prensas usadas para venda (1,822)

SLAVES mod- STP C 204 de 200 toneladas. - 4 metros

Prensa hidráulica 1500 toneladas. Folga entre os dois pistões laterais = 1400 mm. Folga entre verticais = 400 mm. Folga vertical entre placas abertas 3200 mm. Dimensões da mesa móvel = 1700 x 1800 mm. Tamanho fixo da mesa = 1500 x 2000 mm. Esta prensa tem sido usada para produzir garfos para empilhadeira.

Prensa de moldagem SMG HZPUX 350/200 - 1500/1300 usada em bom estado! Principais dados técnicos: - Potência: 510 tonelada - Vão máximo com castelo: 1460 mm - Luz mínima com castelo: 520 mm - Vão máximo sem castelo: 2160 mm - Luz mínima sem castelo: 1220 mm

PRESSÃO PARA PRODUÇÃO Bandejas de alumínio para uso alimentar completo com dupla impressão MOULD-1100 CC. COMPOSTO POR: A UNIDADE DE LUBRIFICAÇÃO UNIDADE DE MOLDAGEM DE 4 COLUNAS ToW-Scrap PAINEL DE CONTROLO. 55 TAC/MINUTO Dependendo dos moldes. COLUNAS DE PASSE PARA MOLDES ATÉ 800 MM

MÁQUINA DE PRENSA DE 40 TONELADAS

TRAVÃO HIDRÁULICO SIMPLES NC FORÇA NOMINAL: 3000 KN COMPRIMENTO DA MESA DE TRABALHO: 5000MM DISTÂNCIA DOS POSTES: 3800MM PROFUNDIDADE DA GARGANTA: 400MM CURSO: 300MM MÁXIMO ABERTO: 600MM POTÊNCIA: 45KW DIMENSÃO: 5000MM(L) X 2500MM(L) X 3200MM(L) LOCALIZAÇÃO: F39, TGE POR FAVOR, CONTACTE: syweetopglove.com.my

- CNC Crowning- Hydraulic tool clamping- EFL Easy form laser measuring & correction system- Set Tooling - Laser guide protection- Controlled axis Y1/Y2/X/R/V-Axis

- Adjustable sheet arms front side- Parking stattion sheet arms left side- WILA Crowning- Under power

- Hydraulic Clutch- CE-Safety 2e hand opperator system- Adjustable stroke / ram - Full set books / drawing / CE-Mark-  

- Table size 3500 x 2500 mm- Siemens Simatic OP7 controller- Max. work load 80 Ton- New price 1 Mil EUR- Working force up to 250 Bar- Power 30 kW

- Decoiler- Max. width 350 mm- Clamping area coil internal  mm- Coil diameter 1500 mm- Work load 1000 Kg - Straigtner- Width 250 mm- Roll diameter 30 mm- Number off rolls 21 units- Working speed 40 M/Min - Max. thickness 6 mm at 240 N/mm2- Max. Thickness 5 mm at 400 N/mm2

- Hydraulic clutch- CE-Safety 2e hand opperator system- Adjustable stroke / ram - Full set books / drawing / CE-Mark- Note in the Neck / Throath machine is repaired !- Only EUR 5500

- Table load sliding table 20000 Kg- Table load upper table 9000 Kg- Table out feed stroek 2100 mm- Column diamater 180 mm- Closing force 1500 Kn- Opening force 700 Kn- Laser safe CE Safety- Power 15 kW 

- C-Frame construction- Die height 850 mm- Thickness bolster plate 100 mm- Throath C Side 360 mm-  

- Pressure 0 - 250 Bar- T Size T-22- Opening force 35 Ton- Closing force 150 Ton- Distance between column 2130 mm- Table height over floor 770 mm- Upper table rotation 180 Grad

- CNC Crowning- Hydraulic tool clamping- EFL Easy form laser measuring & correction system- Set Tooling - Laser guide protection- Controlled axis Y1/Y2/X/R/V-Axis

- Cybelec 2D Controll system- 4 Axis controlled Y1 / y2 / X / Delta-R- 1 set universal tooling- Fiessler laser safe - Sheet support arms front side

