We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Tipo de máquina
Fabricante
- Amplificador de medição (3)
- Controlo de soldadura 50Hz (6)
- Conversores de frequência (3)
- Escolha e Lugar (4)
- FREQUÊNCIA (6)
- Forno de refluxo (10)
- Frequência (3)
- Impressora de estêncil (5)
- Máquina de Pick and Place (7)
- Sistemas AOI (9)
- Transformador (4)
- ABB (14)
- ABB ,SIEMENS (1)
- ABB OY (10)
- ACA (1)
- AEG (1)
- AGILENT HP (1)
- Allen-Bradley (3)
- AMAT (2)
- AMP-POWER (1)
- ANEMA (1)
- Applied Materials (2)
- ASM (5)
- ASYS (4)
- ASYS / MODUS (1)
- AVENTICS (1)
- BALLUFF (1)
- BAUMER ELECTRIC (1)
- BECKHOFF (1)
- BECKHOFF, BOSCH, LUMIFLEX (1)
- BEHA AMPROBE (1)
- BOSCH (1)
- BOSCH REXROTH (1)
- Bosello (4)
- BOTTER (1)
- BPM (2)
- BRüEL + KJAER (1)
- Canon (3)
- Capstone (2)
- CASCADE (1)
- CDE (1)
- CeraCon (2)
- CLECO (1)
- CLECO / APEX TOOL GROUP (1)
- CONSILIUM SELESMAR (1)
- DAGE (1)
- DALEX (2)
- Danfoss (10)
- DELTA NV (1)
- DFMG (1)
- DIMA (1)
- Dimplex (2)
- DINO ARGEO (1)
- DNS (1)
- DR. MACH (1)
- DRäGER (1)
- DRäGER USW. (1)
- DSM (1)
- DUNGS (1)
- E+H (8)
- EATON (1)
- ECKELMANN (1)
- EDA Industries (2)
- Edmolift (2)
- EFACEC (1)
- EKRA (5)
- EKRA AND MIMOT PRINTING LINE. (1)
- ELCO (1)
- ELECTROMOTOR ABM (1)
- ELECTRONICS (1)
- ELIN (1)
- ELMOWA (1)
- ELSTER (1)
- ELTEX (1)
- Endress + Hauser (2)
- Endress und Hauser (25)
- ESA AUTOMATION (1)
- ESEC (5)
- Essemtec (5)
- Euro-Diesel S.A. (2)
- Eurodrive (2)
- EVG (1)
- FAFNIR (1)
- Fanuc (2)
- FEI (1)
- FERROCONTROL RAPID (1)
- Festo (3)
- FUJIWA (1)
- GAC (3)
- GASS (1)
- GEFRAN (1)
- GEMÜ (1)
- GENERAL ELECTRIC (1)
- GOM ATOS (1)
- GOPEL ELECTRONIC (1)
- GOPEL ELECTRONICS (1)
- GRAM (1)
- GREEN TRANSFO (1)
- GSA (1)
- GUCBAR (1)
- GüNTNER (1)
- GöPEL (1)
- HANSELIFTER (1)
- HARTING (1)
- HBM (3)
- Heidenhain (2)
- HEINA (1)
- HENGSTLER (1)
- HESSE (1)
- HEWLETT PACKARD (1)
- HORLEMANN (1)
- ... mais
A indicação da distância não é possível, porque não foi possível determinar sua localização. O pré-requisito é que seu navegador permita cookies e determinação de localização.
Tipo de máquina
(Quantidade: > 9)
Tipo de máquina
(Quantidade: > 2)
Fabricante:
(Categoria: 2100)
ABB 14
ABB OY 10
ACA 1
AEG 1
AMAT 2
ANEMA 1
ASM 5
ASYS 4
AVENTICS 1
BALLUFF 1
BECKHOFF 1
BOSCH 1
Bosello 4
BOTTER 1
BPM 2
Canon 3
Capstone 2
CASCADE 1
CDE 1
CeraCon 2
CLECO 1
DAGE 1
DALEX 2
Danfoss 10
DELTA NV 1
DFMG 1
DIMA 1
Dimplex 2
DNS 1
DR. MACH 1
DRäGER 1
DSM 1
DUNGS 1
E+H 8
EATON 1
Edmolift 2
EFACEC 1
EKRA 5
ELCO 1
ELIN 1
ELMOWA 1
ELSTER 1
ELTEX 1
ESEC 5
Essemtec 5
EVG 1
FAFNIR 1
Fanuc 2
FEI 1
Festo 3
FUJIWA 1
GAC 3
GASS 1
GEFRAN 1
GEMÜ 1
GOM ATOS 1
GRAM 1
GSA 1
GUCBAR 1
GüNTNER 1
GöPEL 1
HARTING 1
HBM 3
HEINA 1
HESSE 1
hull 2
IBL 1
IDEC 1
INDRAMAT 1
ISMECA 1
JCM 1
KEB 3
KEYENCE 1
KOLB 1
KROHNE 1
KRONES 1
LAUER 1
LENORD 1
Lenze 4
LEUZE 1
LUDY 1
MADER 1
Matrix 3
MEIER 1
Mimot 3
MURATA 1
MUSASHI 1
MYCRONIC 3
MYDATA 1
NeoDen 12
NINGBO 1
OKAYA 1
Omron 2
ORBOTECH 1
PARKER 1
PCE 1
PEISER 1
PHöNIX 1
Pilz 2
PSG 2
Raritan 2
RASCO 1
Rehm 2
REXROTH 1
Rittal 2
RITZ 1
Rosemount 10
RS 1
SAMCO 1
SAMSON 1
SAUTER 1
Schmid 2
SCHMIDT 1
SCHROFF 1
SEHO 1
SEW 2
SHINKAWA 1
SIEMENS 32
Sigmatek 2
SMALLSMT 1
SMT 4
SNACH 1
SODICK 1
SORL 1
SPEA 1
TBK 1
TDK 1
Tesec 2
TMC 1
TRANE 1
TSO 1
UNIPO 1
VACON 1
VEECO 1
VERGNET 2
Viscom 2
VITOLI 1
WENGLOR 1
Wolf 2
Woodward 7
X 1
YASKAWA 1
