Outras fresadoras (25)

Temos o prazer de oferecer à venda uma célula de fabrico completa de alta precisão, concebida para a produção de componentes longos, helicoidais e de perfil de parafuso, incluindo rotores de motores em PCP e lama, parafusos de extrusor e moldagem por injeção, fusos de compressor e bomba. O equipamento inclui: 1. 2008 LEISTRITZ PW190.8000.HP Descascamento / Rotação — Totalmente Operacional Capacidade: 120 mm (4,72") de diâmetro × 8.000 mm (315") de comprimento Peso da máquina: 92.594 lbs (42.000 kg) 2. 2011 LEISTRITZ LWN300 Moagem / Hobbing — Totalmente Operacional 3. 2009 LEISTRITZ PW300PM Moagem / Hobbing — Não em Serviço 4. WEINGÄRTNER FINAL 450 EM 2014 Acabamento / Polimento — Totalmente Operacional Este equipamento constitui uma rota de produção abrangente, abrangendo desbaste, maquinação de perfis, semi-acabamento e acabamento sup ...

Auction-ID: A1-50750-435

2x máquina de fresagem de duplo eixo Walther Em bom estado, totalmente funcional, pode ser visto e experimentado no local. Envio também para o estrangeiro. Visualização: Basicamente, gostaria de salientar que o artigo pode ser consultado e testado sob energia antes da compra, para excluir mal-entendidos. Por favor, faça perguntas antes de comprar para evitar confusões. Se tiver alguma dúvida geral ou quiser marcar uma visita para uma visita, pode ser contactado a qualquer momento através do número de telefone abaixo ou acima. Exceto erros na descrição e na venda anterior. O IVA é mostrado separadamente nas minhas faturas. Envio com agente de encaminhamento.

Equipped with: has a table of 1350 × 320 mm, a longitudinal travel of 700 mm, a transverse travel of 240/260 mm, a vertical travel of 370 mm, 18 spindle speeds of 31.5–1600 rpm, a main motor of 7.5 kW, a number 3 spindle cone, a spindle bore of 29 mm, a swivel range of ±45°, a maximum workpiece weight of 250 kg Auction-ID: A1-47365-10

Ano de Fabricação: 2015 Tipo de máquina: BC 1001 HS Horas totais de produção: 1608h Tempo total de espera: 5070h

Auction-ID: A1-50750-635

Fresadora TOS KURIM FRO 6, FRO8

Voltage: 220 V, Frequency: 50/60 Hz, Motor power: 0,75 kW, Motor speed: 2850 rpm, Max. machinable profile height: 90 mm, Max. machinable profile width: 120 mm, Arbor diameter: Ø30 mm, Max. blade width: Ø140 mm. Auction-ID: A1-50595-8

Pequena Máquina de Perfuração/Fresagem ISERT ELECTRONIC Curso X: 350 mm Curso Y: 300 mm Curso Z: 70 mm Rotação: 8000 / 9500 / 13500 / 20500 / 24000 RPM A máquina pode ser usada para perfurar placas de circuito impresso ou outro uso. A máquina era controlada através de um PC que já não está presente. Possibilidade de usá-lo em manual Equipado com: 1 Fresadora KRESS Tensão: 220 V mono Dimensões (L x W x H): 950 x 700 x 700 mm Peso: aprox. 60 KG

Power supply: 380V, 3 ph, 50 Hz, Total electrical power: 1.1 kW, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 15350 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 115 mm, Max. machinable profile width: 110 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-43

Jig chata/máquina de moagem HAUSER 3DR Viagem X: 400 mm Viagem Y: 200 mm Viagem Z: 400 mm Fuso: 2 velocidades Cone:CM2 Saída do fuso: 120 mm 2 gamas de velocidade 60-1500 RPM / 1500-3000 RPM Tamanho da mesa: L 590 mm x W 320 mm Variador de velocidade no fuso 2 avanços Descida automática: 0,03 mm/min - 0,06 mm/min X-eixo funcional com Mitutoyo conceber Eixo Y e Z: escala defeituosa Tensão: 380 V Largura: 1500 mm Profundidade: 1700 mm Altura em posição baixa: 1800 mm Peso: aprox.

