Moldadores inclinados KÖLLE F45 Vorschub + AIGNER Anschlag

Swivel spindle milling machine KÖLLE F 45

very good condition, the machine comes from an assembly company and has only stood for the last few years, it was no longer needed
everything works perfectly
all bearings and guides are OK, the machine has a very smooth running
Year of Make: 1990
with control panel at the top
on the milling fence, both stop jaws can be adjusted in depth, with fine adjustment and scale, so dressing work can also be carried out, e.g. on a gluing profile, the entire milling fence can also be completely adjusted in depth with an adjustment wheel and a threaded spindle, which allows very precise and fast adjustments
with AIGNER integral stop
with spindle lock by lever
the chips can be discharged very well, with 2 suction nozzles, 125mm at the milling stop and at the machine table it is 100mm
with 30mm spindle, which can be swivelled continuously from -5 to 45°, the spindle is swivelled electrically with a very accurate display, the fine adjustment can be made by hand with a handwheel
the height adjustment is also electric and there is also a handwheel for fine adjustment
with right/counterclockwise rotation
the machine will be delivered and demonstrated by us personally throughout Germany for 220.00 euros, so you have no risk when buying, shipping to Austria and the rest of the EU is also possible on request
with a large table opening of 375mm, which can be reduced by different rings (this means that milling cutters with a very large diameter can also be used and you can also mill safely with small milling cutters)
with 3000, 4000, 5000, 6000, 8000 and 10000 rpm
the table is made of high-ribbed gray cast iron
with 30mm spindle in the machine, another spindle can also be installed
very robust and durable design, the machine was built for the heaviest milling work, it is suitable for all milling work
Optimum power transmission through V-belt drive
with description
with 3-roller feed HOL HER, type ET 117
the feed has clockwise/counterclockwise rotation and 8 speeds, the feed rollers are individually mounted and all are as good as new
the machine table is 1000mm deep and 1200mm wide, it has an extendable additional support 1200mm long
the machine can be used immediately
380V, 4700 and 5700W through the 2 speeds
with all necessary protective devices, motor brake and emergency switch, the machine is approved by the Holz- BG, it has the GS test seal
the machine weighs about 1000kg
with motor protection switch against overload
Professional equipment, no DIY store scrap
optimal, simple, fast and safe handling
seller offer No. resale 170338879