máquinas de soldagem usadas para venda (1,729)

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 843 kgSpecifications- High-quality S355J2+N steel + plasma nitriding- Material thickness approx. 24.5–27 mm- Hole diameter 28 mm- Holes in 100×100 mm grid pattern- Rounded corners, edges and holes- Side panel height 200 mm- Hole spacing on side panel: 50 mm- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise set-ups- Special equipment for welding tables is available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 42 kVAcontact pressure capacity: 600 kpweight of the machine ca.: 170 kgdimensions: 1200 x 900 x 1350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 544 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 521 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- Extreme plasma ...

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 300 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 cells, no welding machine Auction-ID: A7-49229-67

Equipped with grid holes in top and side beams, Ø 15 mm, top thickness approximately 12 mm, including various clamps, stops, pins and clamping accessories. Auction-ID: A1-48474-258

Auction-ID: A7-49229-44

Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-99

Auction-ID: A7-48398-19

Auction-ID: A1-48474-72

Auction-ID: A7-49229-45

Auction-ID: A7-49229-46

Equipped with grid holes in top and side beams, Ø 30 mm, including various clamps, stops, pins and clamping accessories Auction-ID: A1-48474-106

Two-station Auction-ID: A7-49229-65

Technical details Type: Resistance butt welding machine Configuration: - Water-cooled copper welding electrodes - Heavy-duty welding transformer - Analog current and milliamp meters - Welding current adjustment controls - Foot-operated control - Fume extraction hood - Mechanical workpiece clamping system Application: - Butt welding of rods - Wire joining - Strip welding - Profile welding - Industrial metal fabrication Construction: - Heavy-duty industrial steel cabinet - Resistance welding technology - Water-cooled electrode arms Dimensions: - Length: Approx. 1200 mm - Width: Approx. 900 mm - Height: Approx. 1800 mm Weight: Approx. 700 kg Condition: Used Observed condition: - Cabinet appears complete - Copper welding jaws installed - Analog control instruments present - Cooling hoses connected - Heavy dust accumulation visible - Long-term storage indications present - Operational status  ...

Auction-ID: A1-48474-74

incl. two welding robots from the manufacturer CLOOSwith different welding equipmenttwo QIROX control unitsone CLOOS QR-CTU-50-09 pipe welding deviceLoad: 5000 NTorque: 1000 NmTipping torque: 2400 NmDimensional moment of inertia: 150 kg/m²Power: 2.8 kWLoad: 10,000 NFour CLOOS welding machinesType: GLC 603with two tandem burning systems on the left and a single torch on the left and two tandem torches on the right and a single torch on the rightIn addition, two welding fume extraction systems from the manufacturer STAUFFER, type: DB-50 2 Rwith a turning system, type: CLOOS QR-CTU-50-09in portal designPortal length: approx. 14,000 mmWelding torch holder with connection flange, tandem torch ZMW-640 A-31, robot welding torch for tandem weldingincl. torch cleaning unit CMR 6 T SRRobot peripherals: workpiece positioning with vertical rotational movement, vertical stroke Load: 30 kNRotation ra ...

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-49208-334

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-49208-271

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low spark formation, high duty cycle Auction-ID: A7-49208-286

Input Voltage: 230V~50Hz Welding Current Range: 20-330A No-load Voltage: 60V Maximum Current Draw: 55A Effective Current Draw: 45A Duty Cycle: 40% 330A, 100% 202A Electrode Size: 1.6-4.0mm Auction-ID: A7-49208-92

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-49208-71