máquinas de bebidas usadas para venda (2,148)

two-component nozzle with sight glass for a wort cooling capacity of approx.130 hl/h completely assembled on stainless steel panel, Additional title: Dual-fluid nozzle for oxygenation of wort, Aeration at a wort cooling capacity of: 13000 l/h, Base construction: mounted on stainless steel panel, Features: air vent DN50, sterile air filter, air flow meter, pressure reducer, membrane valves, control cabinet

Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings, Additional title: 3-tank system with heating elements, aeration devices and temperature control, Volume and dimension per tank: 2000 l Diameter 1300 mm, cylindrical height 1500 mm, total height 2100 mm, Length: 4500 mm, Width: 1700 mm, Height: 2100 mm, Operation / Control: electrical box with buttons, switches and temperature controls, Material: stainless steel, Position: free standing, Base construction: standing tanks with lids, on pipe feet, Features: electric heating rods, temperature sensor, stand hose for content display, automatic gassing, ladder bracket, internal piping, control box

Wet spent grain conveyor - Housing with rectangular inlet chute - Wet spent grain bunker mounted at the inlet - Flushing water discharge connection - Mounted gear motor - Non-return flap with air connection, pressure gauge and ball access hatch., Additional title: Wet spent grain conveyor, Capacity approx.: 200 kg/min, Power: 4 kW, Current: 6,98 A, Voltage: 400 V, Frequency: 50 Hz, Material: Stainless steel 1.4301, Features: Spent grain bunker; non-return valve with compressed air connection, manometer and ball access hatch

Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve, Additional title: Refrigerated stainless steel tanks for outdoor installation, Capacity: 74480 l, Operating pressure: 0,9 bar, Width: 12,55 m, Height: 3,27 m, Material: Stainless steel, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system., Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce, Volume: 33000 l per tank, Max. pressure: 2 bar, Pump capacity: 28 m³/h, Operating temperature: 40 °C, Length: 2600 mm, Width: 2600 mm, Height: 8500 mm, Weight: 3900 kg, Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool, Material: stainless steel 1.4301, Position: free standing, Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps, Features: 2 zone frame cooling, ...

PVPP filter - Filtrox CHF with: - Filter vessel - PVPP batch dosing vessel - CIP station for regeneration - Swing bend panel for system integration - all pumps, fittings and field instruments - Control cabinet with control panel, Additional title: Centrifugal horizontal filter, Filter capacity: 20000 l/h, Volume: 1620 l, Operating pressure: 6 bar, Operating temperature: 100 °C, Systemic volume: 1620 Liter, Width: 1,2 m, Height: 2,85 m, Weight: 2500 kg, Operation / Control: Manual system, mainly with pneumatic valves, operation take splace on the control cabinet panel, Material: stainless steel, Features: Filter vessel with horizontal filter elements, stack dosing container with agitator, CIP system for regeneration, control cabinet with control panel, pumps, fittings and sensors

Manufacturer: Arnold Holstein Consisting of: Packing press type H65: Capacity: 1,200 kg/h Efficiency up to 75% 24 press inserts (65 x 65 cm) 22 pressing cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Fruit conveyor Pasteurizer Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing machine Profi Capacity: 600 l/h including weighing unit bags with up to 10 l, Additional title: Juice bottling incl. fruit reception and processing, Capacity pasteurizing/filling: 600 l/h, Capacity press: 1200 kg/h, Power: 1,5 kW / 48 kW, Features: Fruit conveyor with water bath / shower and shredder, packing press type H65 - 1,200 kg/h, efficiency 75%, 22 pressing cloths, 2.33 x 0.84 x 2.06 m; pasteurizer Profi PA SH - 600 l/h, 48 kW, 2.1 x 0.88 x 1.3m; gas burner; automatic dosing unit - 600 l/h, incl. weighing u ...

