máquinas injetoras usadas para venda (849)

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

This hydraulic injection moulding machine was manufactured in 1997. It features a clamping force of 1500 kN and a screw diameter of 55 mm, suitable for precise injection moulding processes. The machine dimensions are 4.97 x 1.48 x 2.16 m, and it weighs 8 tonnes. If you are looking to get high quality moulding capabilities consider the Krauss Maffei KM 150-1000 C1 machine we have for sale. Contact us for more information about this machine.

This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the opportunity to buy this Arburg 470 A 800-170 vertical injection moulding machine. Contact us for more information.

This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.

This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information.

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, its designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information.

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine.

This FANUC Roboshot S150iA was manufactured in 2015. Its an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

Máquina de moldagem por injeção Krauss Maffei KM 800-5700 BJ 1999 Dados técnicos a pedido

Máquina de moldagem por injeção Battenfeld Tipo de máquina TM 2700/2800 Tipo de Controlo B2 Ano de construção: 2003/04 Diâmetro do parafuso 75 mm

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...

Ref. no.: 18587Manufacturer: FERROMATIK MILACRONYear of construction: 2001Clamping unitClamping force: 200 tonOpening stroke: 750 mmDistance between tie bars: 560 x 560 mmMould height min.: 300 mmOpening width: 1050 mmPlaten size (h x v): 830 x 830 mmInjection unitScrew diameter: 50 mmInjection volume: 441 cm³Shot weight: 395 gInjection pressure: 2268 barMeasurements and weightDimensions: 6,9 x 2,0 x 2,6 mMachine weight: 13000 kgFurther information:FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall ProductionThe FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especiall ...

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

Máquina de Moldagem por Injeção FCS SD 6000 BJ 2016

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM250-1000CX Ano de Fabricação: 2017 Força de fixação: 250 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 55 mm Deslocamento máximo: 523 cm³ Peso da peça moldada: 476 g/hp Controlo: MC6 Equipamento: Comboio de núcleo de 2 PCS Robô de Interface Controlo de canal de zona quente a 12 vias Unidade de controlo de temperatura de interface

Key data: 4200 kN, 2 g/PS, 80 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM420-4300CX Ano de Fabricação: 2012 Força de fixação: 420 toneladas Espaçamento das longarinas 800 x 800 mm Parafusos DN: 80 mm Deslocamento máximo: 1.810 cm³ Peso da peça moldada: 1.647 g/hp Controlo: MC6 Equipamento: Comboio de núcleo de 2 PCS Robô de Interface Controlo de canal de zona quente a 12 vias Unidade de controlo de temperatura de interface

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: DEMAG Tipo: Conceito ET60-200 Ano de Fabricação: 2003 Força de fixação: 60 toneladas Espaçamento dos longarinos 420 x 420 mm DN dos parafusos: 30 mm Deslocamento máximo: 106 cm³ Peso da peça moldada: 94 g/hp Controlo: NC5 Equipamento: Fabricante do robô: WITTMANN, tipo: W621-1381 Comboio de núcleo de 2 PCS