máquinas e equipamentos para engenharia de processo usadas para venda (7,636)

Carlier CITP fiberglass reinforced composite (GRP)Chemical S-storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-186

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-183

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-167

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-153

F.I.P.P. fiberglass reinforced composite (GRP) Auction-ID: A1-48805-158

Lacaze Energies tank (2016) Auction-ID: A1-48805-130

Lacaze Energies Tampon Buffer tank (2020)1,500L capacityRated for 7 bar pressure, maximum temperature of +170C Auction-ID: A1-48805-116

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-192

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-172

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-180

Alliance 25,000L Stainless Steel Tank Auction-ID: A1-48805-142

Lacaze Energies EG 2000 Litre Reservoir Auction-ID: A1-48805-99

F.I.P.P. fiberglass reinforced composite (GRP) Auction-ID: A1-48805-157

Manufacturer: Rosler Model: Z800 Type of Machine: Centrifuge Control Cabinet Designation: Schaltschrank Year of Manufacture: 2013 Pre-fuse: 180 A Mains Supply: 400 V, 3Ph/N/PE Frequency: 50 Hz Control Voltage: 24 V DC Power Rating : 65 kW Nominal Current : 150 A Main Drive : 18.5 kW / 34.5 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

20126,000 mm

Auction-ID: A1-48931-467

Auction-ID: A1-48931-370

Auction-ID: A1-48931-466

Auction-ID: A1-48931-371

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Georg Model: 4518-3-07 Year of Manufacture: 2008 Material Processed: Cold-rolled steel strip Tensile Strength: 200 – 600 N/mm² Material Thickness: 0.4 – 4.0 mm Strip Width: 300 – 1650 mm Edge Scrap Width: max. 100 mm per side Strip Speed: 0 – 60 m/min Type of Machine: Edge Scrap Cutter with Trough Conveyor Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Kaeser Model: SK 25 T Type of machine: Screw compressor Year of manufacture: 2018 Key specifications: - Drive power 15 kW - Operating pressure 11 bar - Running hours 6305 hours,total, of which 3101 load hours. Included components: Pressure vessel included in scope of delivery, delivered as a complete,ready-to-connect and ready-to-use unit. Find more here - .ucymachines/ Contact us at - sales@ucymachines

See pictures for more details year is around 2008

[ GENERAL DATA ] Equipment Type: Non-Cycling Refrigerated Air Dryer Manufacturer: Kaeser Kompressoren (Germany) Series: TAH - TBH - TCH Series [ PERFORMANCE ] Flow Capacity: 2.20 m³/min (approx. 77.7 CFM) Pressure Dew Point: +3 °C (+37.4 °F) Pressure Loss: 0.20 bar Max Inlet Temp: +50 °C (+122 °F) [ MECHANICAL & PRESSURE ] Max Working Pressure:16 to 18 bar (232 to 261 PSI) Air Connection: G 1 (Female Thread) Condensate Outlet: G 1/4 Condensate Drain: ECO-DRAIN (Electronic, Zero Pressure Loss) [ ELECTRICAL & REFRIGERATION ] Power Supply: 230 V / 1 Phase / 50 Hz or 60 Hz Power Consumption: 0.46 kW (at 100% volume) Refrigerant Type: R-134a Cooling Method: Air-Cooled Fan Assembly [ DIMENSIONS & WEIGHT ] Height: 879 mm (34.6 in) Width: 427 mm (16.8 in) Depth: 608 mm (23.9 in) Total Weight: 55 kg (121.2 lbs)

Manufacturer: Hegla Year of manufacture: February 2002 Model: VSG-A 46 MT Type of machine: Cutting system for laminated safety glass (VSG) Running direction: right to left Connected load: 35 kW Dimensions of the system (width x height x length): 13.2 x 6 x 1 meters Maximum glass size (width x height): 4600 x 3210 mm Maximum single glass thickness: 16 mm Condition: Rated 2 out of 6 (good), where 1 is very good and 6 is unsatisfactory Operational status: Operational (yes) Additional equipment: Annual maintenance carried out by Hegla Additional documentation included: Operating manual, wiring diagram, layout drawing Remarks: Stops are worn in line with the age of the machine; mechanical alignment required Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ARBURG Model: ALLROUNDER 370 C 800-250 Type of machine: Injection molding machine Year of manufacture: January 2005 Weight: 3180 kg Clamping force: 800 kN Operating voltage: 400V, 3-phase, 50Hz Heating: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW with Multilift handling for inserts Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Arburg Year of manufacture: 2008 Model: ALLROUNDER 370 S 600-290 Type of machine: Wax spraying machine Condition: already dismantled, ready for collection Find more here - .ucymachines/ Contact us at - sales@ucymachines

Engel ES 2550/500 HL - V Hours - 114924 Injection unit Screw diameter mm 70 Screw peripheral speed m/s 0.894 Maximum shot volume cm3/g 1193 Injection pressure maximum hydr/spec bar 2140 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 5000 Maximum opening stroke (distance between the platens) mm 1700 Minimum installation height mm 500 Distance between tie bars Horizontal mm not applicable Distance between tie bars Vertical mm not applicable Centering ring Diameter nozzle side mm 200 Centering ring Diameter ejector side mm 200 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 2 Core pulls DS pcs. 1 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manufactur ...