consisting of: - Malt milll - Mash-/Wortkettle/Whirlpool - Lauter tun - Warmwater vessel - Wort cooler - Wort aeration - Siemens touch screen - 4 x Fermenting vessel - 8 x Storage tanks with shell cooling surface - Icewater vessel - mobile beer pump - Steam boiler - 2 Bottle-filler + 1 Can-filler by Fillmatic - bottle filler A. Gruber, Additional title: 5 hl-Brewery, with Grist Mill, Compact-Brewhouse, Fermenting vats, Storage tanks, Cast out wort: 500 l, Capacity wort cooler: 750 l/h, Wort cooling time: 40 min., Material: Brewing vessel, hotwater tank, fermenting and storage tanks in stainless steel, 1.4301, Base construction: Brewhouse compact unit on stainless steel frame, vertical Fermenting vats on feet, horizontal storage tanks on two layer in a stainless steel frame., Features: mobile grist mill, mash-/wortkettle, lauter tun, warm water tank, wort-cooling and aeration, 4 fermentin ...

The fully-automated carbonisation plant produces the CO2-amount of beer, beer mixing beverages, soft drinks, mineral water and wine in a continuous and high-precision way by precise controlled dosing of CO2., Capacity beer feed: 20000 l/h, Capacity degassed water: 10000 l/h, Capacity blended beer: 30000 l/h , CO2-supply: 8 barg, Power: 23 kW, Current: 50 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, Length: 2790 mm, Width: 1250 mm, Height: 2440 mm, Weight: 500 kg, Operation / Control: fully automatic, electrical cabinet with control panel, Material: stainless steel, Features: Flange connection: Beer: DN80, degassed water: DN40, CO2: DN25, blended beer: DN65 Beer pump; carbonisation section; flow measurement; Anton Paar original wort, alcohol and CO2 measurement; pressure gauge; sampling taps; various other valves

5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control brewmaxx V7 and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is Outdoor-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood., Additional title: Modern brewhouse made of stainless steel, copper-clad, Cast wort capacity: 25000 l, Operation / Control: Fully automatic with brewmaxx V7 process control system, Material: Stainless steel brewho ...

Can filling machine with single filling valve, mobile, on wheels. For semi-automatic filling of 5 liter cans with beer. Capacity: approx. 30 - 35 cans/h, Additional title: Filling machine for liquid foodstuffs into large containers, Capacity approx.: 50 cans/h, Height: 2,0 m, Formats: 5 liter cans, Operation / Control: semiautomatic, Material: stainless steel, Base construction: on wheels

Self-priming centrifugal pump with stainless steel housing., Additional title: self-priming centrifugal pump, Frequency: 1450 1/min, Power: 4,0 kW, Material: stainless steel, Features: stainless steel housing

Open vessel on feet, with central outlet and lid with hinge., Additional title: Open stainless steel tank, Volume approx.: 1400 l, Length: 1,2 m, Width: 1,2 m, Height: 1,9 m, Material: stainless steel, Position: standing on feet, Base construction: cylindrical vessel, Features: central outlet

Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole., Additional title: coolable tank, Volume: 21798 l, Working pressure: 0,1 bar, Width: 2,95 m, Height: 4,2 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Features: flat conical bottom, side wall and cone cooling zone, central outlet DN50, manhole

Yeast vessel on wheels, with flat conical bottom, side as well as center outlet, side wall cooling zone and lid., Additional title: mobile, coolable vessel, Volume approx.: 2000 l, Width: 1,35 m, Height: 1,7 m, Weight: 150 kg, Material: stainless steel, Position: vertical, Features: wheels, flat conical bottom, lateral as well as central outlet, side wall cooling zone, lid

Yeast tank on feet, with flat bottom, side outlet, side wall and bottom cooling zone and lid., Additional title: coolable vessel, Volume: 893 l, Width: 1,14 m, Height: 1,34 m, Weight: 250 kg, Material: stainless steel, Position: vertical, Features: feet, lateral outlet, side wall and bottom cooling zone, lid

Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, A conversion and automation was carried out by Esau & Huber in 2007., 2 tanks for yeast propagation each: 80 hl total volume, 2 tanks for yeast storage each: 80 hl total volume, Material: stainless steel, Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration

Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated., Additional title: coolable, insulated, clad, Gross content: 1122 l, Perm. working overpressure: 3 bar, Perm. working temperature: 20 °C, Content cooling zone: 5 l, Length: 1000 mm, Width: 1000 mm, Height: 1700 mm, Material: stainless steel, Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet

Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers., Additional title: combination filter, Capacity: 12000 l/h, Plate size: 100 cm edge length, Length: 7000 mm, Width: 1500 mm, Height: 1500 mm, Position: horizontal, Base construction: mounted on steel frame, standing on feet, Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

This beer drive delivery station is designed for efficient liquid transfer in breweries and beverage factories. The device is mounted on a frame with integrated forklift pockets to ensure easy mobility and handling. It features a pump, an inductive flow meter, a control cabinet with a totalizer and two toggle switches, and a 20 m long DN40 hose (hose replacement recommended) with a hose reel. Other features include a pneumatically controlled flap valve, a compressed air connection, and three manual flap valve connections, making it a versatile and practical solution for controlled beverage dispensing. Our team at VBW Asset Trade will be happy to answer your questions., Hose: 20 m DN40, Length: 2,2 m, Width: 1,2 m, Height: 1,62 m, Base construction: mounted on rack with forklift shoes integrated, Features: pump, inductive flow meter, control cabinet with summation counter and two flip sw ...

Fermentation cellar with 4 coolable stainless steel tanks. Tank 1-3: C. Gresser, 1986, gross volume 204.60 hl. Tanks standing on 4 legs, each with 2 frame cooling zones, dished bottoms and central outlet. Equipment in each case: safety valve, cleaning line, CIP spray head, sampling tap, manhole in the frame and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 115.69 hl. Tank standing on 4 legs with frame cooling, dished bottom and outlet pipe. Equipment: Cleaning line, CIP spray head, sampling tap, manhole in the frame., Additional title: coolable stainless steel tanks, 3 tanks each: 20500 l, 1 tank each: 11600 l, Material: stainless steel, Position: free standing, Base construction: Vertical cylindrical tanks on square tube feet, Features: Cooling jackets, cleaning lines, CIP spray heads, discharge lines, safety valves, sampling taps, manholes, sight glasses

Beer storage cellar, comprising 8 upright pressure tanks with cooling jackets and temperature control., Additional title: Vertical, coolable stainless steel pressure tanks, Width: ca. 2,50 m, Height: ca. 2,60 m, Features: 8 storage tanks (6x approx. 165 hl, 2 x approx. 175 hl), temperature control, paneel, blending apparatus

A vertical stainless steel tank with multiple cooling zones and various fittings. Most recently used as a fermentation tank for beer., Additional title: Coolable tank, Capacity approx.: 11600 l, Width: approx. 2,3 m, Height: approx. 4,1 m, Material: Stainless steel, Position: vertical, Base construction: on 4 feets, Features: manhole; cooling jackets; spunging apparatus; sampling valve

Vertical stainless steel tanks with multiple cooling zones and various fittings. Most recently used as fermentation tanks for beer., Additional title: Vertical, coolable stainless steel tanks, Capacity: 20500 l , Operating pressure: 0,3 bar, Width: approx. 2,80 m, Height: approx. 4,20 m, Material: Stainless steel, Position: Vertical, Base construction: on feet, Features: manhole; cooling jackets; spunging apparatus; sampling valve

Kieselgur mixing station comprising two vertical stainless steel mixing tanks, each fitted with a top-entry agitator and a central outlet., Additional title: Kieselgur mixing station comprising two vertical stainless steel mixing tanks, Capacity: 1300 l/vessel, Features: 2 stainles steel vessels with agitator, and podest, incl. fittings

Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water., Additional title: coolable stainless steel pressure tanks, Volume per tank: 32400 l, Cooling surface/tank: 25 m², Perm. working overpressure: 3 bar, Systemic volume: 324 hl, Length: 2,5 m, Width: 2,5 m, Height: 7,4 m, Weight: 2585 kg, Material: stainless steel AISI 304, Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve , Periphery: Inlet and outlet pipework via double-seat valves

Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 5 tanks, also available individually or in partial quantities., Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Stainless steel tank with two dished heads and a central outlet, fitted with a level gauge, a cleaning pipe and a manhole., Additional title: Vertical stainless steel tank, Volume: 18500 l, Width: 2,9 m, Height: 3,25 m, Weight: 1300 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, level indicator, CIP-pipe, manhole