Perfuradoras de mesa (77)

: 40 mmthreading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mmspindle turning speed - stepless: 160 - 2250 U/minColumn diameter: 115 mmspindle stroke: 120 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 117/701 mmfeed: 0,10 + 0,20 mm/UMotor output: 1,45 / 1,9 kWheight of the machine: ca. 1840 mmweight of the machine ca.: 285 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25.0 / 30.0 mmthroat: 150 mmbore stroke: 120 mmthreading: M18 / M22 spindle taper: 3 MKtable:: 300 x 270 mmturning speeds: 200 - 4.000 U/mincolumn diameter: 100 mmtotal power requirement: 0.75 / 1.1 kWweight: 170 kgrange L-W-H: 800 x 500 x 1400 mm from a training workshop () New price approx. 4.700 eurosFurnishing:- robust bench drill with V-belt drive- Clamp / relax using a quick release lever- stepless speed adjustment- digital speed display- EMERGENCY OFF push button at the front- stable feed handle- stable quill for tool mounting- Thread cutting device- Right / left running of the work spindle- Pole changing motor- manual spindle feed- Height-adjustable work table, using a hand crank- adjustable drilling depth stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 830x320x1660 mmWeight: 56 kgTotal power requirement: 0,9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 570x870x1710 mmWeight: 143 kgTotal power requirement: 1,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mmthroat: 200 mmbore stroke: 105 mmtable surface area: 360x340 mmDistance spindle/table max.: 540 mmturning speed range - stepless: 120-3000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drilling diameter: 18 mindrilling capacity diameter max.: 15 mmbore depth: 90 mmthroat: 215 mmspindle: bis 360 mmspindle: 560 mmtable plate: 350 x 290 mmcolumn diameter: 75 mmTotal height: max. 1050 mmweight: ca. 100 kgspindle turning speed - stepless: 100 - 1800 U/minmotor speeds:: 700 / 1400 U/minPole-changing motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 180 mmquill stroke: 80 mmcontinious capacity: 20 spindle taper: MK 2 table-size: 280 x 245 mmheight of the machine: ca. 1000 mcolumn diameter: 73 mmdistance spindle /table: max. 425 mmdimensions: ca. 615 x 330 x 1015 mmweight: ca. 60 kgincl. vice HM Müller HT100PThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): / mmthroat: / mmbore stroke: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 13 mmthroat: 180 mmbore stroke: 70 mmmorse taper: 2 MKtable:: 230 x 220 mmturning speeds: 240 - 3800 U/minengine output: 0,59 kWcolumn diameter: 70 mmdimensions: 600 x 350 x 850 mmweight: 40 kg- Height adjustable and angle adjustable table- Movable work table- Prepared for cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mprecise bench drill:- Large speed range- Programmable thread cutting- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 14 /15 mmthroat: 180 mmbore stroke: 70 mmturning speeds: 420 - 2100 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 0,5/1,0 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mTable Drilling Machine with:variable feedTapping function.depth displayCoolant systemBelt-drivespindle protectionmachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mmthroat: 150 mmbore stroke: 90 mmturning speeds: 340 - 2200 U/min: 243 x 243 mmtotal power requirement: 0,5 kW / Voltweight of the machine ca.: 42 Kgdimensions: 400 x 450 x 900 mmTable drill- Digital speed display- Spindle protection- vice- drill replacement- Quick span feed (1 to 16 mm)- Tilt and rotating rider work table.- deep stop- tool set- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mmthroat: 180 mmbore stroke: 82 mmturning speeds: 220 - 2840 U/min: 290 x 290 mmtotal power requirement: 0,55/0,75 kW / Voltweight of the machine ca.: 54 Kgdimensions: 820 x 500 x 290 mmCE-tested spindle hood.Keyless chuck (1 to 16 mm)Tilting work table.Depth stop.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidade de furo em aço (diâmetro): 18 mmgarganta: 225 mmcurso furo: 110 mmtamanho da mesa: 430x345 mmvelocidade de giro do eixo - stepless: 135-4500 U/minpeso da máquina ca.: 0,7 tLeituradigital Toque acessórioMesa transversal 530x255mmAcessórios diversos

capacidade de furo em aço (diâmetro): 25 mmgarganta: 245 mmcurso furo: 120 mmpeso da máquina ca.: 1,35 tdimensões da máquina ca.: 1,6 x 1,5 x 2,4 m

capacidade do furo em aço (diâmetro): 18 mmgarganta: 225 mmcurso furo: 110 mmtamanho da mesa: 430x345 mmvelocidade de giro do eixo - stepless: 135-4500 U/minLeituradigital Toque de fixaçãoMesa transversal 530x255mmAcessórios diversos

bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mPrecise table drill:- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidade de furo em aço (diâmetro): 23 mmgarganta: 310 mmcurso furo: 150 mmvelocidades de giro: 90 - 2000 U/min: 420 x 360 mmrequisito de potência total: kW / Voltpeso da máquina ca.: 650 Kgdimensões: 1,2 x 0,8 x 2,4 mmFuradeira de bancada- Rotação esquerda/direita- Advance- Quadro de base

bore capacity in steel (diameter): 13 mmthroat: 235 mmbore stroke: 60 mmspindle taper: B 16 spindle turning speed - stepless: 100-3000 U/mintable surface area: 290x270 mmcolumn diameter: Ø 60 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidade de furo em aço (diâmetro): 20 mmgarganta: 276 mmcurso furo: 110 mmtamanho da mesa: 315 x 335 mmvelocidade de giro do eixo - stepless: 50-6300 U/minLeituradigital Fixação de toque Mesatransversal 530x255mmAcessórios diversos

capacidade do furo em aço (diâmetro): 18 mmgarganta: 225 mmcurso furo: 110 mmtamanho da mesa: 430x345 mmvelocidade de giro do eixo - stepless: 135-4500 U/minLeituradigital Toque de fixaçãoMesa transversal 530x255mmAcessórios diversos

capacidade do furo em aço (diâmetro): 4 / 6 mmvelocidades de giro: 650 - 12.000 U/minárea de superfície da tabela: 180 160 mmcone do eixo: B 10 curso furo: 50 mmNecessidade de potência total: ? kWpeso da máquina ca.: 50 kgdimensões da máquina ca.: - m

: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 240 mmbore stroke: 110 mmturning speeds: 125 - 2850 U/min: 310 x 320 mmdistance drilling head - clamping area: max. 650 mmtotal power requirement: 0,75 / 400 kW / Voltweight of the machine ca.: 0,175 tdimensions: 0,95x0,8x1,75 inkl. Tisch mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.