máquinas e equipamentos para engenharia de processo usadas para venda (7,633)

Sandwich panel production line Type: KAM-LINE-SP-001 Manufacturer: Klei adhesive machinery Year: 2018 Total built-up area of ​​the line: 7 x 23 m Sandwich panel dimensions Width: 150 - 1500 mm Length: 250 - 2900 mm Thickness: 30 - 70 mm Press pressure approx.: 500 kg/m2 Heating temperature: 60 °C Electrical input up to 45 kW Power max.: 50 kW Optimal air pressure max.: 6-8 bar Electricity source 3 phases 400V, 50Hz Dimensions: 20000x6000x5000 mm Total weight: 10,000 kg The line enables the production of assembly panels in a semi-automated manner: simultaneous processing of multiple orders based on customer requests, already at the design stage, including preparation of the panel layout on the shipping pallet, the modular design of the line allows transfer between two or even three assembly tables, adhesive mixing and application are performed by an automatic ...

Okta 6000 - New und with Motor Okta 1000 - neu without Motor 1. Pfeiffer Vacuum Okta 6000The Pfeiffer Vacuum Okta 6000 is a Roots vacuum pump (also known as a Roots blower or vacuum booster). It is designed for industrial applications that require high pumping speeds in low and medium vacuum ranges.Primary Function: It acts as a booster to increase the pumping speed of a vacuum system, usually paired with a backing pump (like a rotary vane or screw pump).Performance: It has a nominal pumping speed of approximately 6,000 to 7,300 m³/h. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Hanel Type: Lean-Lift Model: 1300-825 Year of Manufacture: 2007 Drive Power: 5.5 kW Operating Mode: 100% ED Voltage: 400V, 3-phase, 50Hz Current: 12.0 A Max Container Load: 250 kg Average Container Load: 33 containers front / 34 containers rear Front Load Capacity: 250 kg Rear Load Capacity: 250 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Durr Type: LTB RK 15 Type of Machine : Regenerative Thermal Oxidiser (RTO) Year of Manufacture: 2018 Complete internal rebuild: 2024 and 2025 1. Capacity – SCFM vs Nm³/h The RTO is designed to operate efficiently across a wide flow range, and the official design envelope from the manufacturer is: - 3,000 – 15,000 Nm³/h This matches the customer’s VOC report, which shows: - Combined extraction: 13,000–14,000 Nm³/h - Maximum recorded: 15,000 Nm³/h The unit will not be oversized for their process and will maintain autothermicity depending on solvent load. 2. Chamber Design The RTO is a 3‑chamber ROxiTHERM system, as confirmed in the original 2018 LTB quotation. This means: - No buffer tank required - No plenum required - Stable emissions during valve switching - No need for simulated 3‑chamber operation The system also includes a hot‑gas bypass ...

Air Pollution Control Equipment - Camfil Multiple air pollution control units from Camfil, one of the worlds leading manufacturers of air filtration and clean air solutions. This lot includes items comprising a range of air filtration and pollution control devices. Additional units sourced from Trox Technik and Ziehl-Abegg , both respected names in air handling and fan technology. Electrical cabinets from Thalassa are also included . Air Humidity Control Equipment - Fisair A complete set of air humidity control units from Fisair,providing a range of humidification capacities suitable for controlled environments, pharmaceutical facilities, aboratories,and clean rooms. Industrial Chiller - Trane Sintesis Advanced One Trane Sintesis Advanced industrial chiller , a high-performance cooling unit from Trane, a globally recognised leader in HVAC and cooling technology. The Trane Sintesis  ...

Manufacturer: Torusmill Model: TM-100 Year: 2004 The cooling circuit is not included Technical Specifications - Tank Volume: 100 L - Grinding Material Capacity: 40 - 70 L - Grinding Basket Volume: 4.3 L - Bead Fill Level 50%: 2.135 L - Main Motor Power: 15.0 kW - Motor Speed: 0 - 3,000 rpm - Shaft Speed: 100 - 2,000 rpm - Power Supply: 3 x 400 V / 50-60 Hz - Fusing: 3 x 50 A, 2 x 2 A - Total Weight: approx. 1,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

This is an opportunity to acquire a complete, ready-to-restart feldspar processing plant and open-pit quarry.The facility has been in operation since 1909 . The operation was closed in early 2023 for strategic and market reasons — not due to any fault in the asset itself. The site includes a fully equipped processing factory, an open-pit quarry with an active environmental and quarrying permit valid until 31 December 2052 all buildings, and approximately 26 hectares of land. The quarry permit is transferable to a new owner. Key Points : - High-value feldspar deposit: Mix of potassium and sodium feldspar (50/50). Low iron content of 0.20% in grinding plant output and 0.14% at the open-pit face. - Strong proven yield: 17,000 tonnes per blast. Approximately 2.6 tonnes of feldspar per cubic metre of solid rock. - Crusher output: 0.4 mm particle size. Capacity of 40 tonnes per hour. - Gri ...

Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Model: KM 350-2700 C2 Year of Manufacture: 1998 Type of Machine : Injection Moulding Machine Machine Weight: 16,000 kg CE Certified: Yes Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Engel Model: 330/75 HL Year of Manufacture: 2002 Type of Machine : Injection Moulding Machine Machine Weight: 5,850 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Sepro Model: Strong 40 LV Year of Manufacture: 2018 Machine Type : Injection Moulding Robot - Mounted on SGM in early 2019 - Production stopped in 202 - Not frequently used. Mechanical Specifications - Robot weight: 757 kg - Payload capacity: 20 kg - Overall dimensions (Y and Z retracted): 5385 x 2145 x 1910 mm - Pneumatic operating pressure: 6 bar +/- 10% - Maximum pneumatic pressure: 7 bar - Nominal air consumption: 180 l/min - Peak air consumption: 820 l/min Axis Strokes and Performance - X-axis (horizontal traverse): 4000 mm stroke, 2.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Y-axis (horizontal demould): 1100 mm stroke, 1.8 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Z-axis (vertical): 2000 mm stroke, 2.5 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - All axes: brushless servo mot ...

Manufacturer: Sepro Model: Success 33 Year of Manufacture: 2018 Machine Type : Injection Moulding Robot - Mounted on SGM in early 2019 - Production stopped in 2021 - Not frequently used Mechanical Specifications - Robot weight: 511 kg - Payload capacity: 15 kg - Overall dimensions (Y and Z retracted): 4010 x 1710 x 2520 mm - Pneumatic operating pressure: 6 bar +/- 10% - Maximum pneumatic pressure: 7 bar - Nominal air consumption: 140 l/min - Peak air consumption: 820 l/min Axis Strokes and Performance - X-axis (horizontal traverse): 3000 mm stroke, 1.7 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Y-axis (horizontal stripping): 900 mm stroke, 2.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Z-axis (vertical): 1600 mm stroke, 3.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - All axes: brushless servo mot ...

Manufacturer: Macchi Year of Manufacture: 2012 Machine Type : 3-layer co-extrusion blown film line Condition: Good working condition, currently in production Materials LLDPE, LDPE, LLD, HDPE Extruders - Configuration: 65 mm + 80 mm + 65 mm (3 extruders) - Heaters: Infrared - Filtration: 3 plate filters Die Head - Type: 3-layer blown film die head - Reference: TE5303-IBC-350/500 - Die diameters available: 350 mm and 400 mm - Die gap: 1.8 mm - Internal Bubble Cooling (IBC): yes Output - Maximum output: up to 800 kg/hour depending on material formulation Air Ring - Type: Dual flow air ring, carbon fibre construction Take-Off Unit - Take-off width: 2400 mm - Nip type: Oscillating - Side gusseting: motorised Rewinder - Type: Double winder, fully automatic back-to-back rewinder - Roll change: fully automatic - Maximum reel diameter: 800 mm - Winding width: 2350 mm Accessorie ...

The Niehoff D631 is a high-performance double-twist bunching machine designed for the production of copper strands and the stranding of insulated wires. By 2014, this model was well-established for its Eco-Bow energy-saving design and high precision in spooling. Production Performance - Max. Production Speed: 300 m/min - Max. Number of Twists: 6,500 twists/min - Cross Section Range (Cu soft): 0.09 – 6.0 mm² - Lay Length (Infinitely Variable): 6 – 100 mm - Twist Direction: S or Z Spool & Winding Dimensions - Max. Spool Flange Diameter: 630 mm - Total Spool Width: 475 mm - Max. Spool Capacity: approx. 750 kg - Core Diameter: 224 mm – 250 mm - Bore Diameter: 56 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer : IMRO Year of Manufacture : 2020 Belt Width : 1,200 mm Axle Spacing (Length) : 10,980 mm Drive Motor : 3.0 kW, 230/400 V, 50 Hz, IP54, 32 rpm Drive Type : Mounted geared motor Belt Type : EP 400/3 3:0 mm Side Guides : 250 mm Weight : 2,700 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Compressors Nirvana oil-free variable speed screw compressors 55-75 kW it ran 19138 hours. Nirvana oil-free compressors, with a matching variable speed inverter and hybrid permanent magnet motor (HPM®), offer unparalleled energy efficiency at all speeds and outstanding reliability. They deliver ISO 8573-1:2010 Class 0 certified, 100% oil-free air for the most critical applications Find more here - .ucymachines/ Contact us at - sales@ucymachines

