serras usadas para venda (1,223)

cutting diameter: 320 mmsaw band length: 4670 mmcutting width: 580 mmtotal power requirement: 7,4 kWweight of the machine ca.: 3 tSawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mmLength of cut, min./max. 0 - 580 mmDistance from column to saw band, max. 690 mmCutting speed, infinitely variable 16 - 160 m/minDimensions of saw band, length x Ø approx. 4,670 x 38 mmLength of remaining pieces, automatic/single cut 100/10 mmSaw blade drive, approx. 4.4 kWTotal electrical load, approx. 7.4 kW - 380 V - 50 HzWeight, approx. 3,000 kgAccessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection sw ...

roll diameter: 500 mmthroat: 485 mmworkpiece height: mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro da lâmina de serra: 400 mmmiter: . : Kühlung peso da máquina ca.: 1 tnúmero: 4 Stück

capacity 90 degrees: round: 172 mmcapacity 90 degrees: square: 170 mm: 170 x 170 dimensions of saw-band: 2035 x 20 x 0,9 mmdimensions: 430 x 960 x 520 mband speed: 30 - 80 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 38 kgSPECIAL PRICEBerg & Schmid - Assembly band saw PBS 171 ESCPowerful and particularly robust metal band sawAluminum die-cast saw table and infinitely variable cutting speed forMiter cuts up to 60°Optional: machine base type 20508The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mmdimensions of saw-band: 2730 x 27 x 0,9 mmtable height: 920 mmcutting speed: 35 + 70 m/min: 240 mmstroke back stop: 230 mmcross-slide: 270x230 : 210 Impact energy: 200 Air consume per blow: 200x210 : 130 mm: 130 mm: 130x160 mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,26 tdimensions of the machine ca.: 0,9 x 1,6 x 1,74 m• miter left 60°• Quick-release vise with quick-release device a.• Quick release lever for easy handling• Frame and gear made from one piece, very quiet cut and very low vibration• Electrical monitoring of band tension and band breakage, saw band cover.• Carbide saw band guide• Large machine bed• Machine base (disassembled) with automatic coolingThe AutoCut system consists of:Hydraulic cylinder, feed control, spring assembly, limit switchAutomatic saw frame lowering via the hydraulicCylinder, continuously adjustabl ...

saw blade diameter: 315 mmcapacity 90 degrees: round: 108 mmcapacity 90 degrees: square: 93 mm: 150 x 90 mmWorking height: 920 mmsaw blade turning speeds: 17+33 oder 33+66 U/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 0,8x0,9x1,95 mSPECIAL PRICE!High-performance vertical circular saw VKS 315 HA (20154/20155)• miter left 60° + right 45°• Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift• Saw table with large rotating plate and particularly stable vice for optimal material tension• Robust prism guide of the saw head (dovetail guide adjustable)• Automatic cooling• Machine base with chip drawer• Metal handle for high clamping force• Spring packageSemi-automatic function:1. Saw starts2. Clamp material3. Rapid lowering to the beginning of the material or cut the same for ser ...

capacity 90 degrees: round: 310 mmcapacity 90 degrees: square: 280 mm: 400x250 saw band length: 4020x34x1,1 mmband speed: 37 + 74 m/mintable height: 940 mmtotal power requirement: 1,8/2,2 kWweight of the machine ca.: 0,68 tdimensions of the machine ca.: 1,5 x 1,78 x 1,3 mACTION PRICE !Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy• miter left 60° + right 45°• Industrial hydraulics, powerful 18 bar• Best access to the material• Ammeter to check a.- Optimization of cutting force- Tape life- cutting course• Vise closes/opens hydraulically• Chip removal brush• Material turntable with ball bearings b.• Adjustable quick-release c.• Material height sensor (automatic cut start detection)Semi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the start of the material or the same for series cutting cut4. Saw band off5. Raise the fr ...

saw blade diameter: 275 mmcapacity 90 degrees: round: 80 mmcapacity 90 degrees: square: 70 mmcapacity 90 degrees: flat: 100 x 60 mmcapacity 45 degrees: round: 70 mmcapacity 45 degrees: square: 60 mmcapacity 60 degrees: flat: 80 x 50 mmclamping range: 110 mmturning speeds: 45 / 90 U/mindimensions of saw-blade: mmtotal power requirement: 0,5 kWweight of the machine ca.: 0,07 tdimensions of the machine ca.: 900 x 700 x 1600 mManual cold circular saw with:- Machine base- Support rail 1500mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diâmetro da lâmina de serra: 255 mmInclinável da lâmina de serra: 45 Altura de corte: 75 mmDimensões da mesa: 640 x 920 (ausgezogen) mmLâmina de serra: 30 mmPotência do motor: 1,6 kWFrequência de carga ligada: 230 VPeso da máquina ab.: 32 kgDimensões (L/W/H): 720 x 1080 x 920 mm