The SAFAN H-Brake 120-3100 TS1 is a robust hydraulic press brake designed for consistent accuracy, high uptime and fast changeovers. With 120 tons of pressing force and 3100 mm bending length, this model delivers reliable performance for demanding production environments. As a used SAFAN H-Brake 120-3100 TS1 from 2005, this second hand machine combines proven SAFAN build quality with smart options that keep your shop productive.What this means for you- Capacity and flexibility. 120 T pressing force and 3100 mm bending length handle a wide range of parts in steel, stainless and aluminum.- Accuracy across the full length. Wila CNC Crowning and a throat depth of 400 mm help maintain consistent angles and reduce rework.- Fast setup. Wila New Standard hydraulic tool clamping speeds up tool changes and shortens lead times.- Controlled precision. Independent Y1 and Y2 with X, Z1, Z2 and central ...

- Minimum width 65 mm- Maximium width 185 mm- Load is 200 Metric Ton / Meter- Operation angle from 60 - 180 Gr- Die length 1000 mm and 500 mm sections

Segment radius top tooling for 1000 and 2000 Ton machineFull sets segmented on 835 mm and 10 sections to make 8000 mm- Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35- Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42- Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50- Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58- Radius 60 / Radius 62 / - Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80-   

- Only 100 Working (table/guiders/tooling still in prohibitor)- Installed never used in production only testing- CNC T1 + T2 + T3 Bending help support arm in front- 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1- Lower Tooling set Variable VLA 50-150 mm- Upper Tooling set LVD 505 - Adjustment V-Axis 59,3 to 249,3 mm- Thermotec Oil chiller GC25T-35 max. 2200 kPa- CADMAN TOUCH with the best software for pressbrakes - Hydraulic top tool clamping- Table width 500 mm- Troath in column 1000 mm

- Optional T1 bending support holders- Optional T2 bending support holders- Motorized Crowning over controlled- Lazer safe CE-Safety- Hydraulic tool clamping 

- Extra Heavy Duty Pressbrake- 1 set top tooling 88 Gr- 1 set lower dies- Cybelec DNC 1200- Y1,Y2,X,R1,R2,R3,R4,OWK- 4 fingers R1/R2/R3/R4 with 400 mm stroke- Crowning in lower blade 9 cylinders What kind off jobs built for:- Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs- Defence & Military; armored vehicle structures, reinforced structe hardox / strenx- Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners- Contruction and Fabrication; bridge giders, box columns, steel frames - On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts- Boiler an vessels; pressure vessels, power plant components, tower or pole section - Bending examples:35 mm thickness at 10 meter length26 mm thickness at 12 meter length20 mm thickness at 15 meter length   

The SAFAN H-Brake 120-3100 TS1 is a robust hydraulic press brake designed for consistent accuracy, high uptime and fast changeovers. With 120 tons of pressing force and 3100 mm bending length, this model delivers reliable performance for demanding production environments. As a used SAFAN H-Brake 120-3100 TS1 from 2005, this second hand machine combines proven SAFAN build quality with smart options that keep your shop productive.What this means for you- Capacity and flexibility. 120 T pressing force and 3100 mm bending length handle a wide range of parts in steel, stainless and aluminum.- Accuracy across the full length. Wila CNC Crowning and a throat depth of 400 mm help maintain consistent angles and reduce rework.- Fast setup. Wila New Standard hydraulic tool clamping speeds up tool changes and shortens lead times.- Controlled precision. Independent Y1 and Y2 with X, Z1, Z2 and central ...

- Closing force up to 18000 Kg- Opening force up to 15000 Kg- Driven table in & out feed- Upper table 270 Gr- Upper size 900 x 550 

Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction- Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal- Build in height 2950 mm- Maximum die height 1500 mm- Movable Table & Piston in X-Ways- Large package Die tooling radius 10/20/30/50/60/80/100 - Pressing force 210 kg/cm2- Maximum stroke 800 mm- Machine 2350 mm placed in ground 

- Rebuild in 2010 with SIEMENS TOUCH- Rebuild cost EUR 200.000- Distance measuring device with double taster- Big package with pressing tools in several diameters