Mesas de soldar (95)

Lg.Nr. 26071 Dados técnicos: - Capacidade de carga 650 kg - Dimensões da placa frontal 700 x 700 mm - Mot. da placa facial. infinitamente inclinável 0 - 135° - mot. Movimento rotativo infinitamente ajustável 0,07 - 1,5 rpm - Altura da mesa na posição horizontal 890 mm - E. Botão de controlo - Requisito de espaço aprox. Q 850 x H 890 x D 1200 mm - Peso aprox. 400 kg

Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49461-30

Lg.Nr. 25075 Mot. Mesa rotativa e basculante de soldadura Especificações: - Capacidade de carga 1000 kg - Diâmetro da placa facial 800 mm - A placa frontal pode ser inclinada pelo motor - Movimento rotativo eletrônico. infinitamente variável 0 - 250 cm/min - Transmissão de corrente de soldadura 650 A - Acionamento 400 V / 2,8 kW - Altura da mesa na posição horizontal aprox. 1100 milímetros - Re- + rotação no sentido anti-horário - Necessidade de espaço aprox. L 1200 x A 1100 x P 1500 mm - Peso aprox. 850 quilogramas

Technical equipment: Manufacturer Extraction arm: Plymovent Machine type: Soldering and welding booth / manual workstation Worktop: Steel worktop with perforated grid Suction: 1x Plymovent suction arm with capture hood Monitor: 1x flat screen monitor Scanner: 1x Barcode Scanner Torch: 1x Soldering/Welding Torch Media supply: 1x media plate with gas, compressed air and supply connections Air gun available Protective cladding made of aluminium profiles and transparent protective screens Industrial Aluminum Profile Frame Auction-ID: A1-49461-60

Key data: 1180 mm, 990 mm, 765 mm

Mesa de soldadura e fixação pesada 1.180 x 990 milímetros Altura 765 mm Largura da ranhura de fixação 34 mm Espessura do material 40 mm Peso aprox. 1.020 kg

Untested and Used Viewing desired Auction-ID: A1-49382-44

Tipo de máquina: mesa rotativa de soldagem Marca: Merkle / Conzelmann Tipo CD 50/25 - 320 Tensão de ligação 1 x 230 V Faixa de velocidade 0,25 – 2,5 rpm, infinitamente variável Controle de velocidade 1 : 10 Binário 2.5 – 10 Nm Diâmetro da placa facial 250 mm Placas frontais - passagem interna 10 mm Ângulo de inclinação da placa frontal 135 Capacidade de carga vertical 0,5 kN = 50 kg Altura da mesa 320 mm Manual de movimento basculante, fixável Binário basculante 90 Nm Pantógrafo 400 A 80 % d.c. Conexão para - interruptor de pé simples - Interruptor de pé duplo - Controlo remoto do pé Idade 3 anos Condição: tão bom quanto novo Peso 44 kg Garantia de 24 meses a partir da data de entrega Preço original 2.198,00 € + IVA Preço da oferta: 1.690,00 € + IVA Interruptor de pé simples com cabo de 3  ...

New in box, Holes: 28 mm, Thickness: 20mm, Weight: +- 880kg, Application: welding, clamping, metalworking, assembly and construction work Auction-ID: A1-47357-67

Mesa de extração de fumos de soldadura Mesa de soldadura DCE UMA150HG5 desactivagem Mesa de soldadura com sucção integrada com filtro Fabricante de controlo de pó colecionadores de pó Tipo UMA 150H G5 Descanse de acordo com as fotos

Sale from caldelabra/lamp post factory liquidation. Welding table 202x300 cm Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-14

Especificações: - Tabela de posicionamento da capacidade de carga aprox. 750 kg - Diâmetro da chapa de chapa 500 mm - diâmetro máximo de obra de 1600 mm - Gira-discos de altura na posição horizontal aprox. 750 mm - Gira-discos com direita, + corrida à esquerda - Giratório rotativo sem fim 360 - Tempo de viragem por revolução 12,5 segundos. - Pan esquerda + direita - Ângulo de rotação do eixo 180 - Tempo de giro para 180 ângulos giratórios 10 seg. - Botão de 2 x pé duplo para gira-discos + braço giratório - hydr. Parafusos de fixação para prender a peça de trabalho no centro do prato giratório - Traçado de aperto / distância de aperto do parafuso de fixação 32 mm - Força de aperto pressionando / puxando 80 / 48,9 kN - Fio interno do cilindro de fixação M 27 x 40 - Controlo de posicionamento SIEMENS - Operação manual ou  ...

Sale from caldelabra/lamp post factory liquidation. Welding table 151x255 cm (general height 88 cm, max. height 105 cm) Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-12

Sale from caldelabra/lamp post factory liquidation. Welding table 151x255 cm. Custom made, cannot be disassembled. Unverified quality. Auction-ID: A7-49389-13

Equipped with grid holes in top and side beams, Ø 30 mm, top thickness approximately 20 mm. Auction-ID: A1-48474-209

Equipped with grid holes in top and side beams, Ø 15 mm, top thickness approximately 12 mm, including various clamps, stops, pins and clamping accessories. Auction-ID: A1-48474-258

Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-99

Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-106

top thickness approximately 50 mm. Including accessories, and accessories. Auction-ID: A1-48474-210

Table surface: 1100 x 550 mm, with vice (jaw width: approx. 135 mm), without accessories below Auction-ID: A7-48794-161

table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 124 bore: 28 mmweight: 326 kg4-283500consisting of:- 14x Professional screw clamp - nitrided -- 10x Professional screw clamp 45°/90° - nitrided- 8x Prism Ø 50 135° with screwed-in collar - nitrided- 36x Quick-clamping bolts without groove, double - burnished- 8x magnetic clamping bolts 68 - aluminum- 12x universal stop 150 L - nitrided- 12x universal stop 225 L - nitrided- 4x universal stop 500 S - nitrided- 12x stop and clamping bracket 175 L - nitrided- 2x stop and clamping bracket 300 G - nitrided- 2x stop and clamping bracket 500 G - nitrided- 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided- 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracketClamping bracket 750 G right - nitrided- 1x stop and clamping bracket 800 GK left - nitrided ...

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 392 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.553 kgProduct description:Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet.Welding table:- High-quality steel S355J2+N + plasma nitriding 200- Holes surface 100x100 mm grid- Corners, edges, and holes 45° chamfered- Holes side panel in diagonal grid- Construction reinforced by ribs- Includes basic foot equipment (working height 850 mm)Accessories:- 6 x professional nitrided screw clamps- 12 x quick-release bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping angle 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided- Allen key size 6- Brush Ø 30 with protective cap- CleanB ...

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding- Side panel holes in diagonal grid- Corners, edges and drill holes chamfered 45°- Construction reinforced with ribs- incl. basic foot equipment (working height 850 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 300 mmbore: 28 mmweight: 830 kg Special item – fair use Includes:Siegmund Sub Table BoxIncludes 2 drawers and 2 rubber matsLockable- Case-hardened tool steel X8.8 + plasma nitriding- Material thickness approx. 24.5–27 mm- Side panel made from high-quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Surface holes in a diagonal grid- Corners, edges and holes rounded- Side panel height 300 mm- Side panel holes: 3 rows spaced 50 mm apart, 2 rows spaced 100 mm apart- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise set-ups- Table base 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1075 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 bore: 28 mmweight: 51,2 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 913 kg280030.XD7D- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Holes surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines enable precise build-upsIncluding 4x feet basic equipment 650 item no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 150 mmbore: 22 mmweight: 395 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1100 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.