23 FMB máquina utilizada para venda

Article: bar loading magazine Manufacturer: FMB Type: Minimag 18 Yob: 2007 Bar feeder was used on a cam-controlled long turning lathe Strohm M125 Two identical models are available for sale Please, contact us for getting more information and pictures.

Article: bar loading magazine Manufacturer: FMB Type: Minimag 18 Yob: 2007 Bar feeder was used on a cam-controlled long turning lathe Strohm M125 Two identical models are available for sale Please, contact us for getting more information and pictures.

diameter: 2-23 mm length: 4200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Bar diameter: 3-26 mm Bar length: 3200 mm Last installed on a CNC sliding head lathe WEIGHT AND DIMENSIONS Dimensions of loading magazine: approx. 4300 x 701 x 1400 mm Weight of loading magazine: approx. 980 kg The machine can be viewed by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

FMB loading magazine Can be viewed by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

FMB loading magazine - switch cabinet with contents Condition: Used Sale of individual components also possible For sale is a used FMB loading magazine control cabinet including fully installed technology, as shown in the pictures. ? Scope of delivery (as visible in pictures): Control cabinet incl. complete cabling & control Control components (e.g. Siemens S5/S7, relays, terminals, power supply units, frequency inverter if applicable) Individual components can also be sold (e.g. PLC, panel, power supply unit, relay, etc.). ) Manufacturer: FMB Maschinenbaugesellschaft mbH Type: Loading magazine / bar loading magazine Power supply: Standard 230/400 V (depending on control system) Condition: Used, untested, as shown Documentation: Documents available Subject to changes and errors in technical data and specifications as well as prior sale!

Technical data Bar diameter: 3-26 mm Bar length: 3200 mm Last installed on a CNC sliding head lathe STAR SR 20R II WEIGHT AND DIMENSIONS Dimensions of loading magazine: approx. 4300 x 701 x 1400 mm Weight of loading magazine: approx. 980 kg The machine can be viewed by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

com ecrã digital

Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible.

Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible.

Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible.

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

bar material dia.: 5 - 65 mm Bar length: 3000 mm feed length: max. 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centro de Usinagem de Perfil Comprimento de usinagem aprox. 8.500 mm, tamanho máximo do perfil 300 x 200 mm, Curso XYZ = 9.300 x 1.000 x 800 mm, Unidade de serragem (cortes de mitre), unidade de perfuração/fresagem de 4 eixos (16 kW, 18.000 rpm), trocador de ferramentas 24 vezes opção de operação do pêndulo, opção Deslocamento do elemento de fixação, preparação Flowdrill, , gabinete de segurança, painel de controle BECKHOFF (software de programação CamQuix), unidade de refrigeração IDEA 16CCM-50-A-F-3 (N.º C2019010009, ano de construção 2019), Gabinete de controle, máquina sob potência no uso da produção Preço original 176.500 EUR

bar material dia.: 65 mm de comprimento da barra: 3000 mm tensão: 400 V peso da máquina ca.: 1,2 t dimensões da máquina ca.: 5,32 x 0,95 x 1,52 m

This FMB Turbo 8-80 was manufactured in 2012. It is a work piece handling system connected to Okuma, offering efficient handling capabilities. Consider the opportunity to buy this FMB Turbo 8-80 work piece handling system. Contact us for more information.

Country of origin: Germany, L max mm: 3.2, Operating hours: 0

Máquina de lixar borda para painel e PERFIS tipo FMB 2 I composição: 1 cinto : andador de velocidade variável inclinado (com Inversor) - potência motora Hp 2 2 cinto : andador de velocidade variável inclinado (com Inversor) - potência motora Hp 2 Sopradores para limpeza do cinto Variador de velocidade do tapete de 5 a 25 mt/min Prensa superior ajustável com rodas de borracha Suporte lateral para painéis largos volt. 380/50

A serra de fita FMB JUPITER foi fabricada em 2000 na Itália pela FMB s.r.l.. A máquina, projetada para corte preciso de peças, é uma ferramenta indispensável em qualquer instalação de produção. O processo de usinagem é realizado de forma totalmente automática por meio de uma serra de alta qualidade de 3180 mm de comprimento, que é acionada por um poderoso motor elétrico com uma caixa de velocidades contínua e roda de transmissão. O design robusto também elimina qualquer vibração gerada durante a usinagem, garantindo uma estabilidade excecional, mesmo durante o trabalho de produção mais intensivo. Em 2024, a serra de fita automática FMB passou por uma atualização, durante a qual o painel de controle foi substituído por um novo. A serra de fita FMB JUPITER pesa 1150 kg. Dados técnicos da serra de metal FMB JUPITER - Ângulo de corte: 0-60 - Capacidade de corte ...