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 0.75 kW, Copy router spindle motor: 0.75kW / 220 V / 3 ph / 50 Hz, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 14000 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 130 mm, Max. machinable profile width: 130 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-20

2 router cutters, each with an 8 mm cutting diameter and an 8 mm shank diameter, Motor power: 1,1 kW + 1,1 kW, Motor speed: 12000 rpm, Power supply: 380 Vac - 3 phases, Air consumption: 8 l/min. Auction-ID: A1-50595-30

Electrical supply: 220Vac/50Hz, Motor power: 0.85kW, Motor speed: 32000 rpm, Profile routing height: min. 40mm, max. 100mm, Cutter diameter: 8mm/5mm/80mm Auction-ID: A1-50595-5

Power supply: 380V, 3 ph, 50 Hz, Electrical power: 0,75 kW, Copy router spindle motor: 0,75 kW / 380 V / 3 ph / 50 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm, Copy routing capacity: x: 260mm / y: 105 mm / z: 90mm, Router cutter dimensions: Length: 80-120 mm / Diameter: Ø8mm. Auction-ID: A1-50595-15

General Description Horizontal milling machine, exported by Stankoimport. Designed for milling, slotting and general machining operations. The machine is equipped with a horizontal arbor spindle and supplied with installed milling tooling and a table-mounted clamping fixture. Technical Details Machine type: Horizontal milling machine Exporter: Stankoimport Horizontal arbor spindle T-slotted work table Multiple milling cutters mounted on the arbor Table-mounted clamping fixture included Manual X/Y/Z table feeds Mechanical feed gearbox with feed and spindle speed selectors Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and clamping fixture installed. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-24

General Description Horizontal milling machine designed for milling, slotting, gear cutting and general machining operations. The machine is equipped with a horizontal spindle and arbor carrying multiple slitting saws and side-and-face milling cutters, making it suitable for production and toolroom applications. Technical Details Machine type: Horizontal milling machine Horizontal spindle with arbor installed Multiple slitting saws and side-and-face cutters mounted on the arbor T-slotted work table Manual X/Y/Z table feeds Mechanical feed gearbox Feed and spindle speed selector dials Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and feed gearbox. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-23

Router / slot milling machine (Kopierfräse) designed specifically for processing aluminum and PVC profiles in window, door, and frame manufacturing. Slot Milling & Routing: It cuts lock cases, handle holes, cylinder slots, and water drainage slots into extruded metal or vinyl profiles. Copy Functionality: A stylus/tracer follows a template (copy plate) while guiding the overhead high-speed router cutter to replicate exact cutouts on the profile. Multi-Axis Tooling: Features a vertical copying router spindle on top and a horizontal slotting unit below for combined machining operations. Auction-ID: A7-50717-9

Mikron HSM 800 – High-speed machining centerbuilt in 2007 | Heidenhain iTNC 530 | 24,000 rpm |High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in mold making, graphite and electrode areas as well as for flexible series production. Travel distances of X 800 mm / Y 600 mm / Z 500 mm with a pallet size of 800 x 600 mm. Equipped with a 3-fold pallet changer for efficient production processes. The machine has a high-speed spindle with up to 24,000 rpm, HSK-A63 adapter and a 50-fold tool changer. Extensive equipment including IKZ high-pressure system (18–70 bar) with belt filter, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and measurement technology (M&H). Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and ...

Auction-ID: A1-50090-120

Edge milling machineon trolleysee picturesCondition: untested (6) Auction-ID: A7-50523-816

Auction-ID: A1-50090-121

Maximum 15 mm, diameter 400 mm Auction-ID: A1-50090-172

Table surface: 1.524 x 355 mm , Width of slots: 18 mm , Longitudinal travel of the table: 3 - 1016 mm/min. Fast traverse 2.400 mm/min , Transversal travel of the table: 3 - 1016 mm/min -Fast feed 2,400 mm/min, Distance between slots: 100 mm , Number of Slots T: 3, Longitudinal travel: 1.220 mm , Transversal Race: 508 mm , Vertical travel: 508 mm, Spindle cone: ISO 50 , Main engine power: 7,36 Kw, Voltage: 380/220 V, Included Accessories: Dimension display, faceplate axes, cutters, shims, cones, chucks