Auction-ID: A7-45181-31

With manual hoist capacity: 250 kg Auction-ID: A7-45181-35

Manipulator weight: 53 Kg Maximum capacity: 40 kg Auction-ID: A7-45181-45

Hangs at height (can be disassembled yourself) Auction-ID: A1-44696-707

With drive motors 2 pieces; Tube cross-section 60x60 mm, guide groove width 15 mm, longest rail approx. 6000mm, including various round arches Auction-ID: A1-45447-30

Hoist designation: P 35 Lifting speed: 5 m/min FEM Group: 1Cm Load capacity: 5 t Rope/chain: 16 mm Y/W dimension 1: 111 mm Test book available The crane runways are not part of the auction Auction-ID: A1-45292-17

Defective slewing ring Auction-ID: A3-43506-202

Auction-ID: A3-43507-16753

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Ø Floor plate 1050mm, ø column 400mm, H column approx 485cm. Disassembled Auction-ID: A1-41275-20

With electric chain hoist, remote controlled, 10 steel columns, height approximately 9.500mm, travelling beam length approximately 27.500mm and power rail Auction-ID: A1-43459-26

Ø Floor plate 1050mm, ø column 400mm, H column approx 485cm. Disassembled. Auction-ID: A1-41275-19

Equipped with various clamps, not tested for operation. Auction-ID: A1-40132-116

Manitou MRT 2550 Privilege ST4 S2 – rotating telehandler Year of Make: 2019 | Operating hours: 1,260 | Condition: very well maintained (last service 12/2025) Key features: • Robust 360° rotating telehandler from Manitou's Premium series • Max. load capacity: 5,000 kg | Lifting height: 24.6 m | Range: approx. 21 m • Hydraulically telescopic boom with 4 sections • Controllable and mobile with remote control • Incl. fork carriage (quick coupler system) • Without winch – prepared for retrofitting • Joystick control & colour display with inclination sensors, load moment display, automatic stabiliser control • Four-wheel steering & all-wheel drive for maximum maneuverability • Hydraulically extendable front and rear outriggers • Cab with all-round visibility, heating, windshield wipers, roll-over protection • 12V connection, emergency stop ...

Auction-ID: A1-45239-2165

with polyp grabber Engine failure Auction-ID: A1-40132-1008

Chassis number: W09212200FEL65037, Equipped with engine power: ±100 kW (≈136 hp), Engine: Deutz-type diesel, Max. torque: ±570 Nm, Transmission: powershift, 3 forward / 3 reverse, Top speed: 40 km/h, Climbing ability: ±60%, Winch speed: ±100 m/min, Lifting force winch: ±27 kN, Swivel speed: ±2.5 rpm Outrigger base: ±5.6 x 5.6 m., hour reading not readable, Please note! Crane does not run. Electronic malfunction. Auction-ID: A1-40132-81

500kg capacity pillar jib crane, S/No 22486, Year 2011, with ABUS electric chain block and Carl Stahl lifting frames Auction-ID: A1-45187-177

Free-standing pillar jib crane, 500kg capacity, fitted with manual carriage and ABUS 500kg electric chain hoist, height under jib 3.5m, jib length approx. 3.5m, S/N 1157. Auction-ID: A1-45187-88

1 tonne capacity swing arm jib crane bolted to ground, fitted with ABUS 1000kg electric chain hoist and on manual carriage, including Carl Stahi 1000kg lifting frame, height under jib approx. 3.5m, Asset No 1358. Auction-ID: A1-45187-60

500kg capacity freestanding swing jib crane. Jib height 2.3m, jib length 2.8m. Bolted to ground. Fitted with ABUS GM 2500/4-2 electric chain hoist, 500kg capacity, S/No 220-028478, year 2006. Asset No ANR 2159. Jib S/No 19064. including lifting beam attachment Auction-ID: A1-45187-102

1 ton pillar jib crane, with Kone 1000kg electric chain block with pendulum control, S/No 2065, Year 1985, ANR 1081 Auction-ID: A1-45187-233

A deposit of €500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x CASELLA double girder overhead crane Capacity 5 TON Year 2015 Serial number A.0450.15 1x CASELLA single girder overhead crane Capacity 3.2 TON Year 2008 Span length about 17 meters With wireless remote control Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-17

Boom height 3 m without hoist Auction-ID: A1-44728-57

Capacity 500 kg, increment 100 g, never used Overall dimensions: 300 x 650 x 300 mm Weight: 5 kg Auction-ID: A7-44802-292

Capacity 500 kg, increment 100 g, never used Overall dimensions: 300 x 650 x 300 mm Weight: 5 kg Auction-ID: A7-44803-292

Capacity 500 kg, increment 100 g, never used Overall dimensions: 300 x 650 x 300 mm Weight: 5 kg Auction-ID: A7-44803-207

Capacity 500 kg, increment 100 g, never used Overall dimensions: 300 x 650 x 300 mm Weight: 5 kg Auction-ID: A7-44802-207