Manufacturer: Koh Young Model: Zenith Lite Year of Manufacture: 2022 Machine Type : Advanced 3D Inspection Machine Inspection Type: Post-Reflow AOI Power: 2.2 kW Voltage: 220 V AC +/- 10%, Single Phase, 50/60 Hz Rated Current: 5 Amp Maximum Current: 10 Amp Input Pneumatic Pressure: 0.5 to 0.8 MPa Machine Dimensions: 1000 x 1265 x 1627 mm Machine Weight: 600 kg IP Grade: IP 2X Condition: Used Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Koh Young Year of Manufacture: 2022 Model: Zenith 2 Machine Type : Advanced 3D Inspection Machine Power: 2.2 kW Voltage: 220 V AC +/- 10%, Single Phase, 50/60 Hz Rated Current: 5 Amp Maximum Current: 10 Amp Input Pneumatic Pressure: 0.5 to 0.8 MPa Machine Dimensions: 1000 x 1530 x 1805 mm Machine Weight: 750 kg IP Grade: IP 2X Condition: Used Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Koh Young Year of Manufacture: 2022 Model: aSPIre 3 Machine Type : Advanced 3D Inspection Machine Power: 2.2 kW Voltage: 220 V AC +/- 10%, Single Phase, 50/60 Hz Rated Current: 5 Amp Maximum Current: 10 Amp Input Pneumatic Pressure: 0.5 to 0.8 MPa Machine Dimensions: 1000 x 1295 x 1727 mm Machine Weight: 600 kg IP Grade: IP 2X Condition: Used Technical Specifications FeatureDetailsOperating SystemWindows 10 Enterprise LTSC 64-bit Min. PCB Size50 x 50 mm Max. PCB Size510 x 510 mm Machine DimensionsApprox. 1000 x 1280 x 1520 mm (W x D x H) WeightApprox. 600 kg InterfaceSMEMA Power/Air Supply200-240 V, $4-5~kgf/cm^{2}$ Conveyor Height920 mm ± 50 mm Key Highlights & Technology Camera System: Equipped with an 8 Megapixel high-speed camera system. Resolution: Comes standard with 20µm resolution, but 15µm can be selected from the factory depending on req ...
Manufacturer : REHM Thermal Systems Model: VXS air 3500 (Type 734) Type: Convection Reflow Soldering Oven Quantity available: 2 units Operating hours : 2,500 hours Condition: Used Key Specifications - Heating zones: 7 pre-heating zones / 3 peak zones / 4 cooling zones - Fan control: 1x top heating fan regulation - PCB width: 55 to 460 mm (with centre support from 65 mm), optional 508 mm - Chain pins: nickel-plated, 5 mm bolt length standard - Transport system width adjustment: manual (electric touchpad operation) - Heating: top and bottom heating - Display: flat screen and three-colour signal lamp - Control system: industrial PC with Ethernet network interface - Software: Vicon with Windows 10 Enterprise LTSC - Certification: CE compliant - Standby mode: Yes Find more here - .ucymachines/ Contact us at - sales@ucymachines
Product Overview: EDA Industries SM 24 FH 150 Description: The EDA Industries SM 24 FH 150 is a high-performance Burn-In Oven System designed for reliability and stress testing of semiconductor devices. This 2018 model is engineered to simulate extreme operating conditions, helping to identify infant mortality failures in integrated circuits and power modules before they reach the final consumer. Technical Specifications: - Manufacturer: EDA Industries - Model: SM 24 FH 150 (SM24 / SP40 Series) - Year of Manufacture: 2018 - Application: Semiconductor Burn-in / Reliability Testing / Life Cycle Testing - Max Operating Temperature: 150°C (Standard) - System Type: Thermal Chamber with Electronic Testing Interconnects Physical Dimensions: - Width: ~79.13 in (201 cm) - Depth: ~86.61 in (220 cm) - Height: ~78.74 in (200 cm) - Weight: ~1,800 lbs (816 kg)
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
Atomic Force Microscope (AFM)An Atomic Force Microscope (AFM) measures topography, feature size, defects, and properties of solid surfaces. The Dimension X AFM provides depth metrology solutions.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
Você não encontrar a sua máquina queria?
enviar inquérito procurado
a todos os revendedores (registo não é necessário)
