máquinas de bebidas usadas para venda (2,022)

Single-stage homogeniser, used for hop suspensions with a particle size of 1 µm. Integration into a higher-level control system is possible via signal exchange. The motor was controlled via an external FI., Additional title: high pressure homogenizing, Capacity range approx.: 1800 l/h, Pressure: 250 bar, Cellular particle size: 1 μm cellular particle, Length: ca. 2,2 m, Width: ca. 2,5 m, Height: ca. 1,9 m, Operation / Control: Integrated in a ProLeit process control, the motor was controlled by an external frequency converter., Features: CIP-able, SIP-able

Horizontal pressure tanks on transport frame with fork guides, equipped with outlet pipe with manual valve, pressure gauges and sight glasses. Two of the tanks are equipped with cooling jackets., Additional title: Horizontal stainless steel tanks; years of manufacture: 1992-2000, Gross volume: 1000 l, Max. overpressure (2 pcs.): 3 bar test pressure: 3,9 bar, Max. overpressure (1 pc.): 2 bar, Material: Stainless steel, Position: Horizontal, Base construction: On stainless steel frame with fork guidances, Features: Outlet pipe DN50, sight glasses, pressure gauge

System for the pressureless production of aqueous chlorine dioxide solution This system enables the pressureless production of an aqueous chlorine dioxide solution. The two starting materials are fed into a reaction vessel one after the other via peristaltic pumps. The liquid level in the vessel is monitored by a level probe, ensuring a correct mixing ratio of 1:1. The operating time of the peristaltic pumps is also monitored and controlled by the software to ensure precise dosing. After the reaction time, the resulting chlorine dioxide solution is rinsed with water in the storage tank and then dosed to the point of use using a diaphragm dosing pump and a dosing valve. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Water treatment - chlorination, Capacity: 18 g/h ClO2, Dosage volume: 9 l/h against 7 bar, ...

Stainless steel lauter tun with various fittings., Additional title: stainless steel brew vessel, Total volume: 30000 l, Area approx.: 15 m², Specific false bottom load: 165 kg/m², Frame height: 2 m, Material: Stainless steel, Features: Outlet vent bracket, entrance dome (DN600), inspection glas (DN600), CIP warning light, door safety switch, interior lighting set (IP54)

Insulated whirlpool for outdoor installation., Additional title: Trub removal, Capacity: 18200 l, Volume net: 15000 l , Height wort: 1700 mm , Height cylinder: 2000 mm, Material: Stainless steel 1.4301 (AISI 304), Position: outdoor, Base construction: cylindrical vessel, Features: insulation (100 mm mineral wool)

Additional title: y. o. c.: mostly 2003, Finished wort: 15000 l , Grist: 2500 kg, Current: three-phase A.C. current, Voltage: 400 V, Frequency: 50 Hz, Features: lauter tun, low pressure cooking wort copper-whirlpool system with external wort boiling system, additional whirlpool, trub collecting unit, hop dosage , Periphery: lauter wort heater, vapor condenser

This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: puffer tank, Capacity: 178 hl, Working pressure: 4 bar, Length: 4,8 m, Width: 2,4 m, Height: 3 m, Weight: 2000 kg, Position: horizontal, Features: DN80 , Periphery: After consultation, we can equip the tank with the desired ...

This coding machine from Videojet Technologies GmbH is a powerful thermal transfer printer designed for reliable and precise product marking in packaging lines. With a capacity of up to 150 packages per minute, it is ideal for high-speed production environments. The machine is operated via the intuitive CLARiTY control system with a single monitor, ensuring simple and user-friendly handling. The device is mounted on a height-adjustable mobile carrier with feet and wheels, allowing it to be flexibly integrated into existing lines. Thanks to its modern design and robust construction, this machine offers a reliable and efficient solution for printing data, batch numbers, and product information. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Thermal transfer printer, Capacity: 150 packs/min , Current: 1,86 - 3,85 A, Voltage: 100 - 240 V, Frequency: 50 ...

Capacity: 18000 bottles/h closing heads: 24 pieces, Power: approx. 5 kW, Water: approx. 200 l/h, Compressed air: approx. 2 cbm/h, Length: 3,3 m, Width: 2,2 m, Height: 2,4 m, Weight: 3000 kg, Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm, Running direction: right - left, Material: Stainless steel, wear-resistant plastic, Base construction: miniaturized, hygienic machine table in outward beveled design, Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station, without control cabinet

Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm

plate filter, 60 x 60 cm with 142 plates, manual pressing., Number of plates: 142, Length: 3,6 m, Width: 0,8 m, Height: 1 m, Weight: 2000 kg

This used crate washing machine from Klann GmbH is a robust and efficient solution for cleaning beverage crates with a capacity of up to 1,000 crates per hour. The machine has 50 adjustable flat jet nozzles that ensure thorough and reliable cleaning results. With a circulation capacity of approx. 300 hl/h at 5 bar, this device offers powerful cleaning performance combined with efficient operation. Thanks to its compact design, it can be easily integrated into existing production lines. A solid and cost-effective choice for breweries and beverage manufacturers looking for a proven solution for crate cleaning. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: box spraying, Capacity: 1000 crates/h, Circulating capacity approx.: 300 hl/h at approx. 5 bar, Compressed air: approx. 2,2 m³/h, Length: approx. 3,80 m, Width: approx. 1,1 m, Height: approx. 1,4  ...

