132 ENGEL máquina utilizada para venda

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

Key data: 20000 kN

Angebot/Oferta: Engel Duo 17060/2000 Robô Viper 60 aprox. 4900h Ano 2021

Key data: 4000 kN, 80 mm

Máquina + Robô Viper 12

Key data: 5000 kN

Oferta(4x): Engel Duo 1800/500 BJ./ANO 2016 38500h

Key data: 7000 kN, 40 mm

Engel E-DUO 740H/740L/700 combinado BJ./ANO 2017 aprox. 3871 hrs/h Visão geral da máquina: Força de fixação: 7000 kN Diâmetro do parafuso: 40 mm Velocidade do parafuso: 300 rpm Curso de dosagem: 200 mm Controlo: Engel CC300 Peso: 22 toneladas Horário: 3871 horas Caraterísticas: Gira-discos elétrico de 6 estações Ajuste elétrico rápido para o curso da placa da máquina Duas unidades de injeção, cada uma com parafuso de 3 zonas (D45 mm) 32 zonas para controlo de corredores quentes Unidades elétricas de plastificação Documentação completa incluída Estado: Pronto a utilizar (utilizado) Horário: 3871 Estado da máquina: Já desmontada Defeitos ou peças em falta: Sem defeitos conhecidos, com manutenção regular Documentação técnica: Completa e disponível (pode ser consultada no local)

Key data: 20000 kN, 135 mm

Dosagem 1: Plastificar 1: Diâmetro do parafuso mm 135 Diâmetro do parafuso mm 120 | Artigo 135.º | 150 Curso de dosagem Curso de parafuso mm 610 Capacidade máxima de injeção cm3 6899 | 8731 | 10780 Velocidade do parafuso min-1 125 Torque de minhoca Torque de parafuso Nm 14000 Velocidade máxima do parafuso torque reduzido min-1 135 Velocidade máxima do parafuso de binário reduzido Nm 12963 Velocidade de parafuso reduzida, torque máximo do parafuso, min-1 112 Torque máximo do parafuso velocidade do parafuso reduzida Nm 15630 Desempenho de plastificação (3 zonas) 1.2 Taxa de recuperação (parafuso de 3 zonas) 1,2 g/s 165 | 222,9 | 231,3 Desempenho de plastificação (barreira) 3 Taxa de recuperação (parafuso de barreira) 3 g/s 208,3 | 279,2 | 264,6 1) Valores para poliestireno até a unidade de injeção 2550 de acordo com ETR 10100 1) Dados para GPPS até a un ...

Key data: 4200 kN

Máquina em produção !1

Máquina de moldagem de injeção de anjo velha

máquina em stock !

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. Gebr. Máquina de moldagem por injeção de dois componentes com robô Fabricante: ENGEL Tipo: ES650H/200W-200HL-2F Ano de Fabricação: 2004 Força de fixação: 200 toneladas Espaçamento da barra de ligação sem parcimens Altura mínima de instalação: 500 mm Curso inicial: 750 mm Parafusos DN 1: 40 mm Deslocamento máximo: 251 cm³ Peso da peça moldada em cv: 216 g Parafuso DN 2: 25 mm Deslocamento máximo: 69 cm³ Peso da peça moldada em hp: 60 g Controlo: CC200 Equipamento técnico: -Robô Engel, tipo: ERC23/1-E -4 slides de núcleo -Controlo do gira-discos

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. Gebr. Máquina de moldagem por injeção de dois componentes com robô Fabricante: ENGEL Tipo: ES650H/200W-200HL-2F Ano de Fabricação: 2001 Força de fixação: 200 toneladas Espaçamento da barra de ligação sem parcimens Altura mínima de instalação: 550 mm Curso inicial: 700 mm Parafusos DN 1: 40 mm Deslocamento máximo: 251 cm³ Peso da peça moldada em cv: 216 g Parafuso DN 2: 25 mm Deslocamento máximo: 69 cm³ Peso da peça moldada em hp: 60 g Controlo: CC200 Equipamento técnico: -Robô Engel, tipo: ERC23/1-E -4 slides de núcleo -Controlo do gira-discos

Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5 full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine.

