outras máquinas para trabalhar madeira usadas para venda (1,403)

Edge banding machine Type: Akron 1130 J Manufacturer: Biesse Year: 2020 Panel height: 8-50 mm Minimum part length: 150 mm Minimum part width: 85 mm Feed speed: 9 m/min Front separation spray Pre-milling unit Infrared lamp EVA adhesive roller application Pressure rollers Capping unit Milling unit equipped with nesting copier Rounding unit Radius filter Surface filter Cleaning fluid spray Polishing discs LCD display for switching on the units, including clear statistics on peeled meters and number of parts Counter: 63000 m Machine in good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: KAM6ALL+ Manufacturer: Holzmann Year: 2023 Min. workpiece length: 100 mm Min. workpiece width: 100 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Edge thickness: 0.4 - 3.0 mm Air pressure: 6-8 bar Machine weight: 1260 kg In very good condition, fully functional, under power Find more here - / Contact us at -

Panel saw Tyoe: FKS400V32PRO Manufacturer: Holzmann Year: 2023 Table height: 890 mm Formatting table: 3200x435 mm Boom: 1200x550 mm Suction: 1x Ø 100 / 1x Ø 80 mm Max. width of cut with longitudinal ruler 1300 mm Main saw blade (/hole): 250-400 (/30) RPM of saw blade: (I):3000 (I):4000 (III):5000 rpm Diameter of pre-cutting disc (/hole) Ø120 x 20 x 3.2-4.2/2.2 mm Power of the pre-cut motor: 750 W Pre-cut speed: 8000 rpm Turning the saw blade: 0-45° Dimensions:4760 x 5010 x 1700 mm Machine weight: 1044 kg In very good condition, fully functional, under power Find more here - / Contact us at -

- Centrifugal viruter mill with knife ring for the manufacture of flat chips. - Main motor power 315 KW. - Power of the hydraulic power plant 2.60 KW. - Rotor rotation speed 1107 rpm. - Rotor diameter 1393 mm. - Number of blades: 54. - Blade length 690 mm. - Maximum production up to approx. 20000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-9

- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-14

- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 25 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-7

- Oscillating screen with 2 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of fine chips used in the outer layers of chipboard, equipped with 10x10 mm - 2.20 - 2.28 - 0.21 meshes. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-12

- Updated in 2002. - Total installed electrical power approx. 200 KW. - Capacity 10000 kg/h (atro) - Water evaporation 9700 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 520 °C. - Gas outlet temperature 130 °C. - Chip output temperature approx. 60 °C (at ambient temperature 10 °C). - Total thermal energy consumption approx. 8,670,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator. • Fuel oil burner: maximum consumption 600 kg/h. • Dust burner. • Mixing chamber. • Rotary drum dryer: diameter approx. 4000 mm, length approx. 12000 mm. • 4 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: un ...

- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 22 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-6

- Oscillating screen with 3 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of chips used in the inner layer of chipboard, equipped with 10x10 mm - 2.20 - 0.36 - powder meshes. - Total installed power 15 KW. - 2 chip inlets with a diameter of 650 mm. - 3 + 3 sieve planes with a total sieving area of 78 m². - Chip outlets: 3 with a diameter of 650 mm and one with a diameter of 500 mm. - Longitudinal distance between supports 3730 mm. - Transverse distance between supports 3940 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accr ...

- Updated in 2002. - Total installed electrical power approx. 180 KW. - Capacity 8500 kg/h (atro) - Water evaporation 8500 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 550 °C. - Gas outlet temperature 120 °C. - Total thermal energy consumption approx. 7,800,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator. • Fuel oil burner: maximum consumption 600 kg/h. • Dust burner. • Mixing chamber. • Rotary drum dryer: diameter approx. 3600 mm, length approx. 11000 mm. • 2 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal a ...

