máquinas para produtos farmacêuticos e cosméticos usadas para venda (382)

Pneumatic dimensional measurement device Solex Metrology, PNEUMATIC VERSION, Pneumatic metrology is a dimensional measurement technique for parts, presenting two important advantages:, - the great measurement precision, - measurement speed, This device is used for dimensional control of parts with holes whose dimensions must comply with very tight tolerances, parts that cannot be touched due to their surface condition, or parts with complex geometry., It has thus been present for many years in industrial sectors such as biomedical (prostheses), cosmetics (sprays), pharmaceuticals (dosing pumps), aerospace or automotive (mechanical parts), where it is recognized for its robustness, reliability and very high measurement precision., PRINCIPLE OF OPERATION, The principle is based on a pneumatic flowmeter that operates by direct reading of the drop or rise in pressure corresponding to the cha ...

Motorized vertical test bench IMADA MV-100BA., Dynanometer Chatillon:, 100 x .05 Lb, 50 x 05 Kg, 500 x .5 N

Ventilator, BINDER CO2 incubator, Volume 150 litres, 2 shelves, Internal dimensions (mm): 490x495 H 595, external dimensions (mm): 820x757 H 1175, Number of shelves: 2, Elec: 230V / 7.4 A / 50 Hz , Maximum temperature (°C): 60

GLATT coating turbine, Glatt GC 750/500 enrobing machine from 1994 with interchangeable drums, explosion-proof version (Ex), - Processing equipment: Glatt GC 750 Coater (equipment used only for testing), - Perforated drums (diameters 500 mm and 750 mm) with:, Air intake and discharge housings for both drums, Drum capacity 750 mm: 50 – 75 kg/batch, Drum capacity 500 mm: 15 – 45 kg/batch, - Manual unloading, - Spray arm with nozzle adapter, Spraying system with 1 Schlick nozzle, - Control cabinet (pneumatic/electric) with Siemens S5 PLC, - Air handling unit (AHU) 7AIR comprising:, - Inlet air fan, - Filtration F7 and H12, - Preheating, - Dehumidification, - Heating, - HERDING Dust Collector, - Outlet air fan, - WIP spray nozzle (in-place cleaning) inside the drum and external nozzle, Elec: 3x400 / 24VDC / 50Hz , Useful volume: 500mm: 15-45kg 750mm : 50 - 75kg , Spray nozzles: X, ...

Laser marking Marken Imaje Smartlase 130x

Removal of label from the top with label dispensing system AVERY type ALX734LH, Sold with its stainless steel mast., Labeler / Stickerer AVERY DENISON type ALX 734LH :, - Printing speed: 50 to 400 mm/s, - Print width: 104 mm max, - Ribbon width: 20-140 mm, - Label production: Up to 400 labels, - Label width: 30 to 134 mm, - Label length: 25 to 225 mm, - Chuck diameter: 38.76,102 mm, - Roll diameter: 300 or 400 mm, Minimum label deposition height (mm): 1225, Maximum label deposition height (mm): 1400

Motorized curved stainless steel belt conveyor, Width of strip 100mm, Adjustable feet in height up to 150 mm, Motorized conveyor: Yes , Conveyor length (mm): 700mm, Conveyor belt width (mm): 90mm, Maximum working height (mm): 1050mm, Electric: Motor: SEW-USOCOME: 230 V / 50 Hz / 0.55 kW , Speed variation: no

The ZANASI 40 E model is a reciprocating motion machine designed for the processing and filling of two-piece hard capsules, as well as their sequential closing and ejection., Possibilities for powder dosing as well as granule dosing., Several powder formats available:, Full format:2,4, Cadence / hour: 40 000 capsules/hour , Positions: 6 , Machine absorption (Kw): 2.2 kW , Elec: 380 V / 50 Hz / 14.2 A

Markem Imaje UI 100 control panel., Connects to a MARKEM laser marking system

Dissolution tester SOTAX CE70., SOTAX CY 7-50 Pump, Sold with accessories., Positions: 7 , Elec: 230 V

