outras máquinas e instalações usadas para venda (17,085)

Manufacturer: Rubble Master, Model: RM80GO!, Year of construction: 2013, Condition: Used, ready for operation, Operating hours: 8080 h, Dead weight: approx. 23,600 kg, Inlet opening: 860 × 650 mm, Rotor: 4 strike plates, Rotor diameter: 850 mm, Max. task piece size: about 650 mm, Engine: John Deere diesel engine, Cylinder: 6, Power: 40 kVA, Power: 40 kVA, Tension: 400 V, Sieve surface: 1.050 × 800 mm, Bandwidth: 800 mm, Drop height: approximately 2,990 mm, Volume: about 2.6 m³, Length: 9.275 mm, Width: 2.435 mm, Height: 2.990 mm

Table height: 850mm, probing error MPEp: 3.5μm, length measurement error MPEe: 3.0+L/250μm, machine height: 1845mm, electrical connection: four grounded Schuko sockets 220V with 16A protection, power consumption: max. 700VA, spatial temperature gradient: max. 1°C/m, regularly inspected, with computer. An on-site inspection is possible.

A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.

A bottom-seal bag/sack welding machine Stiegler is available. Film width: 1050mm, section length range: 90mm-650mm, max. operating cycle: 140/min, max. film web speed: 80m/min, max. roll diameter: 800mm, max. web speed: 60m/min, core diameter range: 76mm. Machine dimensions X/Y/Z: approx. 6000mm/1700mm/1600mm, weight: approx. 3400kg. Including 2 welding bars, punching device and Euro hole punching. The edge control of the machine is defective. Documentation available. An on-site inspection is possible.

Ponte móvel de carga Fabricante: MSR Maschinen-Stahlbau Reutemann – GmbH Ano de Fabricação: 2015 Carga útil: 8000kg Design: 20.000 ciclos de carga segundo EN13155 Alterações de carga realizadas:

An optical CNC 3D coordinate measuring machine Keyence is available. Display resolution: 0.1µm, repeatability: 2µm, measurement accuracy: +/-10µm, low magnification: 300mm/200mm, high magnification: 70mm/50mm, max. load capacity: 20kg, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Cortador húmido para telhas de telhado, versão leve para utilização em superfícies inclinadas de telhado

Conjunto de ferramentas para instalar suportes Beftec em telhados planos

A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

1. Quantidade. 3 Fornos de Recozimento em Lote Bell (Par de bases 1-6) Fabricação: EBNER Tipo: HOG 180/320 St – H2 Construído: 1989 Parado: 2025 Cada par de bases (unidades: 1-2, 3-4, 5-6) tem uma coifa de arrefecimento e uma de aquecimento. Bobina diâmetro máximo exterior: 1.650 mm Altura máxima de empilhamento: 3.200 mm Diâmetro do capô: 2000 mm Diâmetro útil (capot interior): 1800 mm Altura útil (diâmetro da bobina 1540 mm): 3400 mm Altura útil (diâmetro máximo da bobina 1650 mm): 3200 mm Carga base máxima: 50 T 2. Quantidade. 1 Fornos de Recozimento Bell Batch (Par de bases 7-8) Mfc.: EBNER Tipo: HOG 180/230 St – H2 Construído: 1989 Parado: 2025 Bobina diâmetro máximo exterior: 1.650 mm Altura máxima de empilhamento: 2.300 mm Diâmetro útil (capot interior) 1800 mm Diâmetro do capô: 2000 mm 2 Capuzes de proteção com carcaça interior.  ...

ALMiG Correia do compressor de parafuso 30-10 | 30 kW | 10 bar | Qualidade industrial À venda está um compressor de parafuso potente e fiável da marca ALMiG (Made in Germany) – ideal para a indústria, produção ou oficinas maiores. Dados técnicos: Fabricante: ALMiG Kompressoren GmbH Tipo: CINTURÃO 30-10 Ano de Fabricação: 2009 Potência do motor: 30 kW Pressão de funcionamento: 10 bar Caudal volumoso: 4,12 m³/min Acionamento: Transmissão por correia

Two Belimed cleaning and disinfection devices RDG with integrated drying are available. Washing chamber dimensions X/Y/Z: 690mm/630mm/800mm, usable volume: 350l, coarse filter: 2mm, fine filter: 1.5mm, drying temperature: 110°C, air filter: HEPA H13, separation efficiency: 99.95%, A0 disinfection value: 3000. Machine dimensions X/Y/Z: approx. 1850mm/900mm/950mm, weight: approx. 400kg. Documentation available. An inspection on site is possible.

A traversing and modular measuring, logging and control system Mahlo for material quality control is available. Number of sensors: 6/frame, product materials: films/nonwovens/paper etc., thickness measurement with laser: sensor: Calipro DML-D, measuring range: 0mm-100mm, repeatability: +/-50µm. Basis weight measurement with x-ray: sensor: Gravimat FMX-T, repeatability (1sigma/1s): 0.1g/m², measuring gap: 60mm, maximum current: 1mA, maximum voltage: 40kVp. Documentation available. An on-site inspection is possible.