cutting diameter: 185 mmsaw band length: 2.085 x 20 x 0,90 mmtable height: 915 mmband speed: 35/70 m/mincapacity 90 degrees: round: 185 mmcapacity 90 degrees: square: 150 mmcapacity 90 degrees: flat: 220 x 150 mmconnected load frequency: 400 Vtotal power requirement: 0,8 kWweight of the machine ca.: 195 kgdimensions of the machine ca.: 550 x 1.280 x 1.740 mm mmMetal band saw with stepless electronic speed control andautomatic lowering.• Selector switch for hydraulically controlled or manual band arm lowering• Saw arm can be swiveled up to 60 ° to the right• Quick-action vice• Belt guide with 8 ball bearings• Hydraulic saw band tension with tension pressure display and band break shutdown•Incl. Coolant system•Incl. Machine cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mmdimensions of saw-band: 2480 x 27 x 0,9 mmtable height: 935 mmcutting speed: 45 + 90 m/min: 225 mm: 145 mm: 90 mm: 150 x 245 mm: 190 x 150 mmcapacity 60 degrees: flat: 120 x 90 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,24 tDimensions (LxWxH): 1380 x 580 x 930 mm- With an output of 1100 watts, the device is ideal for processing hard types of metal.- Thanks to the emergency stop and automatic switch-off, you can work safely- The low-noise electric motor ensures a quiet working atmosphere- Comfortable buttons guarantee pleasant operation of the device.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350 x 200 saw band length: 3375 x 27 x 0,9 mmband speed: 37 + 74 m/mintable height: 940 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,61 tdimensions of the machine ca.: 1,5 x 1,75 x 1,9 mDouble miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic coolingFigure is semi-automatic.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 530 mmcapacity 90 degrees: round: 180 mmcapacity 90 degrees: square: 170 mmcapacity 90 degrees: flat: 380x70 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: square: 150 mmcapacity 45 degrees: square: 290x70 mmtotal power requirement: 2,2 kWweight of the machine ca.: 350 tdimensions: 1,1 x 0,9 x 1,5 mUnderfloor aluminum circular saw, hydropneumatic semi-automatic.· Maintenance unit for pneumatic control· Turntable with ball bearings· Suction nozzle for chip extraction system· 2 pneumatic vertical clamps· Rotation range 180°· Movable rear material stop = enlargeable cutting area· Saw blade feed continuously adjustable· Two-hand safety controlHorizontal vices (option)· Mist spray device for cooling emulsion· Engine braking· Machine base· The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary. Saw blade optionalThe data for  ...

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,9 x 1,4 x 1,8 mHydropneumatic fully automatic· Miter Left/Right· Bevel head cuts up to 45° (shifter) a. b.· Hydro-pneumatic control of the saw head· Pneumatic double clamping device· Pneumatic vertical clamping device· Electro-pneumatic material feed unit with material hold-down device· Vernier for length adjustment· Integrated coolant spray device· Swarf suction nozzle on the saw blade protective hood· Leftover piece length in automatic mode 210 mmMPS control:· Save cut start/end· Display of current consumption, number of pieces, cutting time...· Adjustable w ...

saw blade diameter: 275 mmcapacity 90 degrees: round: 90 mmcapacity 90 degrees: square: 80 mmcapacity 90 degrees: flat: 100x70 mmcapacity 45 degrees: round: 75 mmcapacity 45 degrees: square: 70 mmcapacity 60 degrees: flat: 80x60 mmtotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,5 x0,85 x0,95 mThe versatile professional metal circular saw. Convincing in performance and price.• For miter cuts left up to 45°• For sawing steel, stainless steel and, to a limited extent, aluminum profiles• Spindle vice with double clamping arm for low-burr cuts• Cone safety clutch made of hardened steel to protect the saw blades.• 2 speeds 33 + 66 rpm• Automatic cooling directly on the saw blade• Double bearing for saw head• 24 V safety switch in the handle with restart lock• Length stop, assembly tool• Closed cast, massive cast superstr ...

cutting diameter: 227 mmsaw band length: 2455 mmtable height: 840 mmcutting width: 260 mmturning speed range:: 36 / 72 m/mindimensions of saw-band: 2455 x 27 x 0,9 mmcapacity 90 degrees: round: 227 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 260 x 220 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 145 mmcapacity 45 degrees: flat: 200 x 220 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,25 tdimensions of the machine ca.: 0,8 x 1,4 x 1,5 mMiter band saw- automatic cut- Base frame- Coolant pump- Chip brush for cleaning the saw band- Vise with quick adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diâmetro da lâmina de serra: 450mm, largura de corte: 4mm, tipo de lâmina de serra: HM/HSS, furo de montagem: 50mm, parafusos de fixação: 4, parafusos de fixação de círculo de passo: 80mm, diâmetro do parafuso: M12. Velocidade de alimentação da lâmina de serra: 3.5m/min, retorno rápido: 4.5m/min, velocidade de alimentação: 10m/min/20m/min, comprimento de corte curso único: 10mm/1000mm, curso duplo: 2000mm, inclinação do prato giratório: +/-90. Dimensões da máquina X/Y/Z: aprox. 2700mm/1450mm/1900mm, peso: aprox. 1500kg. Documentação disponível. É possível uma inspeção no local.

Uma serra de fita de metal vertical Jaespa está disponível, limando, moendo e polindo máquina. Diâmetro do rolo: 420mm, altura de corte: 280mm, largura de corte: 405mm, velocidade de corte: 25m-280m/min, dimensões da mesa X/Y: 600mm/600mm, inclinação da mesa esquerda/direita: 15/45, altura de trabalho: 955mm, faixa de comprimento da lâmina de serra: 3200mm-3400mm, potência da unidade: 1.5kW. Dimensões da máquina X/Y/Z: aprox. 1250mm/1000mm/2050mm, peso: aprox. 500kg. Documentação disponível. É possível uma inspeção no local.

Capacidade de corte 0: material redondo: 250mm, material quadrado: 230mm/230mm, material plano: 280mm/200mm. Capacidade de corte 45: material redondo: 190mm, material quadrado: 180mm/180mm, material plano: 180mm/180mm. Capacidade de corte 60: material redondo: 120mm, material quadrado: 110mm/110mm, material plano: 110mm/110mm. Velocidade de serragem: 72m/min, dimensões da lâmina de serra X/Y/Z: 2950mm/27mm/0.9mm, peso: aprox. 370kg. É possível uma inspeção no local.

Está disponível um sistema de serra de fita Kasto totalmente automático. Faixa de corte em 90: material redondo: 530mm, material quadrado: 530mm/530mm, material plano: 530mm/640mm, comprimento da lâmina de serra: 7675mm, largura da lâmina de serra: 54mm, espessura da lâmina de serra: 1.6mm, velocidade de corte: 120m/min. Dimensões totais do sistema X/Y/Z: aprox. 5200mm/2700mm/2700mm, peso: aprox. 6000kg. Incluindo transportadores de rolos. Documentação disponível. É possível uma inspeção no local.

Diâmetro da lâmina de serra: 350mm, velocidade: 3400rpm, capacidade de corte em 90: 120mm/75mm, capacidade de corte em 45: 90mm/65mm, dimensões da máquina X/Y/Z: aprox. 700mm/900mm/1000mm, peso: aprox. 150kg. Documentação disponível. É possível uma inspeção no local.

Diâmetro da lâmina de serra: 450mm, faixa de corte 90 redonda / quadrada / perfis: 160 / 145 / 320x50mm, faixa de corte 45 redonda / quadrada / perfis: 160 / 130 / 250x40mm, velocidade de corte: 1950 / 3900m / min, velocidade de alimentação: 0-3000mm / min, faixa de mitre: 0 a 90, faixa de giro: 180, peso: aprox. 1,5 t. É possível uma inspeção no local.

Cutting range 90°: round material: 120mm, square material: 100mm/100mm, flat material: 180mm/100mm, cutting range 45° left: Round material: 120mm, square material: 100mm, flat material: 130mm/100mm, cutting range 60° left: Round material: 110mm, square material: 90mm/90mm, flat material: 90mm/100mm, cutting range 45° right: round material: 105mm, square material: 100mm/100mm, flat material: 130mm/100mm, motor power: 2.2kW, saw blade type: HSS 370, saw blade thickness: 3mm, saw blade width: 40mm, working height: 925mm, machine dimensions X/Y/Z: approx. 850mm/1100mm/2100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

Diâmetro da lâmina da serra: 275mm, faixa de corte redonda (90): 100mm, faixa de corte plana (90): 160mm/80mm, velocidade: 40rpm - 80rpm. É possível uma inspeção no local.

Diâmetro da lâmina de serra: 275mm, potência: 1.9kW, velocidade: 80rpm, faixa de corte (plana): 140mm/70mm, faixa de corte (mante): 100mm/70mm, capacidade máxima de corte de tubo: 3 polegadas, capacidade de corte de material sólido: 80mm/60mm, capacidade de corte de material quadrado: 50mm/50mm. Dimensões da máquina X/Y/Z: aprox. 800mm/700mm/1500mm, peso: aprox. 300kg. É possível uma inspeção no local.

Dimensões da lâmina de serra: 3660mm/27mm/0.9mm, faixa de corte em 90 material redondo/material plano: 300mm/385mm x 220mm, velocidade da lâmina de serra: 20m-70m/min, diâmetro do rolo da lâmina de serra: 450mm, potência: 1.5kW, dimensões da máquina X/Y/Z: aprox. 220mm/1500mm/1200mm. É possível uma inspeção no local.

Uma serra de fita Knuth está disponível. Potência: 0.75kW, tensão: 400V, frequência: 50Hz. É possível uma inspeção no local.

Diâmetro da lâmina de serra: 2x400mm, comprimento máximo de corte: 4000mm, ângulo de corte: +/-45. Documentação disponível. É possível uma inspeção no local.

Fuho Tipo 1408 Serra de Fita de Metal Serra de fita vertical Largura de passagem 350mm Dispositivo de lâmina de serra Motor 1kW 400V 50Hz Tesoura para serras A mesa pode ser girada transversal e longitudinalmente Guia da lâmina de serra na parte superior e inferior Comprimento da banda 2362mm G&2996-M40GH