A complete - with a production capacity of approx. brew is for sale. The brewhouse comprises a mash tun, mash kettle, lauter tun, and wort kettle. The system was modernized and rebuilt several times between 1990 and 2001, resulting in a combination of traditional copper construction and modernized stainless steel components. The brewing vessels are robust and efficient in design: the mash tun and lauter tun are made of copper, and the wort kettle also has a copper core with stainless steel inner lining and an integrated inner boiler. The mash tun is made of stainless steel (1977). The equipment also includes a pan vapor condenser, wort cooling, plate cooler, and peripherals such as a spindle station, wort pumps, drain pump, and hot water tank. The CIP system allows for convenient cleaning of the wort kettle, including two 20 hl containers for lye and acid; the remaining vessels can ...

Overview This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HB ...

Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup

Overview  This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data  Capacity: 20 hL gross / 18–19 hL net Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool Max. mash load: 600 kg Average efficiency: 83% Average lautering time: 2 hours Heating system: Double steam jacket (lateral + bottom, independent) Max. pressure: 3 bar Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperat ...

Filtrox ZHF PVPP filter comprising: - Filter vessel - PVPP batch dosing tank - CIP station for regeneration - Control panel for system integration - All pumps, valves and field devices - Control cabinet with operator panel, Additional title: Filtrox ZHF, Filter capacity: 200 hl/h, Volume: 16 hl, Operating pressure: 6 bar, Operating temperature: 100 °C, Systemic volume: 1620 Liter, Width: 1,2 m, Height: 2,85 m, Weight: 2500 kg, Operation / Control: Manual system, mainly with pneumatic valves, operation take splace on the control cabinet panel, Material: stainless steel, Features: Filter vessel with horizontal filter elements, stack dosing container with agitator, CIP system for regeneration, control cabinet with control panel, pumps, fittings and sensors

Vertical stainless steel pressure tanks, Additional title: Vertical stainless steel pressure tanks, Capacity: 44070 l, Max. working overpressure: 3 bar, Length: 3100 mm, Width: 3100 mm, Height: 6300 mm, Material: stainless steel 1.4541 (AISI 321), Position: vertical

Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting an ...

- – (manufacturer Kern) The 2-roll mill from (built in 2018) is ideal for dry grinding barley malt. The rollers can be precisely adjusted via . . and are driven by a . via a V-belt. The mill stands on a sturdy tubular frame and is equipped with a feed hopper, protective grille, bagging spout, and bag buckle. In addition, the machine is supplied with a plate scale from the manufacturer Kern, which offers a weighing range of up to 150 kg and has a readability of 20 g (bottom) and 50 g (top). With compact dimensions of 1250 mm in length, 1750 mm in width, and 1670 mm in height, as well as a weight of 124 kg, this mill is ideal for small to medium-sized breweries or laboratory applications. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 2-roller mill for dry milling, Capacity: 600 kg/h, Adjustable cracking clearance: 0.2 to 4.5 m ...

These - from () stand on four legs and offer a for fermentation and storage under controlled conditions. With a . and operating temperatures up to 50°C, they are extremely versatile. The tanks feature frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap, and temperature control. The 50 mm thick, chloride-free PU insulation and robust AISI 304 stainless steel ensure durability and hygienic, temperature-stable use. Ideal for breweries, beverage manufacturers, and industrial processes that require gentle storage under controlled cooling and pressure. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 5 ...

Horizontal stainless steel pressure tanks with cooling jackets, sight glasses, outlet pipes and pressure gauges., Additional title: horizontal, coolable stainless steel pressure tanks, Volume: 1050 l, Max. working overpressure: 3 bar, Length: 2300 mm, Width: 860 mm, Height: 860 mm, Material: stainless steel, Position: horizontal, Features: cooling jacket, outlet pipe DN50, sight glasses, pressure gauge

Overview This cold glue labelling machine was manufactured in 2010 by the Italian company Kosme S.r.l. The model Extrafix 504/6 SC2 E3 is designed for labelling of glass beer bottles using cold glue technology. The machine was in production until January 2025, is now stored and ready for shipment, and remains in good operational condition. Technical data  Capacity: 6,000 bottles per hour Formats: 0.33 L (long-neck bottles) Neck finish: 26 mm crown cork Label Type: Cold glue (paper labels) Status: Stored, ready for shipment Condition: Previously in production until January 2025

2 horizontal stainless steel pressure tanks, each equipped with cooling coil and sight glasses. The tanks come with a frame for installation., Additional title: horizontal, coolable stainless steel pressure tanks, Volume vessel: 1200 l, Volume cooling coil: 4 l, Max. overpressure: 3 bar, Max. working temperature: 30 °C, Length: 2700 mm, Width: 900 mm, Height: 900 mm, Material: stainless steel 1.4301 (AISI 304), Position: horizontal, Base construction: each on saddle frame, Features: cooling coil, sight glasses

Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling un ...

Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fe ...

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty cont ...

Manufacturer: Arnold Holstein Consisting of: Packing press type H65: Capacity: 1,200 kg/h Efficiency up to 75% 24 press inserts (65 x 65 cm) 22 pressing cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Fruit conveyor Pasteurizer Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing machine Profi Capacity: 600 l/h including weighing unit bags with up to 10 l, Additional title: Juice bottling incl. fruit reception and processing, Capacity pasteurizing/filling: 600 l/h, Capacity press: 1200 kg/h, Power: 1,5 kW / 48 kW, Features: Fruit conveyor with water bath / shower and shredder, packing press type H65 - 1,200 kg/h, efficiency 75%, 22 pressing cloths, 2.33 x 0.84 x 2.06 m; pasteurizer Profi PA SH - 600 l/h, 48 kW, 2.1 x 0.88 x 1.3m; gas burner; automatic dosing unit - 600 l/h, incl. weighing u ...