prensas usadas para venda (1,676)

Serial number: 055-007/12Operating voltage: 220 VFrequency: 50 HzNominal current: 45 AConnection: 12.5 kWControl voltage: 60 WPress force: 25 MpOperating pressure: 160 kp/cm³Speed: 200 mm/sSales: 450 mm/sPlunger stroke: 500 mmProjection: 360 mmMaximum distance between ram and table: 800 mmTable dimensions: 640 x 500 mm Auction-ID: A7-46287-167

Auction-ID: A1-46045-216

Slide size 650x450 mm Slide stroke 20-140 mm Strokes per minute 40-80 Max mould height 400 mm Worktop size 1000x660 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-7

Working capacity 103 mkg at speed 180 1/min, max. stroke 60 mm, stroke adjustment 6-60 mm Auction-ID: A1-46045-221

Slide size 1100x750 mm Slide stroke 200 mm Strokes per minute 10 - 50 Max mould height 570 mm Worktop size 1300x800 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-15

Slide size 385x350 mm Slide stroke 80 mm Max opening between table and slide 350 mm Worktop size 800x520 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-10

As good as new machine Operating hours in motion: 29.5 Hour meter: 2244 Strokes: 159328 incl. interchangeable decoiling device, strip straightener and Scrap ejection. Mains voltage: 3LNPE/400V/50Hz Control: Beckhoff/PNOZ multi Electrical wiring diagram: E$-M02070 Pre-fuse: 160 A Nominal power: 37 KW Nominal force: 2000 KN Working capacity: 16000 J Stroke rate in continuous stroke: 30-150 min-1 Max. stroke rate in single stroke: 30 min-1 Max. clutch cycles in single stroke: 20 per min Runtime: 0.158 s Min. safety distance: 317 mm Clutch pressure: 5.0 bar System pressure: 6.0 bar Stroke length: 20-220 mm Max. plunger adjustment: 150 mm Usual stopping point of the ram: OU Table dimensions: 1800x1100 Plunger dimension, max. tool dimension (WxD): 1800x1100 mm Max. weight tool top: 1700 kg Mass without additional equipment: 29000 kg Auction-ID: A1-46003-1

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 €: 1366.47 €: 40 to: 1250 mm: Y1 / Y2 / X und R Achse : 200 mm: 1050 mm: 250 mm: 440 mm: servomotorischer Spindela : 115 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 1950 mm: 1450 mm: 2650 mm: 3600 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...

Technical data Note: There was no original machine documentation. To the best of our knowledge, the technical data was partly read from the nameplate or identified on the basis of the machine. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1975 Machine Type: Eccentric Press / Stamping Press Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Mechanical press drive with flywheel Separate control cabinet Foot pedal Material storage / parts ejection Auction-ID: A7-46048-16

Technical data Note: There was no original machine documentation. To the best of our knowledge, all subsequent technical data were partly read from the nameplate and taken from publicly accessible sources. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1989 Machine Type: Eccentric Press / Stamping Press Press force: 250 kN Projection: 190 mm Plunger stroke: 20 mm Stroke rate: approx. 70 1/min Motor power: 1.5 kW Operating voltage: 380 V Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Hydraulic/Lubrication System Separate control cabinet Foot pedal Auction-ID: A7-46048-15

Slide size 850x600 mm Slide stroke 14-180 mm Strokes per minute 40 Min height between table and slide 500 mm Worktop size 1300x800 mm Revamping of the electrical system 2007 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-9

: neu : ca. 10 Wochen ab Auftrags : Italien : 66700 €: 1260.63 €: 50 to: 3.5 mm: 800 mm: 450 mm: 22 - 110 mm: 60 - 100 1/min: 70 mm: 8 : 70 mm: 235 mm: 290 mm: 5.5 kW: 1330 mm: 1000 mm: 2650 mm: 4500 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectordouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 €: 1631.07 €: 150 to: 300 mm: 950x650 mm: 1200x750 mm: 550 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3250 mm: 8200 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070179 : prompt, Zwischenverkauf v : Türkei : 19900 €: 382.08 €: 1 : 150 to: fix : 300 mm: 610 mm: 1020 mm: 9 mm/s: 5 mm/s: 10 mm/s: 600x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2470 mm: 2450 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 HAND CONTROL AND FOOT PEDALtable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 135000 €: 2551.5 €: 300 to: 500 mm: 3.000 x 2.050 mm: 700 mm: 20 mm/s: 2 mm/s: 3100 mm: 3000 mm: 2600 mm: 11500 kg: horizontal verschiebbar : 2050 mm: 1300 mm: 2000 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 €: 349.44 €: 100 to: fix : 1500 mm: 300 mm: 1520 mm: 680 mm: 10 mm/s: 5 mm/s: 6 mm: 500x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2275 mm: 2500 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand operating panelTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 €: 1474.2 €: 85 to: 500 mm: 900x600 mm: 600 mm: 105 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 2250 mm: 1150 mm: 2400 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 €: 1347.57 €: 60 to: 500 mm: 800x500 mm: 600 mm: 120 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1100 mm: 2350 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 89700 €: 1695.33 €: 85 to: 500 mm: 700x400 mm: 800x600 mm: 600 mm: 300 mm: 105 mm/s: 41 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 1200 mm: 1600 mm: 2500 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 88113 €: 1665.34 €: 220 to: 3050 mm: Y1 / Y2 / X Achse : 265 mm: 2600 mm: 450 mm: 530 mm: hydraulisch : 140 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 22 kW: 4250 mm: 1770 mm: 3000 mm: 12600 kgStandard accessories:3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning ta ...

Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-5

Extensive retrofit 2018/2019, approx. 500,000 € Connected load: 40kW. Air pressure required: 6 bar. Control modernization with the following scope: - Renew the control cabinet - Replace the main control panel - Replace the terminal boxes - Replace the servo drive of the C and Y axes - Modernize the feeder and the alignment station - And renew the wiring of the machine Expenses for the control system conversion: Electr. Circumference of punch 1. Punch 2 and Linear Automatic Control - PLC control Siemens S7 - Security technology and standard automation integrated into an overall system - Safety-related communication easily via standard fieldbuses - Simple and practical handling, thus high acceptance by the operating personnel - Effective, fast diagnostic functions, for maximum availability of machines and systems - NC sequence control Siemens SIMOTION - Servo drives Sinamics drive syst ...

Auction-ID: A1-46003-4

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1988 Serial Number: 119 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block Auction-ID: A7-46048-17

Rapid Toggle Press Auction-ID: A7-46048-82

DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4

Slide size 475x130 mm Slide stroke 100 mm Shots per minute 10-50 Max mould height 400 mm Worktop size 800x570 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-6

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1987 Serial Number: 100 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block Auction-ID: A7-46048-18

Rice spotting press Weight: 5000kg Auction-ID: A7-46048-138