serras usadas para venda (1,263)

cutting diameter: 320 mmsaw band length: 4670 mmcutting width: 580 mmtotal power requirement: 7,4 kWweight of the machine ca.: 3 tSawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mmLength of cut, min./max. 0 - 580 mmDistance from column to saw band, max. 690 mmCutting speed, infinitely variable 16 - 160 m/minDimensions of saw band, length x Ø approx. 4,670 x 38 mmLength of remaining pieces, automatic/single cut 100/10 mmSaw blade drive, approx. 4.4 kWTotal electrical load, approx. 7.4 kW - 380 V - 50 HzWeight, approx. 3,000 kgAccessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection sw ...

cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 0 - 90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 230 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble-miter band saw- Variable speed control- Miter cuts up to 60° left and 45° right- Vise with quick-clamping mechanism- Blade tension monitoring- Automatic electric cooling systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mmcutting diameter: 100 mmsaw blade turning speeds: 40 / 80 U/mincapacity 90 degrees: square: 90 mmcapacity 90 degrees: round: 100 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tCold circular saw- 45-degree miter cut (one-sided)- Material stop up to 1170 mm- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180 x 100 mmWorking height: 925 mmsaw blade turning speeds: 17 - 70 U/mintotal power requirement: 3,0 kWweight of the machine ca.: tdimensions of the machine ca.: 1,8 x 1,1 x 2,0 mAutomatic cold circular saw- CNC control- Micro-lubrication systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mmsaw band length: 6.300 mmcutting width: 700 mmtable height: 800 mmtotal power requirement: 14 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: mAutomatic Horizontal Band SawCutting Capacity at 90° (Round): Ø 360 mmCutting Capacity at 90° (Rectangular): 700 x 340 mmCutting Capacity at 75° Mitre (Left & Right):Ø 340 mm / 650 x 340 mmCutting Capacity at 60° Mitre (Left & Right):Ø 340 mm / 600 x 340 mmCutting Capacity at 45° Mitre (Left & Right):Ø 340 mm / 400 x 340 mmMaximum Cutting Diameter: 360 mmMaximum Cutting Width: 700 mmMaximum Cutting Height: 340 mmMinimum Cut-Off Length: 35 mmMinimum Workpiece Size: 10 x 10 x 10 mmRemnant Length (Manual): from 10 mmRemnant Length (Automatic): from 160 mmBlade Tension: 85 barCoolant Tank Capacity: 150 lBlade Speed: 19 – 130 m/minMain Drive Motor: 5.5 kWHydraulic Pump Motor: 5.5 kWCoolant Pump Motor ...

work piece width: 1.200 mmworkpiece height: 500 mmbore diameter: 8 - 40 mmNumber of drilling agregates: 3 Stk.spindle speed:: 150 - 1.100 U / mintool changer: 15 Stksaw blade diameter: 1.430 mmcutting speed: 8 - 30 m/mintotal power requirement: 43 kWweight of the machine ca.: 20 tdimensions of the machine ca.: mWorking CapacityAngle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mmChannel sections: 80 × 45 mm to 400 × 110 mmI-beams: 80 × 46 mm to 600 × 220 mmWide flange beams (HE): 100 × 100 mm to 1,008 × 302 mmSpecial wide flange and welded T-beams: up to 1,200 × 500 mmWorkpiece DataMax. workpiece width: 1,200 mmMax. workpiece height: 500 mmDrilling UnitNumber of drilling spindles: 3 (1 vertical, 2 horizontal)Drilling diameter: 8 – 40 mmSpindle speed: 150 – 1,100 rpmDrilling feed: 0 – 500 mm/minRapid approach: 3,850 mm/minRapid return: 8,000 mm/minPositioning speed: 15,00 ...

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10/13/15/20/26/30 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m- mitre cutting +/- 60 ° with DRO -Accessories: new sawblade 400 mmø, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 4870 mmcutting width: 500 x 250 mmtable height: 640 mmsize of profile - max.: 400 x 400 mmcutting speed: 40 - 120 m/minsaw band length: 4870 x 27 x 0,9 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2,0 x 1,0 x 1,5 mManual band sawHydraulic saw blade tensioningHydraulic workpiece clampingHydraulic saw frame lift/lowerIncludes 4 spare saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine number: 1260Reference: Walter - Lot 19 Auction-ID: A7-48268-8

saw band length: 2910 x 27 x 0,90 mmControl: Kasto CompactControll capacity 90 degrees: round: 260 mmcapacity 90 degrees: flat: 300 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 200 mmcapacity 60 degrees: round: 165 mmcutting speed: 20-110 m/minmin. dia.: 10 mmCutting Length min.: 6 mmtotal power requirement: 2,5 kWweight of the machine ca.: 0,86 tdimensions of the machine ca.: 1,8 x 1,8 x 1,7 mFully automatic band saw (CNC)Includes right-hand roller conveyor with programmable stop carriage & digital display:Stop positioning is handled by the integrated measuring system,with the position shown to millimeter precision on the separate display.Dimensions (L x W x H): 2.70 x 1.10 x 1.70 m.Max. measuring length: 2.30 m.Includes hydraulic clamping and feed unitIncludes coolant systemIncludes work lightIncludes small parts and spare partsIncludes 2 band saw blades ...