Automatic book binding line Type: KM 411.C Manufacturer: Kolbus Year: 2007 Imp. Count: approx. 15 000 impressions In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ABB Model: IRB 1200-7/0.9 Omicore Warranty until 23.09.2026 Reach 901 mm Load capacity 7 kg Additional arm load 0.5 kg Axles 6 Robot controller: Omicore C30 Position repeatability: 0.013 mm Cycle time 7 kg version 1 kg pick & place cycle 25 x 300 x 25 mm: 0.4 s Maximum TCP speed: 7.3 m/s Max. TCP acceleration: 35 m/s² Acceleration time: 0 –1 m/s 0.06 s Robot footprint: 210 x 210 mm Weight: 54 kg MANIPULATOR - Manipulator variant: IRB 1200-7/0.9 - Manipulator color: ABB Graphite White std - Manipulator protection: Base 40 - Robot cabling: From the base side STEERING - Control variant: OmniCore C30 - Control Housing: Base - inch rack mounting kit: Yes - Operating temperature: max. 45 °C - Mains voltage: 220–230 V AC +10%/-15% - Connected Services: Wired LAN - Ethernet Switch: 5-port Ethernet switch - Additional logic 24 V power supply: 24 V,  ...

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Model: 80-390 C1 Year of Manufacture: 2001 Electrical Specifications Operating Voltage: 3-Phase, 400 V Frequency: 50 Hz Total Rated Current: (In Total) 57 A Motor Current: (I Motor) 30 A Main: Fuse 80 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Keyence Model: WM 3000 Year of Manufacture: 2020 Type of Machine : 3D coordinate measuring system The device has already been upgraded to Windows 11 Measurement Specifications - Maximum Measuring Range (W x D x H) 10000 x 3500 x 5000 mm - Guaranteed Accuracy Range (W x D x H) 3000 x 1500 x 1500 mm - Measuring Accuracy +/- (28 + 5L/1000) micrometers - Repeatability +/- 10 micrometers Minimum Display Resolution - Distance Resolution 0.001 mm - Angle Resolution 0.001 degrees Camera Unit Rotation - Theta Rotation (Pan) +/- 90 degrees - Tilt Rotation +/- 30 degrees Connectivity - External Input Voltage-free input, 2 inputs - Bluetooth Bluetooth 5 - USB USB 3.0 - Infrared Communication 945 nm Power Supply - Power Supply Type Supplied via dedicated power supply unit - Rated Voltage DC 24 V - Power Consumption 1.7 A Environmental Conditions - Operating Temperature  ...

Manufacturer: Engel Model: e victory 50/50 Year of Manufacture: 2019 Operating Hours: 18,660 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 50 Material Injection Unit: Thermoplastics Screw Diameter: 18 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 450 x 500mm Closing Force: 50to Platen Spacing: 600 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 600 Kg

Manufacturer: Engel Model: e victory 170/110 Year of Manufacture: 2019 Total Running Hours: 23,838 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 680 x 740mm Closing Force: 110to Platen Spacing: 800 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 1600 Kg Automation: Linear Roboter Vipe Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Engel Model: e-motion 170/110 T Year of Manufacture: 2014 Total Running Hours: 6,317 Hours Condition: Very good technical condition Technical Details Drive: Fully Electric Year of Manufacture: 2014 Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 and 30mm Drive Injection Unit: Electric Construction: Mit Holme Clamping Plate: 680 x 730mm Closing Force: 110to Platen Spacing: 850 mm Drive: Electric Tool Weight Max: 1600 Kg Linear Roboter Viper Series: Viper 12 Year of Manufacture: 2014 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Engel Model: Victory 1050/200 Year of Manufacture: 2006 Machine type: Injection Molding Machine Operating hours: 107027 Closing force: 200 t Screw diameter: 55 mm Max. injection volume: 511 cm3 Fixing plate: 860 x 860 mm Machine weight: 12.9 t Find more here - .ucymachines/ Contact us at - sales@ucymachines