máquinas de soldagem usadas para venda (1,729)

10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, ef ...

3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...

5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal ov ...

consisting of: - laser welding head in aluminum case - coaxial extension - gas pressure reducer for welding gas supply - operating manual - aluminum carrying case 5300_2 - WSweld Starter Kit Starter Kit WSweld Consisting of: 3 x ring-gap nozzle 1 x focusing mirror 1 x deflection mirror 1 x ZnSe window laser welding head TC08 Replacing the cutting head with the WSweld laser welding head TC08 expands a flatbed machine into a laser welding system. Deep- and heat-sealing welding in one optical system Active cooling of all optical elements Coaxial welding gas supply for perfect laser welds Cross-Jet prevents contamination of the optics Active collision detection The WSweld laser welding head TC08 is compatible with the following machine types: TRUMPF TruLaser 3030 classic TRUMPF TruLaser 5030 classic TRUMPF Trumatic L2530 TRUMPF Trumatic L3030 TRUMPF Trumatic L3040 TRUMPF Trumatic L3050, Mach ...

Especificações: Procedimento: 2 fases Área do filtro: aprox. 17 m² Eficiência de separação: >99% Classe de separação de fumos de soldadura: W3 Capacidade de extração: 1100 m³/h Diâmetro do braço de extração: 150 mm Comprimento do braço de extração: 3 m Conexão de alimentação: 3 x 400 V Potência do motor: 1,1 kW Nível de pressão sonora: 70 dB (A) Dimensões, aprox.: 785 x 730 x 950 mm Peso, aprox.: 106 kg Caraterísticas: - Fabricado na Alemanha - Para quantidades baixas a médias de fumo/poeiras - Adequado para uso ocasional a frequente - Conveniente mudança de filtro através da porta de manutenção - Exaustor de extração pode ser girado e girado 360 graus Equipamento: - 3 novos filtros principais de substituição (preço original aprox. 330 euros cada) - 7 novos pré-filtros de substituição - 2 exaustores de extração (um deles ...

Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible.

A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible.

total power requirement: 230 Volttable diameter: 300 mmtable load: 100 Horizontal kgswivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,0 U/minturning speeds: 1,2 - 12,0 U/minbore: 20,0 mmweight of the machine ca.: 50 kgdimensions of the machine ca.: 480 x 325 x 470 mmFurnishing:- Precise drive unit with face plate, on a stable floor stand.- clockwise / counterclockwise- 2 speed series, stepless- Swivel range from 0 ° - 90 °. Manual tilt- DC gear motor with worm gear, infinitely variable.- diameter of 300 mm. Chrome-plated surface to protect against weld spatter.- The devices control panel is easy to understand and use.- Start / stop via a location-independent foot switch.- The speed and direction of rotation are set on the machine.- HF protected.Scope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range for steel to: 15.0 TS mmcutting range for steel to: 10.0 QS mmcapacity at 100%: 25.0 Amperecutting medium: Druckluft output: von 20 - 40 Amperevoltage: 230 VAir consumption: 230 l/min.output: Eingang 4.9 KWweight: 8.0 kgrange L-W-H: 505 x 147 x 305 mmThe Avalon 40.1 is a light, handy plasma cutting system with highCutting performance and top cutting quality. Their light weight and simplicityHandling makes them the ideal candidate for crafts, workshops andIndustry. Cuts carbon steel, stainless steel, aluminum, copper...Characteristics- IGBT technology- Active PFC technology for high duty cycle and energy efficiency- Manual switch to activate airflow to test air pressure. without having to trigger the burner.- Powerful compact system- Intelligent protection function protects the plasma torch from damage such as incorrect air pressure, missing wearing parts, overloading of the ...

table length: 1500 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 255 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 1500 x 1000 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagon ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 499 kg SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structures.The welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Extreme plasma nitrided version with scale- Sidewall with diagon ...

weight max. in kg: 1250 kgturning speeds: 2,0 U/minheight: max. 1.120 mmTorque: Tisch 490 Nmweight: 685 kgThe Siegmund Roto-Positioner is ideal for welding,Assembly and maintenance work. The positioning takes place via a hydraulic oneTurn and tilt function. The Siegmund Roto-Positioner is also includedequipped with a continuously height-adjustable axis.Furnishing:- Hydraulic rotation of the clamping plate- Tilt range up to 95 °- Hydraulic height adjustment and tilt function- including hand controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3000 kgturning speeds: 1,7 U/minheight: max. 1.620 mmTorque: Tisch 11.750 Nmweight: 1.305 kgThe Siegmund Roto-Positioner is ideal for welding,Assembly and maintenance work. The positioning takes place via a hydraulic oneTurn and tilt function. The Siegmund Roto-Positioner is also includedequipped with a continuously height-adjustable axis.Furnishing:- Hydraulic rotation of the clamping plate- Tilt range up to 95 °- Hydraulic height adjustment and tilt function- including hand controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 537 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including tool set of 16 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Plasma nitrided version with scale- including 6x base equipment- incl. 16 tool set 3:+ 8x 160610.N c ...

table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 354 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including tool set of 16 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Plasma nitrided version with scale- Including 4x basic equipment- incl. 16 tool set 3:+ 8x 160610.N  ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- High-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Bore diameter 28 mm- Surface holes with a 100x100 mm grid- Rounded corners, edges, and holes- Side panel height 200 mm- Side panel hole spacing 50 mm- Surface scale included- Construction reinforced with ribs- Grid lines enable precise setupsThe welding tables are equipped with a scale as standard.Plasma nitrided finish:- Protection against rust, scratches, and weld spatter adhesion- More corrosion-resistant / higher load capacityFeatures:- 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm- Plasma nitrided finish (750) with scale- Includes 4x base feetThe data for this ad was created with ModulMW ...

