máquinas de bebidas usadas para venda (2,148)

Equipment: Heatable/coolable,Condition: used,Volume: 72,500,Design: horizontal,Stand shape: feet,Number of feet: 12,Heating/cooling (filter bar): available,Temperature control cylinder: rectangular half-tube coil,Diameter inside: 2,800,Cylindrical length: 12000,Total length: 13,100,Type plate: No,Equipment: Spray head,Remarks: 6 reinforcement rings Fe with 2 feet each (Attention: note tank diameter lower than tank feet when setting up) Manhole in the front floor,last Intended use: Brewery,Material in contact with the product: V2A 1.4301 (AISI304),Material temperature control system: V2A 1.4301

Condition: brand new,Volume: 105,000,Specific gravity of the medium: 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: standing,Stand shape: flat bottom,Number of feet: 4,Diameter inside: 3,342,Cylindrical height: 12,000,Total height: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, disc valve,Outlet: DN80 DIN 11851 ,Remarks: Pictures shown are of an identical tank with a slightly smaller volume, material in contact with the product: V2A 1.4301

Manufacturer: Schwarz Apparate- und Behälterbau,Condition: used,Volume: 4,000,Lower bottom: flat bottom,Top bottom: screwed lid with hinged segment,Design: upright,Diameter inside: 1,590,Cylindrical height: 2,000,Total height: 2,200,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 1.5,Type plate: Yes,Outlet: available,Outlet : 48,Note: slight adhesions,Remarks: Tanks slightly out of round Spout is deeper than tank bottom (note when setting up) Sheet metal cut-outs in the lid Type plate only available for 2 tanks 1 tank with ball valve (see

Condition: factory new,Volume: 105,000,Specific gravity of the medium: 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: upright,Diameter outside: 3,342,Cylindrical height: 12,000,Total height: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/vent, disc valve,Outlet: DN80 DIN 11851 ,Remarks: Pictures shown are of an identical tank with slightly smaller volume,material in contact with the product: V4A 1.4401/04 (AISI316),material feet:

Equipment: Overpressure,Manufacturer: DINO Steam Generator,Condition: Used,Volume: 110,Max. Overpressure: 3.0,Design: Hanging,Shape: Frame,Diameter inside: 400,Cylindrical height: 820,Total height: 1,150,Year of construction: 2020,Manhole / dome: in the top floor (DN 400),Type plate: Yes,Remarks: Principle drawing available Frame made of V2A,Last purpose: Autoclave for sterile masks,Material in contact with the product: V4A 1.4401/04 (AISI316),Bottom bearing: No,Current interferer: No,Bottom bearing: No, Power Interferer: No

Equipment: Overpressure,Manufacturer: eurocont,Condition: used,Volume: 1.000,Max. overpressure: 2.0,Max. permissible Operating temperature : 130,Design: Container,Stand shape: Frame,Number of feet: 4,Diameter inside: 1,000,Cylindrical height: 965,Total height: 1,850,Wall thickness underbody: 2.5,Wall thickness cylinder: 2,Wall thickness upper floor: 2,Technical documents: Drawing,Type plate: Yes,Equipment: Disc,Outlet: DN50 DIN 11851 ,Remarks: Hand hole DN 100 in the top floor (occasionally the union nut is missing) Partly small dents possible,Last use: Food,Material

Equipment: Insulation, Overpressure,Manufacturer: Thyssen Umformtechnik (UCON),Condition: used,Volume: 1,000,Max. overpressure: 2.00,Design: Container,Stand shape: Frame,Insulation: available,Insulation material: PU foam,Material insulating jacket: galvanized steel,Diameter inside: 1,100,Total width: 1,200,Total length: 1,200,Technical documents: TÜV papers,Manhole / dome: in the topsoil (DN 400),Type plate: No,Outlet: 76,Note: slight adhesions, pressure points on the Insulating sheath, traces of use, remarks: partly slight differences in the design Total height 1800 - 1960 mm

Equipment: overpressure, vacuum,Manufacturer: Wilhelm Schmidt,Condition: used,Volume: 3,Vacuum: 1.0,Max. overpressure: 5.0,Design: upright,Standing shape: Stand frame,Diameter inside: 140,Total height: 260,Technical documents: Drawing,Type plate: No,Outlet: not available,Remarks: Opening in the top floor Diameter of pipe inside approx. 28 mm Pressure-resistant closures for this opening are not available (could be purchased by you from the manufacturer) Since the containers were supplied by the previous operator were operated without pressure, pressureless caps were used there (see photos)

Equipment: Insulation, Overpressure,Condition: used,Volume: 3.600,Max. overpressure: 2.6,Max. permissible Operating temperature : 20,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Insulation: available,Insulating sheath: hermetically welded,Insulation material: PU foam,Material insulating sheath: stainless steel,Insulation thickness: 50,Diameter inside: 1,400,Diameter outside: 1,500,Cylindrical height: 2,000,Total height: 3,400,Wall thickness floors: 4,Wall thickness cylinder: 3,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Spray head,

Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 2.470,Max. overpressure: 3.0,Design: standing,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 1.300,Cylindrical height: 1.500,Total height: 2.450,Wall thickness shelves: 3.8,Wall thickness cylinder: 4.5,Year of construction: 2015,Technical documents: Drawing, acceptance certificate, CE marking and declaration of conformity,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: disc, Spray head, outlet: DN32 DIN 11851, last purpose: brewery, material in contact with the product: V2A 1.4301

Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 3,000,Max. overpressure: 2.0,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 1,390,Cylindrical height: 1,500,Total height: 2,500,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: disc,Outlet: DN50 DIN 11851 ,Note: slight adhesions,Remarks: Manhole Dimensions: approx. 300 x 395 mm (the manhole cover is missing),last use: Brewery,Surface exterior: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Current interferer:

Equipment: Overpressure,Manufacturer: Coelho,Condition: used,Volume: 3,660,Max. overpressure: 3,00,Max. permissible Operating temperature : 85,Bottom floor: Cone bottom,Design: upright,Stand shape: Feet,Number of feet: 3,Diameter inside: 1,600,Cylindrical height: 1,500,Total height: 3,850,Wall thickness underbody: 5.1,Wall thickness cylinder: 6.1,Wall thickness upper floor: 5.6,Manhole / dome: Hand hole,Type plate: Yes,Equipment: Crane eyelets,Outlet : 60,Note: slight adhesions,Remarks: Cone height approx. 800 mm 1 hand hole diameter 350 mm in the top floor 1 small bump in one of the feet (see photos), last

Equipment: Overpressure,Manufacturer: Martin Rosa KG,Condition: used,Volume: 6,200,Max. overpressure: 8.0,Design: lying,Base: feet,Number of feet: 4,Diameter inside: 1,600,Cylindrical length: 2470,Overall height: 1,900,Total length: 3,400,Wall thickness shelves: 4,Wall thickness cylinders: 4,Type plate: Yes,Outlet: DN65 DIN 11851 ,Note: slight adhesions,Remarks: 1 manhole approx. 320 x 420 mm in the front floor (one container is missing the manhole cover) with 1 tank the nameplate is missing Front floor outside marbled foot ends partially shortened, total height may vary slightly, last

Equipment: Insulation, Overpressure,Manufacturer: ABAB General Tank and Apparatus Construction,Condition: Used,Volume: 10,000,Max. Overpressure: 5.00,Max. permissible Operating temperature : 20,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Insulation: available,Insulating sheath: hermetically welded,Material insulating sheath: Stainless steel,Diameter inside: 1,800,Diameter outside: 2,000,Cylindrical height: 4,000,Total height: 5,200,Wall thickness floors: 7,Wall thickness cylinder: 5,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Level indicator

A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible.

Warehouse Service  for Used Machines  Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers  Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers  Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics ef ...

O aplicador de pegas Mariani INOX foi desenvolvido para a aplicação automática de alças de transporte em pacotes múltiplos de bebidas ou recipientes para garrafas. A máquina trabalha em linha dentro da linha de produção, garantindo um posicionamento preciso e fiável das pegas a altas velocidades de produção. Fabricante: Mariani Aplicador de Pega Modelo INOX Ano 2005 Condição Utilizada Número de stock 103823 Tipo PLC 6ES7 214 SIEMENS Voltagem: 400V Frequência 50 Hz

Complete bottle forming, filling and packing line for 1,5 liter sterilized milk with blowers, filler, capper, sterilization towers, palletizers etc. The line is already dismantled and boxed in crates., General:, Size of the bottles: 1,5 liter milk bottle with stopper (cap), Bottle dimensions: width 93,9 mm, height 282 mm, Weight bottle: 44 gram, weight aluminium 0,4 gram and weight cap 4 gram, Material of the bottle / Compesition: PE (Polyethylene), Neck diameter of the bottle: 46,7 mm, Bottle closed with a aluminum and easy peelable cover, Capacity of the line: 7.000 bottles per hour, Product: Whole cow’s milk, which has been treated with a heating process in such conditions of temperature and time able to ensure the destruction of microorganisms and the inactivity of their resistance forms., Closed bottle shelf life: 6 months since the date of manufacture, Opened bottle: maximum thre ...

​Complete aseptic line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005, has been operating since 2006 and will run till Q3 of 2026. The line includes processing area (mixer, pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper., General:, Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap), Material of the bottle / Compesition: PET, Bottle closed with a snap cap, Capacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/h, Product: Ice tea (softdrink), Scope of Supply:, 1. Mixing plant, Manufacturer: Tetra Pak, Model/type: Alblend 10 2S FB, Year of m ...

Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5

À venda há uma pequena linha completa de enchimento para vinagre ou óleo em garrafas de plástico. Atualmente, a linha está a 0,75 litros. e tem uma produção máxima de 4.000 garrafas/h. Toda a fábrica é composta pelas máquinas listadas abaixo: 1. Bunker para garrafas de plástico vazias, cerca de 6m de comprimento, capacidade: cerca de 400-600 recipientes 2. Sistema de triagem de garrafas Kamman tipo K23F A máquina garante que as garrafas a encher são transportadas verticalmente para fora da máquina, com a boca virada para cima Capacidade de triagem: aprox. 3.000-6.000 peças/h 3. Esteiras transportadoras 4. Enchimento a vácuo Leicht, modelo Cobert tipo Olimpia20/95 Com 20 postos de abastecimento Dimensões: LxLxH: 1.520x1.250x2.330 mm Diâmetro possível da garrafa: 55-120 mm Construído em 1989 6. Codificador de jato de tinta, make REA-JET, para ...

Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 5,1kW Two lanes Additional information conveyor for packages available

Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)

Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details Semi-automatic new glass pusher with interchangeable gripper units 4 heads: adjustable depending on the layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER

Parker AKM 60