máquinas injetoras usadas para venda (849)

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details.

Máquina de moldagem por injeção Arburg 420C 1000-290 BJ 2007

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine.

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information.

Máquina de moldagem por injeção Arburg 820S 4000-4600 BJ 2016

Key data: 650 kN, 22 mm

Máquinas de moldagem por injeção BATTENFELD HM 65-130 N.º de ação: 503671 Fabricante: BATTENFELD Tipo: HM 65-130 Controlo: UNILOG B6 Ano de Fabricação: 2011 Oferecemos à venda uma máquina usada de moldagem por injeção BATTENFELD HM 65-130 de 2010. Ideal para uma vasta gama de aplicações de processamento de plástico, esta compacta e potente máquina de moldagem por injeção oferece-lhe precisão, fiabilidade e eficiência energética num design robusto. O BATTENFELD HM 65-130 é perfeito para produzir peças de plástico de alta qualidade com elevada repetibilidade e é particularmente eficiente em termos energéticos, tornando-se uma solução económica para as suas necessidades de produção. Porque deveria escolher esta máquina de moldagem por injeção? Design compacto: Ideal para espaços de produção mais pequenos sem comprometer o desempenho. Efic ...

Ref. no.: 17540Manufacturer: ARBURGYear of construction: 1994Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 270 X 270 mmMould height min.: 200 mmPlaten size (h x v): 405 X405 mmInjection unitScrew diameter: 25 mmInjection volume: 67 cm³Shot weight: 61 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,3 X 1,5 X 2,0 mMachine weight: 2400 kgFurther information:Laboratory Machine with Exceptionally Low Operating HoursThe offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.The control system shows only approximately 100 operating hours and just 867 machine cycles.The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control u ...

Dados técnicos Ano de Fabricação: 2007 Página de encerramento Força de fixação: 1300 t Distância de abertura/altura de instalação máxima: 2300 mm Espaçamento máximo das placas de fixação: 4000 mm Altura de instalação da ferramenta mínima/máx. : 1000 - 1700 mm Placa de fixação máxima. Altura: 1910 mm Tamanho mínimo da ferramenta: 1000 - 1700 mm Espaçamento das luzes: 1500 mm Raio do bico: R40 mm Peso da ferramenta: 29000 kg Curso do ejetor: 350 mm Lado de salpico Diâmetro do parafuso: 135 mm Cilindrada: 8588 cc Cabos Principais AWS/DS: 1/1 Pneu com portão de agulha. : 1 A máquina é entregue com o robô Kuka e pode ser vista em produção.

2 x máquinas de moldagem por injeção EL - EXIS 200 S incluindo célula robótica Wittmann para remoção e alimentação (sem IML) EL - EXIS 300 S incluindo célula robótica Wittmann para remoção e empilhamento (sem IML)

Key data: 5500 mm, 1127 , 70

Diâmetro do parafuso: 70 mmPeso de injeção em poliestireno: 1127 gForça de fixação: 5500 kNDiâmetro do parafuso: 70 mmCurso de curso: 1239 cm³ Peso de injeção no poliestireno: 1127 g/hpPressão de injeção: 1.990 barForça de fixação: 550 tLuzes Espaçamento das barras de ligação H x V: 920 x 830 mmAltura de instalação da ferramenta - mínimo: 350 mmDistância de abertura: 750/1300 mmControlo do microprocessador: KEBA 2880Texto do ecrã: alemão Manual de instruções: alemão Interface FHK para robôs: Euromap 67 Tração de núcleo: 4x Sem tolva de material / sem bateria de água: -/- Potência de acionamento da bomba: 55+4 kWCarga total ligada: 95,4 kWPeso total: 21.000 kgTamanho total: 7,5 x 2,5 x 2,6 mCondições de pagamento: 100 % antes de assumir a máquina, puramente líquida

Key data: 3200 mm, 287 , 50

Diâmetro do parafuso: 50 mmPeso de injeção no poliestireno: 287 gForça de aperto: 3200 kNDiâmetro do parafuso: 35 ou 50 mmVolume de curso: 141/314 cm³ Peso de injeção no poliestireno: 154 / 287 g/hpPressão de injeção: 2.500/1280 barForça de aperto: 320 tLuzes Espaçamento das barras de ligação H x V: 720 x 720 mmAltura de instalação da ferramenta - mínimo: 300 mmCurso de abertura: 600 mmCentralização: 100/100 mmControlo do microprocessador: Selogica direct Texto do ecrã: alemão Instruções de operação: Interface alemãFHK para robôs: Euromap 67 Puxão de núcleo: 2 x Sem tolva de material / Sem bateria de água: -/- máquinade moldagem por injeção totalmente elétrica Peso total: 14.500 kgTamanho total: 6,5 x 2,1 x 2,2 mCondições de pagamento: 100 % antes de assumir a máquina, apenas líquido

Arburg 570C2000-800 AF 2006 Golden Edition, guincho de 1 núcleo, 1 correia transportadora 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 Ano fiscal 2005 Sem funcionalidades principais; 1 correia transportadora

Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible.

This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine.

This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information.

This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information.

This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.