Ref. no.: 18657 Hersteller: ENGEL Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision ENGEL e-victory 440/160: This is a hybrid machine (servo-hydraulic + electric) ⸻ How it works ✔ Electric part: Injection unit (screw movement) Ensures very high precision and process stability ✔ Hydraulic part: Clamping unit (mould closing) Maintains clamping force efficiently without continuous energy consumption This system combines: The precision of an all-electric machine With the power a ...

Ref. no.: 18597 Hersteller: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and  ...

Geared motor, electric motor, electric geared motor, permanent magnet motor -Manufacturer: Engel, Permanent Magnet Motor Gear Motor with Brake -Motor type: GNM31650-G2.6-B5.2 -Voltage: 24 V / 50 W / 3000 rpm -Transmission: Type G 2.6 i= 30:1 -Shaft: Ø10 x 23 mm -Protection rating: IP54 -Brake: 0.5 Nm -Dimensions: 250/125/H95 mm -Weight: 2.4 kg

Key data: 2600 kN, 950 g/PS, 70 mm

Ano de fabrico 2005 Força de fixação: 260 toneladas. Diâmetro do parafuso: 70 mm Horário de funcionamento: 125.000 h incluindo robô de remoção: Engel ERC 55/O-E Bom estado, manutenção regular, energizado

Key data: 1500 kN, 380 g/PS, 50 mm

Ano de fabrico 2005 Força de fixação: 150 toneladas. Diâmetro do parafuso: 50 mm Horário de funcionamento: 117.426 h incluindo robô de remoção: Engel ERC 34/1-E A máquina está em bom estado e tem sido regularmente revisada

Máquina de moldagem por injeção Engel DUO 4550/800 BJ 2004

Four Engel injection molding machines are available. 1) Engel ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55mm, shot volume: 511cm³, injection pressure: 1616bar/2052bar, nozzle stroke: 350mm, nozzle contact force: 67kN, clamping force: 1500kN, opening stroke: 606mm, ejector force: 60kN, ejector stroke: 150mm, min. mold installation height: 294mm, platen dimensions X/Y: 750mm/520mm, weight: approx. 9500kg, control system: CC100, operating hours: approx. 79000h. Including Engel HLi automation robot. 2) Engel ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22mm, shot volume: 38cm³, injection pressure: 1500bar/2050bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 300kN, opening stroke: 330mm, ejector force: 24kN, ejector stroke: 70mm, min. mold installation height: 110mm, platen dimensions X/Y: 550mm/380mm, weight: ap ...

Key data: 2500 kN, 700 g/PS, 60 mm

Ano de construção: 2002 Diâmetro do parafuso 60mm Volume de plano 735cm³ Força de fixação 250t Altura mínima de instalação da ferramenta: 250 mm 2 Movimentos principais 1 válvula de ar manuseamento/robô ENGEL ECR 52/1-EA, RC100 6 zonas integradas de hot runners Horário de funcionamento apenas às 14.109 h

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

A large-format two-component injection molding machine Engel is available. Screw diameter: 120mm, metering stroke: 480mm, max. shot volume: 5430cm³, screw speed: 130rpm, L/D ratio: 20, plasticizing capacity: 132g/s, injection pressure: 1600bar, nozzle stroke: 950mm, nozzle force: 150kN, heating capacity: 80kW, pump capacity: 110kW, oil filling: 1600l, injection unit weight: 17t. Clamping force: 17000kN, opening force: 1230kN, opening stroke: 2550mm, mold installation height min./max.: 800mm/1600mm, max. platen distance: 3350mm, platen dimensions X/Y: 2640mm/2250mm, tie bar spacing X/Y: 1805mm/1405mm, tie bar diameter: 285mm, ejector stroke: 300mm, ejector force: 230kN, clamping unit weight: approx. 82t. Overall system dimensions X/Y: approx. 11500mm/7300mm, total system weight: approx. 100t. Documentation available. An on-site inspection is possible.

This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine.

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information.

Engel Victory 1350/220 Tech. 2005 holmenlos 1 correia transportadora; 1 movimento principal Engel ES 500 H 200V / 110 HL - 2 F BJ 2001 holmenlos 2 agregados ; 2 Movimentos principais Engel Victory 500 / 120 Plus 2004 empate sem controlo de barra he / usp ; 1 movimento principal

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.

This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.