máquinas de soldagem usadas para venda (1,712)

Set 3: 77 pieces, 28mm system, consisting of:Clamps: 10 x 280610.NClamps: 6 x 280630.NPrism: 4 x 280648.1.NBolts: 24 x 160511Magnetic bolts 4 x 280740Stop: 8 x 280410.NFence: 8 x 280420.NAngle: 6 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280166.NAngle: 1 x 280167.Naccessory set. 1 x 283999Number 77 PositionsWeight 146 kgCondition newHole diameter 28 mm Auction-ID: A7-44764-204

Welding turntable with- foot switch- tilt/swivel by hand- speed infinitely adjustable- welding current transmission 250 AmpereTable diameter 450 mmTable load 300 KgSwivel range 90 degreesSpeed 0.2 - 2 infinitely variablerpm Table load 300 kg verticalTotal power requirement 220 kWMachine weight approx. 0.078 tSpace requirement approx. 0.66 x 0.45 x 0.48 m Condition: never used / new (5) Auction-ID: A7-44764-64

Stud welding machines 2 pcs.techn data see pictures Auction-ID: A7-44764-214

Roller block withload capacity 1000 kgWorkpiece diameter 20 - 800 mmDrum diameter 200 x 50 mmFeed rate 80 - 1600 mm/minTotal power requirement 0.23 kWDimensions 600x500x500mm Condition: never used / new (5) Auction-ID: A7-44764-62

10 pcs quick-clamping bolts for 28mm systemClamping range from 5 to 50mmNumber 10 pcs. Clamping range 15 - 50 mmHole diameter 28 mmWeight 10 kgDimensions L x W x H 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-44764-218

Basic set 1 / 24 piecesfor table top thickness 15 and 25mm4 pcs clamps clamping height 300mm, projection variable8 pcs clamping bolts2 pcs stop 100mm4 pcs stop 150mm2 pcs stop 225mm1 piece torch holder1 pc hole brush 30mm1 pc release lotion 500ml1 pc welding table cleaner on a natural, biological basis 500mlNumber 24 positionsWeight 22 kg Auction-ID: A7-44764-189

Welding table / hole table: with milled and deburred holesHole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.5mm to 1000mm. Table length 2990 mmTable width 1490 mmTable height 850 - 900 mmMachine weight approx. 0.8 t Auction-ID: A7-44764-117

Welding turntable with- foot switch- tilt/swivel by hand - speed infinitely adjustable - 250 amp welding current transmission - hole in face plate 40mm.Table diameter 350 mmTable load 100 KgSwivel range 90 degreesSpeed 0.2 - 2 infinitely variable rpmTable load 50 kg. verticalMachine weight approx. 0.055 tDimensions approx. 0.46 x 0.4 x 0.42 m Condition: never used / new (5) Auction-ID: A7-44764-101

Basic set 3: 69 pieces, 28mm system, consisting of:Clamps: 10 x 280604Bolts: 18 x 280511Fence: 10 x 280420.NBracket: 6 x 280110.GBracket: 4 x 280162.NThreaded bolts 8 x 280543stop 8 x 160415stop 4 x 284050Accessory set. 1 x 163999 Condition: never used / new (5) Auction-ID: A7-44764-180

WMT-Set 7: 70 pieces, 28mm system, consisting of:3x Pipe Screw Clamp D28 90° – Art.Nr. 40283973x Pipe Screw Clamp D28 180° – Art.Nr. 40283963x Pipe Screw Clamp D28 45° – Art.Nr. 40283983x Pipe Screw Clamp D28 300x150 – Art.Nr. 40283993x Pipe Screw Clamp D28 300x200 – Art.Nr. 402840015x Ball Lock Pin D28x50 – Art.Nr. 402766310x Stakeout Bolt D28x80 – Art.Nr. 40288764x Universal Stop D28 100x50x25 mm – Art.Nr. 40284694x Universal Stop D28 150x50x25 mm – Art.Nr. 40284704x Universal Stop D28 225x50x25 mm – Art.Nr. 40276572x Universal Stop D28 300x50x25 mm – Art.Nr 40276592x Stop Clamping Angle D28 75x50x75x25 mm – Art.Nr. 40286572x Stop Clamping Angle D28 175x50x75x25 mm 5 mm – Art.Nr. 40286582x stop clamping angle D28 175x50x175x25 mm – Art.Nr. 40286492x stop clamping angle D28 175x50x75x25 mm – Art.Nr. 40286522x stop clamping angle D28 175x50x175x25 mm –  ...

