prensas usadas para venda (1,825)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12120 €: 232.7 €: 160 to: horizontal verschiebbar : 400 mm: 900 mm: 1450 mm: 6,2 mm/s: 9.8 mm/s: 1450 x 450 mm: 5,5 kW: 1640 mm: 1000 mm: 2550 mm: 1300 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure GaugeINCL. OPTIONAL EQUIPMENT:handwheel with locking pin for cylinder adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 220 mmcolumn arm: 280 mmdayligth: 440 mmwork stroke: max. 250 mmtotal power requirement: 22 kWweight of the machine ca.: 13 tPress force: 160 tBending length: 3,050 mmDistance between columns: 2,550 mmTable width: 220 mmThroat depth: 280 mmInstallation height (daylight): 440 mmMax. stroke: 250 mmTotal power requirement: 22 kWMachine weight: approx. 13 tAdditional InformationStroke speed:Downward (rapid approach): 90 mm/sPressing speed: 11 mm/sReturn speed (upward): 90 mm/sOperation: Two-hand control and foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 5.5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mm Exhibition machine from 2023 with only approx. 2x operating hours condition like NEW special price on requestEquipment:- robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Including round steel chain and 2x locking bolts Piston rod with metric mount- 1x set of V-block prism support- Pressure gauge for pressure display- Simple manual operation with : 1x feed speed 1x working speed 1x retractio ...

: gebraucht : 2024 : 7319 : prompt, Zwischenverkauf v : Türkei : 6900 €: 1 : 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTION:1 pair of V-block € 540,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 120 tstroke: 400 mmdayligth: 900 mm: 1220 mm: 400 mmfeed down: 5,8 mm/secfeed up: 9,5 mm/secHeads: 200x125 mmtotal power requirement: 6 kWweight of the machine ca.: 1250 kgdimensions of the machine ca.: 1900x1000x2550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: - mmstroke: 8 - 116 mmtotal power requirement: 8 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 mNo. 0778Single-column eccentric press 1000 kNStroke adjustment 8-116 mm, stroke rate 65/min,ram adjustment 80mm,Space requirement2.1x 1.7 x 3.1 m,Weight approx. 7500 kgStand tiltable, 10°/20°/30°Working area: table 800 x 560Drive: 8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 28.0 tthroat: 225 mmstroke: 150 mmtable surface area: 325 x 300 mmwork speed: 2.0 - 9.8 mm/sekreturn speed: 12.8 mm/sektotal power requirement: 4.0 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1800 x 900 x 2000 mm- NC control to adjust the piston stroke- Selector switch for manual or semi-automatic operation- Flow control valve and pressure control valve- Integrated pressure gauge- Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tstroke: 380 mmtable surface area: Arbeitsbreite 750 mmpressure: 259 baroil volume: 38 dm³ajustment speed: 2,87 mm/secwork speed: 9,5 mm/secreturn speed: 12 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 540 kgInner diameter of the cylinder [mm]: 170Piston rod diameter [mm]: 75Diameter piston crown [mm]: 100- Integrated pressure gauge- Pressure regulator- Hydraulic unit with 2 speeds- Working table adjustable in height- Joystick to move the piston up / downThe 60 ton workshop press has a fixed cylinder and aheight-adjustable work table (motorized). Equipped withPressure regulation, manometer, 2 speeds and a joystick for themove the piston up and down. With this joystick you can use the piston preciselymove, making this hydraulic press perfect for precision jobssuitable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2 x 2 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 4100 mmdistance between columns: 3100 mmdayligth: 370 mmstroke of upper beam: 200 mmthroat: 500 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 86.0 mm/secwork height max.: ca. 900 mmback stop - adjustable: max. 500 mmControl: CYBELEC oil volume: 150 ltotal power requirement: 15.0 kWweight: 12000 kgrange L-W-H: 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition () Includes optional equipment- in checked conditions - machinevideo - https://www.youtube.com/watch?v=pleltYCkXDQEquipment:- Electro-hydraulic CNC press brake- With DELEM CNC control unit Swiveling control panel (front right) Tool & program library Simple CNC programming- CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning- CNC motorized backgauge (X-axis) With 4x manually adjustable stop fingers (Z-axis)- CNC motorized height ...

