Fusos de fresamento de eixo KÖLLE F45 + Vorschub

Swivel spindle milling machine KÖLLE F45 with feed and integral stop

very good condition, the machine comes from a small model making company and has been used only a little
everything works perfectly
all bearings and guides are OK, the machine has a very smooth running
Year of construction 1992
on the milling fence a stop jaw can be adjusted in depth, with fine adjustment and scale, so that dressing work can also be carried out, e.g. on a gluing profile, the entire milling fence can also be completely adjusted in depth with an adjustment wheel and a threaded spindle, this allows very precise and fast adjustments, the milling depth can be read off on a digital display
with spindle lock by lever
the machine has the control panel at eye level
with AIGNER integral stop
the chips can be discharged very well, with 2 suction nozzles 125 and 100mm
with 30mm spindle, which can be swivelled continuously from -5 to 45°, the spindle is swivelled electrically, for fine adjustment there is a handwheel and a digital display
a 40mm spindle can also be installed
with right/counterclockwise rotation
the machine will be delivered and demonstrated by us personally throughout Germany for 220.00 euros, so you have no risk when buying, shipping to Austria and the rest of the EU is also possible on request
with a large table opening, which can be reduced by different rings (this means that milling cutters with a very large diameter can also be used and you can also mill safely with small milling cutters)
with 3000, 4000, 5000, 6000, 8000 and 10000 rpm
the spindle height adjustment is also electric, for fine adjustment there is also a handwheel and a digital display
with extendable additional support, 2200mm long
very robust and durable design, the machine was built for the heaviest milling work, it is suitable for all milling work
Optimum power transmission through V-belt drive
with description
with 4-roller feed HAFFNER, type 904
the feed has clockwise/counterclockwise rotation and 4 speeds, the feed rollers are individually mounted
the machine table is 1200mm wide and 1000mm deep, it has 500mm long table extensions on the left and right
the machine can be used immediately
380V, 6000 and 8600W by the 2 speeds, the machine has an extra strong motor
with all the necessary protective devices, engine brake and emergency switch, the machine is approved by the Holz- BG, it has the GS seal of approval
the machine weighs about 1000kg
with motor protection switch against overload
Professional equipment, no DIY store scrap
optimal, simple, fast and safe handling
seller offer No. resale 169409394