Rimek Compressor, 10 stations, 6 tons of compression, For B-type tooling, Maximum diameter of tablets 16mm, Maximum filling 17mm, Maximum rate 18 000 tablets / hour, Number of revolutions per minute: 30, Sold with several formats:, round diameter 6 mm incomplete (1 die missing)., round diameter 7 mm complete, round diameter 12 mm complete, oblong diameter 18x7 mm complete, Elec: 230 V / 50 Hz , Dimensions (mm): 563x530, Cadence / hour: 18000, Number of revolutions/min: 30, Compression (kN): 6 tons , Maximum tablet dimensions (mm): 16, Maximum powder filling height (mm): 16, Machine height with hopper: 1565, Machine height without hopper: 1535, Format sold with the machine: Yes

High-pressure reservoir, Capacity (in L): 20 L, Max pressure (in Bar): 6,9 Bar, Maximum temperature (in °C): 121 °C, Capacity: 20 L, Dimensions (mm): ⌀ 230 mm, Height (mm): 640 mm, Max temperature (in °C): 121 °C

Gellulier LGA, Machines for filling 100 capsules with vibrator., Current format: size 2., Dimensions (mm): 355x260 H 210

Gelulleuse MACOFAR for CD20-type powder, Sold with 3 powder formats: 00, 0 and 1, Maximum theoretical speed: 20 000 / hour, 50Hz / 2.5kW, Net weight 800kg, Sold with its vacuum pump, Elec:: 3+N+P, Link to manufacturer: .romaco/products/product-details/cd-series

The SolidC UltraPure pump is an efficient and economical centrifugal pump that meets the requirements of pharmaceutical industries. It gently handles products and resists chemical agents., Pump: Centrifugal pump , Dn (mm): 34 , engine type: WEG, dn (mm): 34 , Engine power: 380 V 50 Hz 7.5 kW , Link to manufacturer: .alfalaval.fr/produits/transfert-des-fluides/pompes/pompes-centrifuges /solidc-ultrapure/

Glass chromatography column BPG., Inner diameter (mm): 200, Total volume (L): 16, Lower tapping: 1, Top tapping: 2, Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2

BIOBLOCK SCIENTIFIC orbital shaker, Dimensions (mm): 345x350 H 200 , Minimum / maximum agitation speed: 30 / 420, Minimum / maximum stirring speed: 30 / 420, Minimum / maximum stirring height: 30 / 420

Vibration-damping marble table, The weight of the table (445kg) is ideal for a weighing table., Dimensions (mm): 805x900 H 88 , Weight:: 445 Kg

Vacuum pump, Flow rate (m3/h): 35, Elec: 400 V / 50 Hz , Engine: Brook Crompton 1.5 kW

Chromatography column., Volume (L): 3.5 Liters , Allowed pressure: 3 bar , Allowed temperature: 40°C , Lower tapping: 1, Top tapping: 2, Authorized pressure: 3 bar , Bottom stitching: 1, Lower stitching: 1, Top stitching: 2, Top nozzle: 2

METTLER TOLEDO XS1 Weighing Sorter, Left right, Balance model: METTLER TOLEDO Type: BF2-L-P, Max 100 grams, Resolution : d=0.01g, Cadence 65 pesées/mn, Weighing from 0 to 100 grams, Max weighing range (g) :: 100 g , d :: 0.02 g , T :: 90 g , Elec: 240V 50 Hz , Dimensions (mm): 900x900 H 1490 mm, tape width (mm): 100 mm , Balance belt width (mm): 55 mm

Horizontal flow-pack machine sold with:, a conveyor, stencil machine, an ink jet, Very little used, in excellent condition., All Wrapper RCN270 packaging machine from 2012, - Linear speed: up to 25 m/min, - Width of the bags: from 30 to 270 mm, - Length of bags: from 50 mm to infinity, - Product heights: up to 25 mm, - Production rate: up to 150 cycles/min per lane, - Diameter of the reels: 400 mm as standard, AVERY DENISON labeler type ALX 734LH:, - Printing speed: 50 to 400 mm/s, - Print width: 104 mm max, - Ribbon width: 20-140 mm, - Label production: Up to 400 labels, - Label width: 30 to 134 mm, - Label length: 25 to 225 mm, - Chuck diameter: 38.76,102 mm, - Roll diameter: 300 or 400 mm, DOMINO A320i Inkjet, Conveyor :, - Conveyor belt width: 100 mm, - Conveyor belt length: 2000 mm, - Dimensions: 2000x595 H 1240 mm, Elec:: 380 V / 4000 W , Link to the manufacturer: : all-wrap/fr/rcn ...

15 peristaltic pumps WATSON MARLOW / FLEXICON, Type PD 12 P, Compatible tube sizes:, Dia. int. 0.5 to 8.0 mm, Internal diameter of 0.5 mm / 0.8 mm / 1.2 mm / 1.6 mm / 10.0 mm / 12.5 mm / 3.0 mm / 3.2 mm / 4.8 mm / 5.0 mm / 6.0 mm, Precision:: ±0,5 % , Elec: : 230 V / 50 Hz / 1850 W , Link to the manufacturer: : .wmfts/fr-fr/flexicon/remplissage-et-controleurs-oem/remplisseuses-oem /

11 Watson-Marlow / Flexicon peristaltic pumps for sale in bulk or individually., Type PD 12P, Compatible tube sizes:, Dia. int. 0.5 to 8.0 mm, Internal diameter of 0.5 mm / 0.8 mm / 1.2 mm / 1.6 mm / 10.0 mm / 12.5 mm / 3.0 mm / 3.2 mm / 4.8 mm / 5.0 mm / 6.0 mm, Precision :: ±0,5 %, Elec:: 230 V / 50 Hz / 1850 W , Link to the manufacturer: : .wmfts/fr-fr/flexicon/remplissage-et-controleurs-oem/remplisseuses-oem /

DIMITRO 50kg jib, Capacity kg :: 50 , Band height (5 mm): 1935 , Dimensions (mm): 450x905 H 2270, Jaw opening (mm): 630

LABORATORY MASTICATING TURBINE MANESTY ACCELACOTA, Pierced turbine with anti-surge (contre pales), Spray arm, For batch sizes of around 10 kg, Dimensions (mm): 1300x860 H 1650mm, Inner diameter (mm): 600, Depth (mm): 440, Perforated turbine: Yes, Batch size: 15kg, Perforated impeller: Yes, Weight (kg): 386

Horizontal rack-type die-transfer machine with alternating movement., Manufacturer: CAM, Type : PMM, Year : 1998, Designed to condition blister packs, strips, trays, rigid or flexible tubes, vials, sachets, soaps and other food or cosmetic products., Cadence / min: 20 to 140 cycles/min , Elec: 400 V / 50 Hz / 8.6 A , A + B (mm): max 140 , A (mm): min 15 / max 90, B (mm): min 12 / max 70 , C (mm): min 50 / max 200

- Useful capacity of product tank: 50 litres, - Total capacity up to the rim of the tank: 80 liters, - Service suppression in the product tank: -1/+2,0 bar, - Maximum temperature in the product tank: 125 °C, - Service suppression in the double envelope: 4.0 bar, - Maximum temperature in the double enclosure: 140 °C, - Stainless steel: 1.4435, - 1350 Kg, Variable speed of motors:, - External mixer arm: 11-44 rpm, - Internal shaft mixer: 21-84 rpm, - Homogeneizer: 1150-4350 rpm, Volume: 80 litres , Useful volume: 50 litres , Hustle: 3 types of agitation: outer arm / inner arm / homogenizer , Elec: 380 V / 50 Hz, Cover diameter: 119 mm, Mobile tank: No, Double envelope: Yes, Double envelope volume: 13 litres , Double envelope pressure: 4.0 bar , Weight (kg): 1350

Single stainless steel jacket tank of 110 liters Operating pressure: 2 bars 3 tappings + 1 CIP ball (cleaning in place) Possibility of fixing an electrical panel laterally and connecting an agitator at the bottom of the tank, Enquiry: Request more information, Request for information: Request more information, Information request: Request more information

equipped with, a LAETUS system, bottle filler, Was previously used on a syrup line, Elec: 380V 50Hz, A + B (mm): 140 mm max, A (mm): 15 - 90 mm, B (mm): 12 - 70 mm, C (mm): 50 - 200 mm, Dimensions (mm): 2280 x 1570 mm, Height (mm): 1755 mm, Documentation: X in Spanish