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 4500x2000x2900 mmweight: 13.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat: 200 mmstroke: 0 - 60 mmtable:: 400 x 600 mmtable:: 150 mm - Bohrung no. of strokes: 140 Hub/minbore: 40,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 300 mmtotal power requirement: 3,0 kWweight: 1.670 kgrange L-W-H: 1150 x 1350 x 2050 mmFurnishing:- Welded steel structure body frame- AISI 4140 (42CrMo4) alloy steel crankshaft- CNC ground for maximum precision SnBz-12 quality- Bronze bearings, ground for minimal surface resistance- 4 sides pneumatic clutch-brake combination- PLC control for safety (PILZ Germany)- Photo cell light barriers around the work table (PILZ Germany)- Two-hand and foot pedal control- Adjustable stroke- Central lubrication system- CE safety approval by TÜV- electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRONThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tstroke: 400 mmtable-size: 1150 x 350 mmdiameter of piston: 300 / 185 mmthroat: 225 mmspeed of pressing: 166 mm/secpre-running speed: 75 mm/secreturn speed: 208 mm/sectotal power requirement: 14 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mPress force: 160 tStroke: 400 mmTable size: 1,150 × 350 mmCylinder diameter: 300 / 185 mmThroat depth: 225 mmPressing speed: 6 – 16 mm/sRapid approach speed: 75 mm/sReturn speed: 208 mm/sTotal power requirement: 14 kWMachine weight: approx. 8.5 tPressing speed: 6 – 16 mm/sRapid approach speed: 75 mm/sReturn speed: 208 mm/sInstallation distance between ram pressure pad and crosshead pressure pads: 320 mmDistance between pressure pads on ram and table: 50 – 888 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tPress force: 250 tThroat depth: 360 mmTable size: 1,250 × 630 mmTable opening diameter: 250 mmRam clamping surface: 850 × 450 mmInstallation height (daylight): 800 mmRam stroke: up to 500 mmMain cylinder diameter: 400 / 360 mmRam speed (downward): 200 mm/sRam speed (upward): 110 mm/sTotal power requirement: 20.5 kWMachine weight: approx. 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 4100 mmControl: CYBELEC DNC 900 stroke: 260 mmweight of the machine ca.: 16.000 kgdimensions of the machine ca.: 4500x2400x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 €: 1631.07 €: 150 to: 300 mm: 950x650 mm: 1200x750 mm: 550 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3250 mm: 8200 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tPress force: 250 tThroat depth: 360 mmTable size: 1,250 × 630 mmTable opening diameter: 250 mmRam clamping surface: 850 × 450 mmInstallation height (daylight): 800 mmRam stroke: up to 500 mmMain cylinder diameter: 400 / 360 mmRam speed (downward): 200 mm/sRam speed (upward): 110 mm/sTotal power requirement: 20.5 kWMachine weight: approx. 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 300 mmtable surface area: 1070 x 315 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1870 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mmFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed- Piston can be stopped in any position- Hydraulic tank mounted on t ...

pressure: 10 tthroat: 160 mmstroke: 0 - 40 mmtable:: 270 x 370 mmtable:: 100 mm - Bohrung no. of strokes: 200 Hub/minbore: 25,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 180 mmtotal power requirement: 0,75 kWweight: 590 kgrange L-W-H: 1.168 x 1.010 x 1.670 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 6100 mmcontrol: MNC 95 c Number of working hours: 4312 hvoltage: 380 V / 50 Hz V: 7.100 x 2.450 x 3.400 mmtotal power requirement: 22 kWweight of the machine ca.: 26 tMaximum press force: 320 tBending length: 6,100 mmDistance between side frames: 5,500 mmControl system: MNC 95 CMaximum ram stroke: 250 mmMaximum daylight (table to ram): 500 mmThroat depth: 300 mmTable width: 250 mmApproach speed: 80 mm/sWorking speed: 7 mm/sReturn speed: 70 mm/sOil tank capacity: 350 lOperating hours: 4,312 hPower supply: 380 V / 50 HzTotal connected load: 22 kWMachine weight: approx. 26 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to: 400 mm: 1000x680 mm: 1000x740 mm: 765 mm: 250 mm/s: 10-20 mm/s: 22 kW: 2400 mm: 1525 mm: 3900 mm: 10500 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 ttable length: 670 mmtable width: 570 mmtotal power requirement: 8 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 2 x 2 x 3 mNo. 2886Spotting press 200 kNRICE TUS 60 OK 20Stroke approx. 700Drive: 7,5 kWHydraulic controlExtendable table 670 x 570 mm,Swivel-out top plate 670 x 570 mm,Installation height 740 mmClearance between the columns 620 mm,Space requirement L/W/H 1870 x 1620 x 3000 mm,Weight approx. 3.5 to.Asking price: 8.500,-- ex works / EXWAsking price: 12.900,-- EXW warehouse loaded free on suitable truckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to: 400 mm: 750x570 mm: 750x615 mm: 630 mm: 300 mm/s: 10-25 mm/s: 7.5 kW: 1710 mm: 1150 mm: 3170 mm: 4900 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 71000 €: 1341.9 €: 150 to: 300 mm: 750x500 mm: 1000x700 mm: 500 mm: 10 mm/s: 3,5 mm/s: 22 mm/s: 7.5 kW: 2300 mm: 1400 mm: 2750 mm: 7700 kg2-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 52500 €: 992.25 €: 60 to: 250 mm: 500x430 mm: 750x500 mm: 450 mm: 26 mm/s: 8,5 mm/s: 47 mm/s: 7.5 kW: 1820 mm: 960 mm: 2400 mm: 4000 kg2-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 59700 €: 1128.33 €: 100 to: 300 mm: 680x420 mm: 1100x600 mm: 500 mm: 17.5 mm/s: 5,5 mm/s: 37 mm/s: 7.5 kW: 1850 mm: 1400 mm: 2650 mm: 5400 kg2-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 6100 mmdistance between columns: 5600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 160 mm/sbending speed: 0-9 mm/stotal power requirement: 32 kWweight of the machine ca.: 36.000 kgdimensions: 6970 x 2300 x 4150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 €: 3109.05 €: 260 to: 500 mm: 1400x1000 mm: 600 mm: 75 mm/s: 5 mm/s: 60 mm/s: 22 kW: 2800 mm: 1650 mm: 2750 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.