Máquinas de desempenar chapa (19)

Key data: 550 mm, 3 mm

Fabricante: DATE Tipo: MN7-550U Ano de Fabricação: 2000 Largura máxima da folha: 550 mm Potência: 3x200V, aprox. 2,5kW Espessura da folha: aproximadamente 0,3 – 3,2 mm Peso da bobina: até 1–2 toneladas

material width: 0200 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 30 mmspeed: 56 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHydraulic driveAll rollers drivenSide belt guide with handwheelPSS300 controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2 mm, 10 mm

Endireitadora de Folhas 2.000 x 10 mm Execução.. 4high Blechdicje . 3-10 mm Endireitar roletes.. 13 pcs. Endireitar rolos durcm.. 145 mm Rolos de suporte, Duchm 290 mm Peso... 32.000 kg Mota de condução... 30 KW

material width: 250 mmmaterial thickness: 2 mmdiameter: 1200 mmtotal power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2500 mm, 32 mm

Fabricante / Marca: WMW Schwermaschinenbau Wildau Tipo/ tipo: UBR 32 x 2500-7/16 Lagernummer / número de estoque: 1019 Baujahr / novo em: 1969 Largura máxima da folha: 2500 mm Comprimento do fardo / comprimento de convexidade dos rolos: 2700 mm Espessura máxima da folha (St 50): 32 mm Espessura máxima da folha (St 34): 39 mm espessura mínima da folha (St 50): 8 mm Número de rolos de alisamento: 7 rolos/rolos Número de rolos de alisamento acionados: 5 rolos Diâmetro do rolo de alisamento dos rolos de alisamento: 290 mm Rolos de alisamento de saída / diâmetro dos rolos de alisamento de entrada/saída: 345 mm Número de rolos de suporte: 13 Stützrollendurchmesser / diâmetro dos rolos de suporte: 288 mm Oberbolenhub/ curso do feixe superior: 120 mm Velocidade de endireitamento / velocidade de endireitamento: 16 m / min Hauptantri ...

material width: 1250 mmmaterial thickness: 12,00 mmno. of straightening rolls: 19 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmsheet length min.: 100 mmwork height max.: 900 mmspeed ca.: 2 - 20 m/min.total power requirement: 31 kWweight of the machine ca.: 16,50 tdimensions of the machine ca.: mThe straightening machine HÄMMERLE is suitable for the precision alignment of parts.The hydraulically controlled guard locking also allows good judging resultscomplex geometry.Infeed and outlet roller table inclusiveDimensions (L / W / H, approx.)Rectifying unit / frame 2300 x 3200 x 1800 mmHydraulic 1600 x 900 x 1800 mmSwitch cabinet 600 x 400 x 1900 mmTank capacity 400 lOil filling by the customerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 10 mm

Alisador de chapa metálica, parcialmente revisto       nivelador de folhas, parcialmente revisto   Tipo / tipo: UBR 10 x 2000 /1-16 WDKS Fabricante / Marca: WMW Gotha Ano: 1982/2024 eletricamente parcialmente revisto Largura máxima da folha: 2000 mm espessura máxima da folha (St 50): 10 mm    espessura mínima da folha / espessura mínima da folha: 3 mm   Número de rolos de alisamento: 13 rolos / rolos Diâmetro do rolo de alisamento/diâmetro dos rolos de estraishinging: 145 mm Velocidade de endireitamento: 16 m / min Comprimento do fardo / comprimento de convexidade dos rolos: 2330 mm Distância entre centros de rolos b/n: 150 mm Diâmetro dos rolos inferiores: 290 mm Número de rolos inferiores: 21/24 Número de saídas (superior/inferior): 3 /3 Velocidade de elevação da travessia / velocidade de ajuste. de travessia: 0.71mm/sec Modo de travessia: ...

plate width: 2000 mmsheet thickness - max.: 10 mmsheet thickness - min.: 3 mmnumber of straightening: 13 Rollersstraightening roll diameter: 145 mmstraightening feed: 16 m/minbale length: 2330 mmdistance b/n rollers centers: 150 mmdiameter of bottom rollers: 290 mmmain drive motor: 30 kWweight: 32 t- number of bottom rollers: 21/24- Number of supports (top/bottom): 3 /3- speedof adjustm. of traverse: 0,71 mm / sec- way oftraverse: -18 mm to +42 mm- max. swivellower traverse: 8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Várias peças para alisar máquinas Ungerer, largura de tira 1500 - 1700 mm - Rolos de alisamento, rolos de estuque, armações de rolamento, eixos de engate .. - Engrenagens - Motor - Caixas de velocidades, etc. Mais informações a pedido

material width: 100 mmmaterial thickness: 15 mmno. of straightening rolls: 9 straightening feed: 7 m/mintotal power requirement: 0,75 kWweight of the machine ca.: 380 kgdimensions of the machine ca.: 710 x 920 x 1360 mmFeatures:- 5x driven lower rollers- 4x adjustable upper rollers- Max. cross-section approx. 800 mm²- Mobile use on casters- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC - Peças metálicas de chapa - Roll Alisamento Máquina para alisar e relaxar de peças metálicas de chapa cortadas termicamente, para peças estampadas, para peças metálicas de chapa que tenham sido cortadas ao tamanho com a tesoura de chapa. A nossa máquina de alisar rolos é uma máquina puramente elétrica, não hidráulica, os motores servo controlados eletronicamente permitem o alisamento automático do CNC – alisamento facial controlado no processo contínuo. CNC – máquina de alisar peças metálicas de chapas de precisão controladas para folhas de 0,7 mm a um máximo de 14 mm de espessura da folha a 500 mm de largura da folha Maior largura da folha 1.500 mm Poder de orientação sobre toda a largura - - Qualidade da chapa de aço SR235 de 0,7 mm a 10 mm - Chapa de aço inoxidável de 1 mm a 6 mm Planeamento por - 19 rolos de alisamento com 50 mm ...

