outras máquinas e instalações usadas para venda (22,912)

Auction-ID: A1-50699-30

Auction-ID: A1-50699-53

Rectangular steel clamping frame with manually operated screw clamps and support legs. Auction-ID: A1-50699-18

Veneer splicing machine using hot-melt glue thread. Equipped with a metal worktable, feed rollers, thread guides, control panel and pneumatic pressure regulator with gauge. Visible dust accumulation, paint wear and surface corrosion. Operating condition not verified. Auction-ID: A1-50699-13

Single-sided edge banding machine. Year of manufacture: 2011. Electrical supply: 400 V, three-phase, 50 Hz. Rated power: 7.8 kW. Rated current: 18.9 A. Weight: 850 kg. Equipped with chain feed conveyor, upper pressure beam, edge band coil support table, panel support rail, trimming units and extraction hoses. Opening protective hood, digital control panel, manual height adjustment crank and emergency stop buttons. Auction-ID: A1-50699-39

Veneer splicing machine using hot-melt glue thread. Equipped with metal worktable, feed rollers, thread spool enclosure, thread guides and control panel with ammeter and adjustment dial. Nameplate specifications: - Voltage: 400 V - Phases: 3 - Frequency: 50 Hz - Rated current: 2.2 A Auction-ID: A1-50699-14

Auction-ID: A1-50699-54

Auction-ID: A1-50699-52

- Pumping system not included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-36

- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4

- Total installed power 120 KW. - Drum diameter 3600 mm. - Maximum sand/metal capacity 110 t/h. - Rotation speed 2.30 rpm. - Water consumption 120 litres/min. - Includes: - GENERAL KINEMATICS SYNCROCOIL vibratory conveyor. - 2 outbound conveyor belts. - Hammer breaker unit equipped with 4 hydraulic grapples. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-5

- Vertical partition core blower. - Total installed power 21 KW. - Blowing capacity 16 litres. - Air tank capacity 200 litres. - Includes transfer table and 2 unloading and palletizing robots. - HINE 13-11619 hydraulic unit. - LÜBER LW-FDA-1640 gasification unit. - The screens of the 2 control panels are missing. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-14

- This equipment was part of the production line associated with the GOJAIN EQUIPMENT - 2005 foundry sand plant, available separately under batch number A7-50548-1. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-7

- Industrial equipment for the manufacture of cast iron cores. - Installed assembly with control panel and auxiliary elements including a Rexroth hydraulic group. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-15

- Mobile sand dosing station for machería. - System consisting of two upper sand storage hoppers. - Travel trolley on rails for feeding several machines. - Motorized movement between working positions. - Timed dosing system. - Includes raised metal structure for support and access. - Electrical panel with SIEMENS SIMATIC HMI display and SIEMENS PLC automation. - Application for automatic feeding of foundry core manufacturing machines. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-9

- Industrial equipment for the manufacture of cast iron cores. - Installed assembly with control panel and auxiliary elements including a hydraulic group. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-17

- The conveyor belt has a metal support structure. - The installation includes an electrical panel and control elements. - Manual operation - Belt width: 1000mm - The scissor lift table shown in some photographs IS NOT included in the lot. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-13

- Total installed power: 60 KW. - Production capacity: 555 untapped moulds / 485 mapped moulds. - Maximum cool-down time: 48 min. - Maximum sand consumption: 110 Tons/h. - Weight of the pieces: from 0.50 kg to 20 kg. - A cooling line consisting of a DISA SBC-2306 belt conveyor with an approximate length of 52000 mm is included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-2

- Automatic horizontal molding line for green sand casting. - Production capacity up to 120 moulds/hour. - Sand consumption 72 Tons/h. - Weight of the pieces: from 20 kg to 100 kg. - Includes: - SEIATSU ACE 5 automatic molding machine (air stream and high-pressure pressing). - Molding box size: 900 × 700 × 230/230 mm. - Nominal production of the molding machine: up to 140 full molds/hour. - Automatic model change. - Hydraulic system and programmable electronic control. - Manual placement line for taps and hammers. - Automatic mold closing system. - 3 ton casting bucket with automatic checkweighing system. - Transport of moulds by means of trolleys on rails. - 5 cooling lanes with capacity for 36 molds each. - 3 streets with forced ventilation and 2 streets with natural ventilation. - Automatic track change transferors. - Rotary trommel for demoulding and sand separatio ...

- Complete installation for the preparation and recovery of sand for foundry. - It consists of: - Various feeding and return conveyor belts. - Polygonal sieve. - FELEMAMG SF-RCP permanent magnet magnetic separator. - Bucket elevator, capacity approximately 200,000 kg/hour. - 3 silos for return sand storage, diameter 4000 mm, approximate capacity of each silo 65 m³. - 4 silos for additives with a diameter of 2000 mm, approximate output 8 m³/hour. - Lung hopper. - 3 material reception silos (coal, bentonite and new sand), diameter 3000 mm, capacity approximately 42 m³ each. - DISA SAM 16-180S mixing mill: year of manufacture 2005, serial number 16.180.18.019, load capacity 5,000 kg, cycle 180 sec. - Fine aspiration. - The sand cooler that appears in a photograph IS NOT included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnectio ...

Technical data Manufacturer: VOITH Type: Roller Grinding Machine Year of Make: 1980 Serial Number: 256 Grinding length: max. 8,000 mm Configuration Suction 2 mounting fixtures for steady rests Grinding emulsion processing, Fabr. NEUHÄUSER Auction-ID: A7-50461-29

Technical data Manufacturer: WOHLENBERG Type: V1250 Year of Make: 1980 Serial Number: D4195 Grinding length: 8,000 mm Spindle Passage: 100 mm Face plate: Ø 1,000 mm Control: Siemens Sinumerik PLC Configuration Tailstock Bezel Face Plate Control panel with touchscreen Suction Auction-ID: A7-50461-28

Class IIA medical device. The unit switches on as expected. All three vacuum pumps are fully functional and can be controlled via the control panel. See images for technical specifications. It shows some signs of wear but is in excellent condition. There is an additional display, the functionality of which is unknown. The door lock has been removed.

2016~3,360 hours (seller estimate: 20 cycles of 7 days each)All cables and connectors

Automated Nucleic Acid Extraction System (DNA/RNA purification)Magnetic bead technology (automated magnetic-bead separation)No (control PC and chemagic software not included)3 Calibration Plates

Incubator Shaker (stackable benchtop shaking incubator)2 units in a stacked configuration (photographed together)

- Power: 4000 KW. - Turbine speed: 8700 rpm. - Inlet steam pressure: 40 bar. - Outlet steam pressure: 3 bar. - Exhaust vapour pressure: 0.1 bar. - Inlet steam temperature: 400°C. - LEROY-SOMER LSA 56 BUL85-4P generator: capacity 4000 KW. - Reducer: SEISA HDS050T . - Gearbox serial number: 00-7K1180 . - Year of gearbox: 2000 . - Reduction ratio: 1/5.806. - Lubrication: ISO VG32. - Rated power of gearbox: 3500 kW. - Input speed: 8700 rpm. - Output speed: 1500 rpm. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-17