Mobile Welding Lifting Table / Hole Table:Hole diameter: 28mmHole spacing 100mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Ribbed underside for reinforcement. Table length 1200 mmTable width 800 mmHole diameter 28 mmTable height 450 - 800 mmLoad capacity 500 kgMachine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-44764-72

Welding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of deliveryTable length 2990 mmTable width 1490 mmTable height 850 - 900 mmMachine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-44764-96

Welding table \"SIGMUND Professional 750 + Plasma Nitrided\" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides.Incl. basic foot equipment. Pictured accessories optional. Table length 1200 mmTable width 800 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 0.35 tDimensions L x W x H 1.2 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-44764-8

Special set 102 pieces, 28mm systemincl. tool trolleyMaterial: burnished quality steelScope of delivery see picturesNumber 102 itemsWeight 320 kgCondition newHole diameter 28 mmDimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-44764-197

Welding table \"SIGMUND Professional 750 + Plasma Nitrided\" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides.Incl. basic foot equipment. Without accessories shown. Table length 2000 mmTable width 1000 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 0.75 tDimensions L x W x H 2.0 x 1.0 x 0.9 m Condition: never used / new (5) Auction-ID: A7-44764-17

Basic set 2: 51 pieces, 28mm system, consisting of:Clamps: 8 x 280604Bolts: 12 x 280511Fence: 8 x 280420.NAngle: 4 x 280110.GThreaded bolts 8 x 280543fence 8 x 160415fence 2 x 284050Accessory set. 1 x 163999 Condition: never used / new (5) Auction-ID: A7-44764-163

5 pcs screw clampsfor hole diameter 28mmprojection max. 245mmHandle made of aluminumsee pictures Condition: never used / new (5) Auction-ID: A7-44764-243

Siegmund Set 2, 57 pieces, 28mm system, consisting of:18x quick-release bolts with twist lock short, without O-rings 6x universal stop 150 L - Nitrided 6x universal stop 225 L - Nitrided 4x stop and clamping angle 175 L - Nitrided 2x stop and clamping angle 300 G left - Nitrided 2x stop and clamping angle 500 G left - Nitrided 4x prism Ø60-135° burnished - with collar complete with shovel collar and countersunk head 6x Professional Screw Clamp - Nitrided 4x Professional Screw Clamp 45°/90° - Nitrided 4x Magnetic Bolt Aluminium 1x Accessory Set (283999) consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Probe CleanBasic, Probe Non-Stick and Torch Holder. Condition: never used / new (5) Auction-ID: A7-44764-144

Scribing tablewith groove 22 x 22mmTable surface 1600 x 800mmTable height 890mmWeight 800Kgsee pictures Auction-ID: A7-44764-249

Welding table with accessories:- Table size: 2400x1200x200 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Bore Ø 28 mm- Holes surface 100x100 mm- Corners, edges and holes chamfered 45°- Height of sidewall 200 mm- Holes sidewall in diagonal grid- Construction reinforced by ribsAccessories:- 6x 280610.N screw clamp- 12x 280511 quick-release bolts- 8x 280420.N universal stop- 2x 280110.N stop and clamping angle- 2x 280162.N stop and clamping angle- 1x 283999 care set Table length 2400 mmTable width 1200 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 0.99 t Auction-ID: A7-44764-14

Auction-ID: A1-44739-20

Included: 3 m hosepackMethod: MIG/MAG welding (metal inert gas/metal active gas)Power: Adjustment range from 40 to 400 amps Duty cycle: 60% ED at 400 amps. Auction-ID: A1-44739-17

-Power consumption 12 kVA -Welding power source QINEO QINTRON 400 Pulse -Rotary table 1-axis integrated rotary table with clamping plate -Robotic arm 6-axis industrial robot (CLOOS-branded, probably KUKA base) - Safety enclosure Fully encased with safety window & suction nozzle -Teach Panel handheld control unit with CLOOS UI, clearly visible -Exterior trim Very good condition, minimal paint abrasion visible -Interior Clean, no visible abrasion or weld spatter -Robot arm Visually almost as good as new, without visible damage -QINTRON 400 Pulse welding machine (modern pulsed arc technology) – in good condition - Control unit Teach Panel intact & connected, no error messages visible -Turntable Mechanically stable, without visible wear Auction-ID: A1-44719-1

Welding current: 30 to 430 ampsMains voltage: 400 volts (3-phase) Duty cycle (ED): 40 % at 430 A, 60 % at 360 A, 100 % at 280 ADegree of protection: IP 23Insulation class: FIncluding: 3 m hosepack Auction-ID: A1-44739-19

Auction-ID: A1-44739-18

Variable rpm quick release plate foot pedal Auction-ID: A1-43823-15

Auction-ID: A1-43823-184

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.