Misturador de 2 eixos; com função de inclinação; As asas de forro e sovagem são feitas de aço inoxidável, lâminas de amassar em forma de 2-Z; Comprimento 2,90 m, largura 1,30 m, altura 2,10 m, tamanho da calha 64 x 69 x 55 mm Tipo de motor ZG4 KMR 132 S4; Potência do motor: 7,5 kW; Tensão do motor: 380/660 V; Velocidade nominal do motor: 1435 ... 1480 rpm; Velocidade de saída (caixa de velocidades): 160 rpm. A fábrica foi encerrada em 2024. Mais fotos a pedido

1 eixo com transmissão direta por engrenagens; A espiral de alimentação é acionada por uma caixa de velocidades; As boquilhas e peças sobressalentes são fornecidas separadamente em palete; Inclui um gabinete de controlo com controlo (que necessita de renovação); Comprimento 3,70 m, largura 1,10 m, altura sem tolva 1,35 m, altura do funil 0,50 m, abertura da entrada 35 x 35 cm Tipo atual: CA trifásico; Tensão de funcionamento 380 V; carga ligada 2,5 kW, tipo motor KMR 160 M8; Potência do motor 11 kW; Rotação do motor 720 rpm. A fábrica foi encerrada em 2024. Mais fotos a pedido

A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.

LaserCleave para conectores simplex Usado, comprado como visto Visualização por telef. Disposição possível

Controlador de Microscópio Digital para a Série VHX-7000 Consola para VHX-7000 Unidade de Câmara Câmara de Alto Desempenho VHX 7020 Tripé (motorizado em XYZ 100mm) Objetiva VH Zoom 20x-200x Adaptador tripé para VH-Z20 Adaptador de polarização para VH-Z20 Software de Medição 3D para VHX-7000 Suporte para VHX-S770E/750E Visualização por telef. Disposição possível Usado, comprado como visto, sem garantia Preço = 53000,00 € + IVA Fatura a vencer quando estiver pronta para envio ou entrega

Motor DC, Lenze, Tipo 225-5, 2450 min-1, 53 KW

Tube film width: 60-215mm, film thickness: 0.06-0.12mm, max. tube film roll diameter: 300mm, film core diameter: 76mm, bag length: 60-600mm, output at bag length 100mm and film thickness 0.06mm: 15 pcs/min, print image dimensions: 300x213mm, print length: max. 300mm, optional print length: up to 600mm, table dimensions: 880x460/600mm, table height: 850mm, connected load: 2.3kW, fuse protection: 10A, supply pressure: 6bar, rel. humidity: 25%-85%, noise emission: 75dB(A), length: 1200mm, width: 1200mm, height: 1550mm, weight: 250kg, with documentation. An on-site inspection is possible.

Film width: 420mm, max. film roll diameter: 280mm, film length range: 500-1000mm, film core diameter: 76mm, film type: airpad, film thickness range: 0.042-0.08mm, capacity: 25-49 cycles/min, fuse protection: 16A, connected load: 2kVA, energy consumption: 1.1kWh, compressed air connection hose diameter NW10: 4-8bar, air consumption: max. 82Nl/min during cushion production, max. 3.5Nl per cycle, continuous sound pressure level: 70dB, length: 1600mm, width: 800mm, height: 1300mm, weight: approx. 266kg. An on-site inspection is possible.

X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible.

A Liebherr container reachstacker is available. Attachment: container spreader, rated capacity: 45t, capacity 2nd/3rd row: 35t/18t, load center: 2250mm, engine type: D936, engine power: 270kW, number of cylinders: 6, max. travel speed: 25km/h, max. lifting height: 16000mm, max. horizontal outreach: 7250mm, max. stacking height 1st row: 6 containers, turning radius: approx. 10m. Machine dimensions X/Y/Z: approx. 4500mm/6500mm/5850mm, weight: approx. 71t, operating hours: 6077h. Documentation available. An on-site inspection is possible.

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg

Comprimento de lançamento aproximadamente 2500 mm, largura aproximadamente 300 mm, altura de descarga cerca de 720 mm

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Silo vertical usado em aço inoxidável, fabricado pela empresa alemã AZO, capacidade: 12 toneladas (aprox. 7,2 m³). O silo apresenta um chão vibratório, uma válvula de descarga do silo e um tubo de saída. Usado para armazenar pó de PVC. 10 unidades disponíveis.

Various small machines from a packaging factory are available. 1) Multi-spindle paper drilling machine Constanting Hang 106MK/8, year of manufacture: 1980, drilling spindles: 8, drilling range: 3mm-8mm, hole spacing range: 36mm-630mm. Documentation available. 2) Vibrating table Müro 70x72 ST, paper dimensions X/Y: 700mm/450mm, max. stack height: 100mm, weight: approx. 50kg. 3) Small extraction unit Kongshilde TRL 40, year of manufacture: 2023, machine dimensions X/Y/Z: approx. 900mm/1000mm/950mm. 4) Conveyor belt, year of manufacture: 2018, belt height: approx. 970mm, belt dimensions X/Y: approx. 2300mm/600mm, machine dimensions X/Y/Z: approx. 2400mm/950mm/1050mm. An on-site inspection is possible. Only a package sale is possible.