Manufacturer: Mohringer Type of Machine : Automatic Edging Saw Upgrades and Refurbishment - 1993 -- New Mohringer centring and infeed table installed - 2019 -- Full factory overhaul carried out at Mohringer works - 2022 -- New optimisation and control system installed (SDE) Find more here - / Contact us at -

Panel saw Type: K 700 S Manufacturer: Felder Year: 2018 Machine in good condition, fully functional, under power Find more here - / Contact us at -

tube diameter: 300 mmlength: 1.170 mmwidth: 380 mmheight: 820 mmAs good as new block separator or block trap for sorting out wooden blocks in extraction systems.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 55- 170 mmwork piece width: max. 28 mmworkpiece height: max. 27,5 mmmilling motor: 2 cut-off saw: 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces.Work sequence:1. feeding the material from the magazine2. cutting (sawing) to the desired length3. milling of the cut workpieces4. ejection of the finished part.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Type: G 200 Manufacturer: Felder Year: 2007 Edge thickness: 0.4 – 2 mm Part thickness: 10 – 45 mm Min. part length: 250 mm Min. part width: 90 mm Feed: 5 – 5.5 m/min Moulding speed: 9000 rpm Moulding diameter: 70 mm Glue temperature: 20 – 210 °C Glue container capacity: 1.2 kg Weight: 310 kg Including suction Copy wheels from a newer model Currently after service Machine in good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: G 360 Manufacturer: Felder Year: 2022 Edge thickness: 0.4 – 5 mm Part thickness: 10 – 45 mm Min. part length: 210 mm Min. part width: 70 mm Feed speed: 8 m/min Total power: 5,5 kW Weight: 450 kg Machine length: 2300 mm Equipment: pre-milling unit trimming unit lamp for preheating edged material glue melting tank removable glue tray radius cidliny flat cidliny Machine in very good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: O KDF 220 C Manufacturer: Brandt Year: 2016 Pre-milling unit Adhesive unit Miter saw Milling unit Corner rounding unit Cleaning units Pre-mills recently replaced, serviced + spare tub for overhaul Machine in good condition, fully functional, under power Find more here - / Contact us at -

- Manufacturer: Homag - Type: CNC machining center incl. vacuum tube lifter JUMBO ERGO 85 - Model: Profi BOF311/40/21/R - Year of manufacture : 2012 - Dimensions: 9,830 x 7,420 x 3,000 mm (length x width x height) - Condition: very good, regular annual maintenance by a licensed Homag partner - Special feature: Inkjet printer instead of a label printer - Milling unit 7.5/12kW - Maximum speed n: 24,000 min⁻¹ - Drill head: individually controllable, quick-change chuck - 9 vertical spindles - 2x 2 horizontal spindles - Tool magazine - 12-position changer - Securing the work area with a safety mat divided into three zones - CE certification (DE, EN & RO) available - Language package: German, English, Romanian - Software: - WoodWOP 8 - New machine computer in July 2022 including upgrade of machine operating system Find more here - / Contact us at -

service station for processing PUR glue Type: EDGETEQ XES 200 Manufacturer: Homag Year: 2021 2 vacuum containers for application units, Electronic temperature control Mobile station on wheels Only requires electricity and compressed air, Dimensions: 980 × 600 mm Weight: 230 kg Helps: extend the life of the adhesive prevent hardening speed up the restart of production after a night or weekend Preheating: Integrated heating enables a quick start of production after changing or storing the container. Cleaning: Automated process of emptying and cleaning application units. In good condition, fully functional Find more here - / Contact us at -

Edge banding machine Type: Tempora 45.03L Manufacturer: Format-4 Year: 2019 Smartuch control unit: 10.4" touch screen for easy control of the units. Pre-milling unit: Two counter-rotating diamond cutters for a clean cut without breaking out. Glue tray: Quick maintenance and the ability to work with EVA and PUR adhesives. Complete processing: Cutting, multifunctional milling, corner grinder for corner processing, radius sanders and surface sanders. Cleaning spray (at the rear): The machine is equipped with nozzles for applying cleaning agent in front of the polishing brushes, which guarantees a clean surface without glue residues. Technical parameters: Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Feed speed: 10 m/min Installation length: approx. 4,230 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

Equipment Included - Wurster and Dietz OPTIMAT swing-stroke full gate saw, built circa 1970 - Splitting wedge - Cross conveyor - Roller conveyor - Sharpening machine - Setter - Wurster and Dietz Edge Saw FR 7, built circa 1965 Find more here - / Contact us at -

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular