl is designed for the storage of liquids in the wine and agri-food environment. Its cylindrical configuration closed on a self-emptying skirt, combined with a sloping bottom, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical dataCylindrical on self-emptying skirtCapacity: 25,800 litresMaterial: stainless steelTank number: 11, 12 and 13Closed roofwith chimney and hatch Ø 550 mm2 lifting ringsFerrule1 taster valve1 rectangular door 430×540 mm at the bottom of the ferrule1 partial drain valve DIN 50 with plug1 winding tubeBottomSloped bottom on skirt1 total drain valve DIN 504 feet under the skirtDimensionsDiameter: 3000 mmTotal height: 5500 mmLocation: Mont ...

15,20 hL – NEW – Stainless steel 304 cylindrical-conical fermenter tank closed on feetNew equipment. Technical dataEffective capacity: 1520 litresCylindrical-conical bottomTop hatch with quick release diameter 400 mmStainless steel safety valve in DIN 50Winding column with removable washing ball and butterfly valve 2\" Tri-ClampLadder support Coolingjacket H. 900 mmMaximum pressure on honeycomb belt: 3 barThermometerStainless steel taster DIN 15Clear draught on the cone with stainless steel butterfly valve 2\" Tri-Clamp coupling4 adjustable feet with reinforcement barsTotal drain with 90° elbow + stainless steel butterfly valve 2\" Tri-Clamp connectionSocket for PT 100 probe2 lifting ringsExterior finish: brushedInterior finish: BA polished weld pickled passivatedDimensionsTotal height: 2850 mmDiameter: 1084 mmThickness: 20/10thLocation: Monteux (84)Equipment sold loaded on truck:  ...

444 hL (122 + 322 hL) – Tec Inox – Stainless steel 304 compartmentalized tank with flat bottom 2% on a slabVertical storage tank in TEC INOX stainless steel of 444 hL, divided into 2 independent compartments (122 hL and 322 hL). Previously used for wine storage, it allows several separate batches to be managed within the same tank. Technical characteristicsBrand: TEC INOXTotal capacity: 444 hL (122 + 322 hL)Construction: 304 food-grade stainless steelType: compartmentalized vertical storage tankFlat bottom with 2% slopeLayout: on concrete raftPrevious use: wineEquipment per compartment1 oval door stainless steel autoclave 310 × 420 mm1 level indicator1 total emptying1 partial emptying1 stainless steel chimney Ø 200 mmDimensionsTotal height: 6,000 mmLocation: Bollène (84)Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. Auction-ID: ...

200 hL – 304 stainless steel tank with conical bottom on legs200 hL vertical cylindrical stainless steel tank, designed for storage in cellars or in food processing environments. Its free-standing design and its corked exterior finish make it a robust and easy-to-use tank, suitable for use at atmospheric pressure. Technical characteristicsType: Vertical cylindrical tankMaterial: Stainless steelCapacity: 20,000 litersExterior finish: CorkedLast use: Storing edible oil (Advice before use: Clean the tank to remove edible oil residues)Roof1 chimneyFerrule1 rectangular door (external opening)1 taster valve1 partial drain valve on square flangeConical bottom1 total drain valve1 5-foot sludgeDimensionsDiameter: 2500 mmTotal height: 4800 mmLocation: CivrayEquipment sold loaded on truck: mandatory additional dismantling and loading fees apply to this lot. Auction-ID: A1-51122-334

Set of 10 pneumatic cylinder knife gate valves – AKOSet of 10 identical valves (description and photos valid for each valve). This AKO pneumatic cylinder knife gate valve is designed for flow opening and closing operations in industrial and food environments. Its configuration, combined with pneumatic control, a flanged body and position control equipment visible in the photos, makes it a robust and immediately usable second-hand solution to complete a transfer or process line. Technical dataBrand: AKOType: knife gate valveControl: pneumatic cylinderFlanged valve bodyCondition: usedEquipment1 pneumatic cylinder1 solenoid valve Metal Work Pneumaticcoil 24 V DC – 5 WReference: SOV 35 SOS 001 detector / mechanical limit switchDetector reference: ZCK-M1Location: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-217

Set of 5 DN 125 diaphragm valves for harvesting – AKOSet of 5 identical valves (description and photos valid for each valve). This AKO DN 125 diaphragm valve is designed for the passage of the harvest in a wine-growing environment. Its configuration, combined with a pneumatic control and a design adapted to the loaded products, makes it a robust and immediately usable second-hand solution to complete a harvest reception or transfer line. Technical dataBrand: AKOType: diaphragm valveNominal passage: DN 125Pneumatically operatedAir supply pressure: 2 to 8 barProduct/supply pressure: 1.5 to 2 barOperating temperature: -10 °C to +80 °CYear of manufacture: 2012DimensionsTotal length: 420 mmTotal diameter: 280 mmLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-223

120 hL – Dabrigeon – 304 stainless steel flat bottom tank with casingThis DABRIGEON stainless steel storage tank with a capacity of 120 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a vertical cylindrical tank with a flat bottom, a casing with a total drain valve and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical dataBrand: DABRIGEONMaterial: stainless steelTotal capacity: 12,000 litresVertical cylindrical storage tank with flat bottomRoof1 chimney chimney DN 500 mm2 lifting ringsFerrule1 ladder support bar1 partial drain valve1 taster tap1 rectangular door in the middle of the ferruleBottomFlat bottom with Boitard1 total drain valveTank on concrete baseDimensionsDiameter: 2400 mmHeight: ...