length: 380 mm max.band length: 430 mmweight of the machine ca.: 0,5 t: : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 380 mmpneumatic clamping: ja : 46893 weight of the machine ca.: 1,3 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 280 mm: 250 mm: 350 x 200 mm: 240 mm: 220 mm: 230 x 220 mm: 170 mm: 150 mm: 170 x 100 mmsaw tape speed: 37 + 74 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,5 x 1,7 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 225 x 32 mmcutting diameter: max. 70 mm bei 90° mmmiter cut: 0°-45°-60° miter cut: 1° Skala spindle turning speed range: 42 / 84 U/minMax. round cutting cross-section at 90°: 70 mmMax. rectangular cutting cross-section at 90°: 80 x 50 mmMax. round cutting cross-section at 45°: 64 mmMax. rectangular cutting cross-section at 45°: 60 x 50 mmSaw blade diameter: 225 mmBore diameter: 32 mmIncludes lubrication systemIncludes base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 5744 x 1,3 x 41 mmcutting width: 420 mmcutting speed: 15 - 110 m/min: 7,5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,9 x 2,4 x 2,1 mHydraulic band saw machine with- Material feed 1000mm- Motorized saw blade tension- Emergency stop device- Replacement saw bandsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mmsaw band length: 0 mmcutting width: 0 mmcutting speed: 0 m/mintotal power requirement: 1,0 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 2,2 x 2,05 x 1,5 mHorizontal Bandsaw- Max. Miter Angle: 45°- Coolant System- Emergency Stop- 1300 mm Infeed Roller Conveyor- 2 Spare Saw BladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcutting diameter: 130 mmsaw blade turning speeds: 30 / 60 U/mincapacity 90 degrees: square: 120 mmtotal power requirement: 4,8 kWweight of the machine ca.: 1,8 tdimensions: 1,4 x 1,2 x 2,3 mSemi-automatic Cold Circular Saw- Miter cutting- Micro-spray lubrication system- Safety guard- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mmcutting diameter: 100 mmsaw blade turning speeds: 40 / 80 U/mincapacity 90 degrees: square: 90 mmcapacity 90 degrees: round: 100 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 200 mmband length: 350 mmcapacity 90 degrees: round: 200 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,45 tdimensions: 1,4 x 1,4 x 1,3 mAutomatic hacksaw- with 1000 mm infeed roller conveyor- preset counter- material stop with trigger, max. 600 mm- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 180 x 100 mmsaw blade turning speeds: 3000 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 0,51 tdimensions: 3,8 x 1,6 x 1,7 mAutomatic Aluminum Circular Saw- Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system- Infeed roller conveyor (3500 mm)- Transport dimensions 6.0m x 2.0m x 1.6mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 230 mmcutting speed: 35 - 70 m/mincutting width: 260 x 200 mm: mmsaw band length: 2720 x 27 x 0,9 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,68 tdimensions of the machine ca.: 1,8 x 1,8 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmcapacity 90 degrees: flat: 280 x 160 mmcapacity 90 degrees: square: 240 x 240 mmband length: 425 x 40 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: flat: 150 x 250 mmcapacity 45 degrees: square: 170 x 170 mmtotal power requirement: 1,8 kWweight of the machine ca.: 450 kgdimensions of the machine ca.: 1,4 x 0,8 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mmcutting diameter: 150 mmcutting lenght max.: 1000 mmweight of the machine ca.: 1.35 tdimensions of the machine ca.: 2.7 x 1.5 x 1.65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mmcutting diameter: 90 mmstroke: mmturning speeds: 40/80 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 350 Kgdimensions of the machine ca.: 0,9 x 0,8 x 1,5 mCold circular saw- Machine light- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width of the band swa blades: 50-200 mmSharpening pitch: 60 mmWeight: 750 kgWINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNCPNK-CNC is designed to grind all types of band saw blades used in metal cutting.PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technologyTechnical specifications:- Band saw width 50-200mm- Band saw length Max. 12m- Blade thickness Min 0.4mm- Tooth pitch Max. 60mm- Tooth depth Max. 30mm- Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°)- Feed rate (speed controlled) Max. 90 teeth/min.- Grinding wheel dimensions D: Ø250mm d:Ø20mm- Grinding wheel thickness 5-13mm (depending on tooth pitch)- CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm- CBN Grinding wheel thickness 2-3mm (depending on tooth pitch)- Grinding wheel rotation (speed controlled) 1400-5500 r.p.m.- Grinding wheel  ...

saw blade diameter: 400 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: flat: mmturning speeds: 1400 / 2800 U/minengine output: 4,0 kWweight of the machine ca.: 180 Kgdimensions: 1,0 x 0,9 x 1,2 mManuell underfloor aluminum circular sawThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 440 mmsaw band length: 5200 x 1,1 x 34 mmcutting width: 610 x 440 mmcutting speed: m/mintotal power requirement: 3,7 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,7 x 1,55 x 1,5 mBand saw horizontal- Coolant system- Emergency stop switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 115 mmcapacity 90 degrees: flat: 100 x 150 mmband saw dimensions: 1638 x 13 x 0,65 mm: 20/29/50 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmsaw band length: - mmcutting width: - mmtotal power requirement: 0,7 kWweight of the machine ca.: 0,240 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.