outras máquinas de alimentos usadas para venda (1,102)

Non vibratory liquid and solid separator (whey sieve) previously used for separating the lumps of curd out of the whey. Stainless steel and closed design Capacities possible up to 50.000 ltr/h depending on product. Motor: 2,2 kW - 400 V - 8,2 A - 1.420 rpm - 50 Hz - 3 Ph., Type of Machine: Whey sieve, Capacity: up to 50.000 ltr/h depending on product, Motor: 2,2 kW - 400 V - 8,2 A - 1.420 rpm - 50 Hz - 3 Ph, Total dimensions: 160 x 70 x 75 cm, Weight: 270 kg

Scratching table approx. 120x140 cm

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Table can sealing machine 99 mm, no nameplate, max. can height 200 mm, 230 V, table model, purchased before 2000 for 1,636.13 EUR net

Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...

Wet-grinding honing and polishing machine DICK, nameplate cannot be found, disc ø 150 mm, total 3 shafts, 380 V, table model

Dismantling knife approx. 6 pcs., 2 knife sharpeners DICK Rapid Steel

APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Powder dissolver, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system la ...

Aluminium dismantling table approx. 200x80 cm, backsplash, base, no chopping board, no contents

Bacterial removing separator (Bactofuge) with nozzles. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, new base plate, feet, desludge cyclone, OWM watervalve and service tools for maintenance including pressing tool.  , This Bactofuge is already convertered to a rubber damped silent gear drive!, Additional features:, Excluding:, - Control panel., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 13.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 45 kW - 1.465 rpm - 400 V - 50 Hz - 84,5 A, Weight: 2.700 kg, Dimensions: 165 x 135 x 190 cm

Sealing device BS packaging type VA3 230 V year 2020, table model, purchased in 2020 for EUR 1,786.45 net

Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...

Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Butter milk pump: 3 kW. Feed pump: 3 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h s ...

Chainmail, 2 aprons

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate and feet, desludge tank, control panel (original Westfalia), water valves, all inlet/outlet pipes with manometer / flowindicator and service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 20.000 liter per hour, Bowl speed: 4.700 rpm, Motor power: 37 kW - 380 V - 72 A - 1.475 rpm - 50 Hz - 3 Ph, Weight: 2.200 kg, Dimensions: 190 x 130 x 225 cm

Wheel type disc atomizer with high speed belt driven motor. Motor power: 22 kW - 30 HP. Can be used for a spray dryer with an output up to 1.000 kg/h of powder. Wheel diameter: 210 mm. Stainless steel AISI316L wheel. Sanitary execution. Weight 400 kg., Type of Machine: Atomizer, Capacity: Used for a spray dryer with an output up to 1.000 kg/h of powder, Wheel diameter: 210 mm, Motor: 22 kW - 380 V - 42,5 A - 2.935 rpm - 50 Hz - 3 Ph, Dimensions: 120 x 120 x 235 cm, Weight: 400 kg

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), desludge cyclone, base plate, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval) and waterbox (original Alfa Laval)., Additional features: Excluding:, - Service tools for maintenance., Capacity 10.000 - 15.000 liter per hour., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 5.069 rpm, Motor: 22 kW

Cooling unit KÜBA, nameplate not legible

O sistema de soldadura de revestimento natural pode ser usado em mesas de enchimento ou em linhas automáticas de enchimento de todos os fabricantes

2 tanques idênticos com capacidade de 25000 l cada, com 4 pés, Agitador, Conector CIP Diâmetro 2800 mm Altura 5600 mm Anteriormente utilizado para produção de leite infantil Preço por peça

A Baader refiner for the separation of soft and solid components is available. Throughput capacity: approx. 800kg/h, connected load: 3kW, drum hole diameter: 1mm, machine dimensions X/Y/Z: approx. 1100mm/900mm/1300mm, weight: approx. 450kg. An on-site inspection is possible.

A Pulsotronic metal detector for liquid and pasty products in pipeline systems is available. Pipe diameter: 100mm, max. operating pressure: 10bar, max. operating temperature: 80°C, version: EX. Machine dimensions X/Y/Z: 1250mm/550mm/700mm, weight: approx. 50kg. On site inspection is possible.

A Dinnissen centrifugal screening machine for classifying screening of bulk materials is available. Screening area: 2.2m², screen basket division: 5, inlet height: 900mm, screen basket fineness: 250µm, min. screening chamber operating pressure: 0.5bar. Machine dimensions X/Y/Z: approx. 2200mm/1050mm/1650mm, weight: approx. 1050kg. Without control cabinet. Documentation available. An on site inspection is possible. Image is an example.

A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible.

2 unidades e 1 grande cabine de secagem feita de aço inoxidável, incluindo tubagem, para secagem suave de alimentos (ervas, chá, capim-do-trigo), secagem a baixa temperatura. Secagem abaixo dos 40°C, permitido apenas para uso interior. Muito bem construída. Dimensões: Agregados - 1,95 x 1,25 x 2,00 m, Cabine de secagem: 7,40 x 2,67 x 2,50 m, Aço inoxidável: 1,4301 Agregado 1: Construído em 2012, Agregado 2: Construído em 2014, Cabine de secagem: Fabricado em 2015. O dispositivo de limpeza a vapor Blue Evolution XL da Beam também pode ser adquirido. Teremos todo o gosto em enviar-lhe a ficha técnica. Preço VB

2 prensas de óleo - KEK 0101 - capacidade: 100 kg/h aprox. 20 anos Potência do motor: 15 kW Pronto para uso imediato incluindo várias peças sobressalentes

A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

A universal commercial dishwasher Hobart is available. Basket inner dimensions X/Y: 570mm/675mm, machine dimensions X/Y/Z: approx. 800mm/950mm/2050mm, weight: approx. 200kg. On-site inspection is possible.

Two gravimetric belt weighfeeders K-Tron are available. Load cell measuring range: 60N, belt width: 300mm, throughput: 650kg/h, max. grain size: 10mm. Machine dimensions X/Y/Z: approx. 1400mm/750mm/450mm, weight: approx. 150kg. The machine control was overhauled recently. Documentation available. An on-site inspection is possible.