plate width: 1650 mmplate thickness: 3 mmstraightening roll diameter: 45 mmsupport rollers: 140 Stk: 17 Stk: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 , 4

Largura de banda - até 460 mm Espessura da fita - 0,5 - 4 mm Motor - 6 kW juntamente com Bobina 1.5 T - sem unidade

plate width: 2500 mmsheet thickness - max.: 32 mmsheet thickness - max.: 39 mmsheet thickness - min.: 8 mmbale length: 2700 mmnumber of straightening: 7 Rollersnumber driven straightening rollers: 5 Stkstraightening roll diameter: 290 mmdiameter of input / output straightening rollers: 345 mmnumber of support rollers: 13 Stkdiameter of support rollers: 288 mmstroke of upper beam: 120 mmstraightening feed: 16 m/minrated power of main drive: 90 kW: 138 kwweight: 79 t- max. sheet thickness( St 50): 32 mm- max. sheet thickness( St 34): 39 mm- min. sheet thickness( St 50): 8 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0400 mmcoil outside dia.: 1400 mmweight max. in kg: 3000 kgplate thickness: 0,80 - 4,50 mmnomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mmfeed rolls: 2 exit pinch rolls: 2 coil width: 600 mmrange of expansion ca.: 470 - 530 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDecoiler DIMECO type 2371 E-FPSYear of construction 2006with hydraulic spreadingwith pneumatic pressure roller from abovewith 6 pieces of band limiting armsStraightening machine DIMECO type 1676 C-VVYear of construction 2000with frequency-controlled drivewith hydraulic band insertion aid with support table, insertion tongue,Pressing arm from abovewith pneumatically ventilated rollerwith side belt guide rollerswith pneumatically adjustable belt transfer tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0250 mmcoil outside dia.: 1800 mmweight max. in kg: 2 x 3000 kg: 3,80 mm: 470 - 530 mm: 21 : 30 mm: 4 : 18,0 kWspeed: 20 m/minpower capacity: 18 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDecoiler AH 3000/2/250/STwith continuously variable drive, hydraulic central spread,Automatic post-spreading system, hydraulic pressure device, hydraulic swivel,Straightening machine RM 3025.4/21with continuously variable drive, driven straightening rollers, manualRoller mill adjustment, quick-change device for the straightening rollersBelt loop control via ultrasoundMaterial thickness / with material width 3.80 / 250 mmMaterial thickness / with material width 6.00 / 100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0400 mmcoil outside dia.: 460 - 530 mmweight max. in kg: 2 x 2000 kgplate thickness: 0,40 - 3,00 mmcoil outside - diam. ca.: 1500 mmnomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mmspeed: 0-40 m/mintotal power requirement: 15 kWweight of the machine ca.: 5,20 tdimensions of the machine ca.: m- straightening machine type KRE 30.400/9with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device- double decoiler type 2000.2 Hwith pneumatic lag brake, hydraulic expansion, hydraulic snubber roll- coil loop control via ultrasoundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0600 mmcoil outside dia.: 1500 mmweight max. in kg: 4000 kgwidth of sheet max. ca.: 3,60 mmsheet thickness - min.: 0,80 mmdiam. of the rolls ca.: 80 mmnomb. of straightening rolls: 7 feed rolls: 2 speed: 5-30 m/minrange of expansion ca.: 475-535 mmexpansion: hydraulisch pinch roll: hydraulisch total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDecoiler type MS 4000- Hydraulic spreading- Hydraulic pressure roller from above- Swivel-in limit roller at the front, contact disc at the rear- Auxiliary drive- Reel movable- Coil lifting tableStraightening machine type MR 58Rollers hardened and ground.- Pneumatically ventilated feed roller- Straightening rollers adjustable as a block- Lateral belt guidance at the inlet- Hydraulic band insertion aid- Straightening head can be opened- Large roll basket and transfer table at the outlet- Ultrasonic  ...

sheet width: 0500 mmcoil outside dia.: 1400 mmweight max. in kg: 4000 kgplate thickness: 0,80 - 3,60 mmdiam. of the rolls ca.: 80 mmfeed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/minrange of expansion ca.: 445 - 530 mmexpansion: manuell total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mControl conversion to SIEMENS S7 in 2012- pneumatic pressure roller on the side- pneumatically ventilated feed roller- Straightening rollers manually adjustable- lateral belt guide at the inlet- Large roller basket at the outlet- Ultrasonic transmitter for loop control- Roller feed type 1125 D- Bandwidth max. 510 mm- Band thickness max. 6 mm with full width 5.50 mm- Roll diameter 125mm- Feed speed: max. 100 m/min.- pneumatically ventilated top roller- Lateral tape guide with digital display- Inlet roller basketThe data for this ad was ...