desbastadoras usadas para venda (532)

Auction-ID: A7-45983-16

\"Conveyor belt length 3300 mm Transport burn width: 240 mm Working height: 850 mm Length of the bevel surface: 1000 mm \" Auction-ID: A7-45983-68

\"Planing width: 240 mm Planing height: 120 mm Accessories: 6 toothed rollers, 4 rubber rollers, 6 planer heads Incl. 6 flexible suction hoses\" Spindle Arrangement: U-R-L-O-U-O On Pallet Auction-ID: A7-45983-3

\"Planing width: 200 mm Planing height: 100 mm Accessories: 6 toothed rollers, 2 rubber rollers, 4 planing heads Incl. 4 flexible suction hoses Spindle Arrangement: U-R-L-O On Pallet Auction-ID: A7-45983-5

Auction-ID: A1-41993-81

Auction-ID: A1-41993-82

Number of boring spindles: 4 St.Working width: 230 mmWorking height: 160 mmFeed motor: 11 kWFeed speed: 60 m/min.Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of timber including infeed mechanization Weinig High Mech E 1.The machine has a Memory Plus system with electronic positioning (radial) of the spindles 3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 7 St.Working width: 220 mmWorking height: 120 mmtotal power requirement: 42 kwFeed motor: 7,5 kWPlaning and moulder Weinig type Unimat 22 E for four-sided planing and profiling of timber incl. shuttering protection cabin, suction pipes and planing heads.Two driven rollers in the table.The machine is function-tested, dismantled and ready for loading.Spindle 1: Bottom / 5.5 kW / 40 mmSpindle 2: Right / 4 kW / 40 mmSpindle 3: Left / 6.5 kW / 40 mmSpindle 4: Right / 5.5 kW / 40 mmSpindle 5: Top / 4 kW / 40 mmSpindle 6: Bottom / 4 kW / 40 mmSpindle 7: Top / 5.5 kW / 40 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Planing and moulding machine with splitting unit Weinig Hydromat 1000 Spindle Assembly No. 002 Electronic feed 6-60 m/min. Technical data Working width (for tool flight circle 140 mm) 80-150 mm Working height (with tool flight circle 163 mm) 23-65 mm Finished slat widths4-15 mm Max. number of slats 16 pieces Slat lengths 400-4000 mm 6 spindles Auction-ID: A7-45928-2

planing width: 30-260 mmplaning height: 10-200 mmnumber of spindles: 6 Weight: 6650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2.000 mmFeed motor: kWPlaning and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads.Including dismantling and loading. Fixed loading date: 15.06.2026.Spindle 1: BottomSpindle 2: RightSpindle 3: LeftSpindle 4: TopSpindle 5: BottomThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-30 m/min.Weinig Powermat 500, year of manufacture 2010, window version-------------------------------------------------------technica l details short summary:--------------------------------------------------------- 6 spindles, 5 of which are PowerLock- 8,000 rpm- Large PowerCom control system- Spindles 2, 3, and 4 axially CNC-controlled- Spindles 2, 3, 4, and 5 radially CNC-controlled- Window package for glazing bead removal:Pneumatic indexing of right and top spindles for bead removalSee attached PDF document for detailed descriptionOptions with additional costs:--------------------------------------------------------- Existing planing and molding tools by Leitz (price on request!)- Maweg Saturn Duo single-slot wood sander, manufactured in 1985, in a pro ...

Number of knives: Z2 V2 width: 17 mmcircle diameter: 160 mmmaterial: Stahl : WP Bore diameter: 40 mmJointing rebate cutter Weinig type 530 160 01 / 2 08 for use on the planing spindle of Weinig planing machines.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 230 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 5,5 kWFeed speed: 7-36 m/min.uper SWT 23 XL-6 Four-Sided Planer-----------------------------------------------Machine fully functional tested!... Working width min/max: 18 - 230 mmWorking height min/max: 8 - 150 mmSpindle configuration:1st Spindle - bottom-----------------------------------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 240 mmPulley diameter: 160 mmAdjustment: axial and radial, manual2nd Spindle - right------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 160 mmPulley diameter: min. 110 mm - max. 200 mmAdjustment: axial and radial, manual, via mechanical digital displayAdjustment: vertical 35 mm below Table3rd Spindle - Left------------------Power: 7.5 kWSpeed: 6,200 r ...

Number of boring spindles: 4 St.Working width: 230 mmWorking height: 160 mmFeed motor: 11 kWFeed speed: 60 m/min.Control: Memory Plus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 7 St.Working width: 260 mmWorking height: 160 mmLength of the planing table: 2.500 mmFeed motor: 4 kWFeed speed: 30 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmfeed: 5-25 m/minDimensions (L/W/H): 4700/1800/1100 mmweight: ca. 4.000 kgCASOLIN MEGA 230/6 four-side planer------------------------------------------6 spindles, with touchscreen control.Width and height controlled.Spindle arrangement:1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with3rd spindle: left, 40 mm diameter, 6,000 rpm4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kWMachine without machining tools.The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system).Machine already dismantled and stored.(technical information according to the manufactu ...

planing width: 405 mmtotal power requirement: 15 kWWeight: 1900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

planing width: 610 mmtotal power requirement: 19,5 kWWeight: 2500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1100x1160 mmWeight: 950 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 5 St.Working width: 20-230 mmWorking height: 8-160 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 1000-1600 mmworking width: 40-150 mmThickness: 10-80 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 6 St.Working width: 20-230 mmWorking height: 8-160 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feed motor: 5,5 kWtotal power requirement: 58,3 kwweight of the machine ca.: 4000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 180 mmFeed motor: 3 kWweight of the machine ca.: 2750 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mmWorking height: 240 mmMotor output: 5,5 kWNumber of knives: 4 St.Feed speed: 6 - 18 m/min.Dimensions (L/W/H): 1.250 x 1.050 x 805 mmweight of the machine ca.: 825 kg: Tersa turning speeds: 4.500 U/mintable-size: 630 x 1.000 mm: elektrisch - manuell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St.Working width: 240 mmWorking height: 120 mmDimensions (L/W/H): 4900 x 1700 x 1700 mmweight of the machine ca.: 3500 kgControl: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts14 axis control with touch screen - WINDOW VERSIONMachine with 6 spindlesSpindle speed 8,300 rpmWorking width 240 mm, working height 120 mmElectronic horizontal and vertical positioning of the spindlesGlazing bead cuttingTouchscreen controlsDetailed technical description, seeadjacent PDF documents.Suction nozzle diameter:1. Spindle down: 120mm2nd spindle right: 120 mm3. Left spindle: 120 mm4. Spindle top: 150mm5. Spindle top: 150mm6. Spindle below: 120mmOption: workpiece return to the operatorImages are from our archive of a machine of the same model.(Technical information according to the manufacturer - without guarantee!)The data for this ad was created with Mod ...

Number of spindles: 4 St.Working width: 15 - 230 mmWorking height: 10 - 125 mmFeed speed: 6 - 24 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 4 St.Working width: 180 mmWorking height: 120 mmFeed speed: ca. 10 m/min m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 2 St.Working width: 180 mmWorking height: 120 mmLength of the planing table: 2100 mmFeed motor: 3,7 kWFeed speed: m/min.total power requirement: kwDimensions (L/W/H): mmweight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.