prensas usadas para venda (1,707)

Slide size 385x350 mm Slide stroke 80 mm Max opening between table and slide 350 mm Worktop size 800x520 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-10

Technical data Note: There was no original machine documentation. To the best of our knowledge, the technical data was partly read from the nameplate or identified on the basis of the machine. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1975 Machine Type: Eccentric Press / Stamping Press Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Mechanical press drive with flywheel Separate control cabinet Foot pedal Material storage / parts ejection Auction-ID: A7-46048-16

Technical data Note: There was no original machine documentation. To the best of our knowledge, all subsequent technical data were partly read from the nameplate and taken from publicly accessible sources. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1989 Machine Type: Eccentric Press / Stamping Press Press force: 250 kN Projection: 190 mm Plunger stroke: 20 mm Stroke rate: approx. 70 1/min Motor power: 1.5 kW Operating voltage: 380 V Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Hydraulic/Lubrication System Separate control cabinet Foot pedal Auction-ID: A7-46048-15

Slide size 850x600 mm Slide stroke 14-180 mm Strokes per minute 40 Min height between table and slide 500 mm Worktop size 1300x800 mm Revamping of the electrical system 2007 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-9

: neu : ca. 10 Wochen ab Auftrags : Italien : 66700 €: 1260.63 €: 50 to: 3.5 mm: 800 mm: 450 mm: 22 - 110 mm: 60 - 100 1/min: 70 mm: 8 : 70 mm: 235 mm: 290 mm: 5.5 kW: 1330 mm: 1000 mm: 2650 mm: 4500 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectordouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of LogoTech ...

: neu : ca. 4 Monate ab Auftragse : Italien : 135000 €: 2551.5 €: 300 to: 500 mm: 3.000 x 2.050 mm: 700 mm: 20 mm/s: 2 mm/s: 3100 mm: 3000 mm: 2600 mm: 11500 kg: horizontal verschiebbar : 2050 mm: 1300 mm: 2000 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17

: neu : ca. 4 Monate ab Auftragse : Italien : 89700 €: 1695.33 €: 85 to: 500 mm: 700x400 mm: 800x600 mm: 600 mm: 300 mm: 105 mm/s: 41 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 1200 mm: 1600 mm: 2500 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-5

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1988 Serial Number: 119 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block Auction-ID: A7-46048-17

Rapid Toggle Press Auction-ID: A7-46048-82

DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4

Slide size 475x130 mm Slide stroke 100 mm Shots per minute 10-50 Max mould height 400 mm Worktop size 800x570 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-6

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1987 Serial Number: 100 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block Auction-ID: A7-46048-18

Rice spotting press Weight: 5000kg Auction-ID: A7-46048-138

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 €: 2504.25 €: 200 to: 500 mm: 1250x1000 mm: 600 mm: 25 mm/s: 3,5 mm/s: 7.5 kW: 1550 mm: 1300 mm: 2700 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of  ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 14400 €: 276.48 €: 70 to: horizontal verschiebbar : 350 mm: 900 mm: 1050 mm: max. 9 mm/s: 2 kW: 1950 mm: 1000 mm: 2250 mm: 1220 kg: 650 mmThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31400 €: 599.74 €: 100 to: 500 mm: 800x600 mm: 615 mm: 26 mm/s: 4 mm/s: 4 kW: 1600 mm: 900 mm: 2300 mm: 3100 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 €: 825.12 €: 150 to: 500 mm: 800x600 mm: 630 mm: 22 mm/s: 3 mm/s: 4 kW: 1800 mm: 1200 mm: 2400 mm: 4500 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 €: 1510.11 €: 130 to: 1000 mm: 640 mm: 210 mm: 5 - 110 mm: 60 1/min: 630x400 mm: 90 mm: 330 mm: 11 kW: 2200 mm: 1372 mm: 3000 mm: 8200 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-45737-200

: neu : ca. 10 Wochen ab Auftrags : Italien : 101500 €: 1918.35 €: 100 to: 5 mm: 1000 mm: 630 mm: 180 mm: 15 - 140 mm: 45 - 70 1/min: 8 : 90 mm: 320 mm: 570 mm: 11 kW: 1320 mm: 2200 mm: 3080 mm: 10000 kg8-fold ram guidefixed tablesemi-automatic stroke adjustmentmotorized ram adjustmentVariable speed motorhydraulic overload protectiondynamic brakingplatenautomatic circulation lubricationsafety light guard Keyenceuser manual in GERMAN or ENGLISHAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- Press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of  ...

Auction-ID: A1-45737-162

Auction-ID: A1-45737-14

: neu : 2024 : 7308 : prompt, Zwischenverkauf v : Italien : 2400 €: 1 : 10 to: fix : 150 mm: 850 mm: 520 mm: 170 kgWith handpump with 2 speedsAccording to CE regulationsUser manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg Auction-ID: A1-45737-140

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-45737-199

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 76820 €: 1451.9 €: 160 to: 4050 mm: Y1 / Y2 und X Achse : 200 mm: 3600 mm: 300 mm: 430 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 620 mm: 250 mm/s: 858 mm: 104 mm: 15 kW: 4850 mm: 1900 mm: 2610 mm: 10500 kg3 axes (Y1, Y2, and X axis)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC crowning tableintermediate clamps for upper toolupper tool1010/A/75°/0,8, sectioned,bending radius hardened a ...

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 49500 €: 945.45 €: 150 to: fix : 835 mm: 500 mm: 700 mm: 1050 mm: 20 mm/s: 10 mm/s: 3 mm/s: 1000x700 mm: 1000x400 mm: 2200 mm: 1000 mm: 2700 mm: 4100 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 30900 €: 590.19 €: 200 to: horizontal verschiebbar : 300 mm: 1900 mm: 320x210 mm: 5 mm/s: 20 mm/s: 2460 mm: 1600 mm: 2700 mm: 4800 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo shows mod. HDK 1570/150)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.