cutting range for steel to: 35.0 TS mmcutting range for steel to: 25.0 QS mmampere: 20 - 65 Amperecutting medium: Druckluft voltage: 400 Voutput: Eingang 7.8 KWweight: 51.5 kgrange L-W-H: 595 x 250 x 890 mmAvalon 65 AIR with integrated compressorCutting - clean and reliableThe air plasma cutting system Avalon 65 AIR with integratedCompressor is your reliable partner for the demandingMission. Make separation cuts up to one with the Avalon 65 AirMaterial thickness of 18 mm.Characteristics :- IGBT technology- with integrated compressor- Microprocessor control system for excellent and dynamic. Arc properties- CNC interface- HF-free arc starting system for increased reliability. and low EMF exposure- Manual switch to activate airflow around test air pressure. without having to trigger the burner- Intelligent protection function protects the plasma torch. from damage such as incorrect air pres ...

Gun: PH-3N, voltage: 400V, weight: 50kg. Supplied with operating manual, 2x ground cables with clamp BMS/BMK, gas connection, HZ-stud holder, adapter piece and key. An on-site inspection is possible.

Agricultor EL2100 Soldador 230 e 400V Com ventilador de resfriamento e equipamento de condução

Esta oferta destina-se exclusivamente a empresários na aceção do § 14 do BGB. O preço é líquido acrescido de 19% de IVA. Fabricante: ARO Tipo: M 302 Ano de Marca: 1971 Nº 1063655 380 V ~ 50/60 Hz E 100 100 Todas as informações são feitas da melhor forma possível, salvo erros. A venda está sujeita à exclusão de qualquer garantia. A exclusão não se aplica a reclamações por danos decorrentes de negligência grosseira ou violação intencional dos deveres do Vendedor ou a qualquer lesão à vida, à integridade física e à saúde. Outras questões jurídicas Informações podem ser encontradas no site da Witzenmann GmbH sob as palavras-chave "Impressão", "Termos e Condições" e "Proteção de Dados".

Esta oferta destina-se exclusivamente a empresários na aceção do § 14 do BGB. O preço é líquido acrescido de 19% de IVA. Tipo de máquina de solda: Máquina de solda de costura de rolo Fabricante: Nimak Tipo: NMP 7/100 Ano de Marca: 1971 N.º da máquina 71059 Potência nominal: 100 kVA a 50% ED Carga ligada: 175 kVA Tensão primária: 380V Tensão de circuito aberto: 7.3V Sec. Str. dd/máx. 8/33 kA Força do elétrodo: 750 kp Frequência: 50 Hz até 8,8 V em 6 ATU Todas as informações são feitas da melhor forma possível, salvo erros. A venda está sujeita à exclusão de qualquer garantia. A exclusão não se aplica a reclamações por danos decorrentes de negligência grosseira ou violação intencional dos deveres do Vendedor ou a qualquer lesão à vida, à integridade física e à saúde. Outras questões jurídicas Informações podem ser encontr ...

Pistola de soldadura pontual --- Potência nominal a 50%ED: 22kVA Corrente de curto-circuito: 17kA Força do eletrodo: 360daN / curso único Projeção: 95mm --- - Braço do elétrodo AE/2/96g + C34/2/63g --- Controlo de soldadura: a pedido --- Balanceador de molas a pedido --- Garantia 6 meses --- Formação + comissionamento a pedido --- Elétrodos de soldadura por pontos + peças sobresselentes disponíveis em stock

Key data: 25 kp, 150 , 120

Potência nominal a 50%ED: 25kVA Corrente de curto-circuito: 12kA Força do elétrodo: 120daN / curso único Projeção: 150mm --- Controle de soldagem: AR.01 (5 vezes, 2 programa) --- Incluindo opções adicionais: -Interruptor de pé -Interruptor principal - Montado em chapa de alumínio --- Garantia 6 meses --- Formação + comissionamento a pedido --- Elétrodos de soldadura por pontos + peças sobresselentes disponíveis em stock

Key data: 63 kp, 750 , 600

Potência nominal a 50%ED: 63kVA Corrente de curto-circuito: 26.3kA Força do eletrodo: 65-390daN / curso único Garganta: 450-750mm --- Controle de soldagem: MPS 15036 (5 vezes, 1 programa) --- Incluindo opções adicionais: - Footswitch com touchdown "desenergizado" -Interruptor principal --- Garantia 6 meses --- Formação + comissionamento a pedido --- Elétrodos de soldadura por pontos + peças sobresselentes disponíveis em stock

A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible.

A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible.

Máquina de Soldadura Peco Máquina de Soldadura por Ponto Sistema de soldadura Peco de tira plana e electr. Gestão Peco LA 40 Controlo de Ar Bosch E35... Controlo de soldadura DYF Você pode encontrar mais sistemas de soldagem em outros tamanhos - novos e usados - em nossa loja! Custos de envio internacional sob consulta!

welding current: 20 - 100 Acutting capacity: max. 35mm mmopen-circuit voltage: 250 VRequired air-pressure: min. 4 barconnected load: 20 KVAconnected load frequency: 400 Vweight: 0,7 kgDimensions (LxWxH): 1,0 x 0,6 x 0,8 mmPlasma cutting machine with cart- Includes 7m hose package- Spare nozzlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 30 - 100 Acutting capacity: max. 50mm mmopen-circuit voltage: 170 VRequired air-pressure: min. 4 barconnected load: kWconnected load frequency: 400 Vweight: 0,75 kgDimensions (LxWxH): 1,2 x 0,7 x 1,0 mmPlasma cutting machine with cart- 105 RTX torch- Includes 7m hose package- Spare nozzles- Like new, ready for immediate useThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.