máquinas injetoras usadas para venda (1,128)

This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2 air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, its designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information.

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine.

This FANUC Roboshot S150iA was manufactured in 2015. Its an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

Máquina de moldagem por injeção Krauss Maffei CX 650-3000 BJ 2009

Máquina de moldagem por injeção Krauss Maffei KM 800-5700 BJ 1999 Dados técnicos a pedido

Máquina de moldagem por injeção Battenfeld Tipo de máquina TM 2700/2800 Tipo de Controlo B2 Ano de construção: 2003/04 Diâmetro do parafuso 75 mm

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, opening stroke: 500mm, min. mold installation height: 250mm, mounting plate distance: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, weight: approx. 4300kg, operating hours: approx. 80131h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...

Key data: 2000 kN, 291 g/PS, 45 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção de Mesa Rotativa Fabricante: ARBURG Tipo: 1500T2000-800 Ano de Fabricação: 2012 Força de fixação: 200 toneladas Mesa rotativa; 2 x 180° Parafusos DN: 45 mm Deslocamento máximo: 313 cm³ Peso da peça moldada: 291 g/hp Controlo: SELGOCIA Equipamento: 1 x Core Pulls

Ref. no.: 18587Hersteller: FERROMATIK MILACRONYear of construction: 2001Clamping unitClamping force: 200 tonOpening stroke: 750 mmDistance between tie bars: 560 x 560 mmMould height min.: 300 mmOpening width: 1050 mmPlaten size (h x v): 830 x 830 mmInjection unitScrew diameter: 50 mmInjection volume: 416 cm³Shot weight: 375 gMeasurements and weightDimensions: 6,9 x 2,0 x 2,6 mMachine weight: 13000 kg

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

Máquina de Moldagem por Injeção FCS SD 6000 BJ 2016

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM250-1000CX Ano de Fabricação: 2017 Força de fixação: 250 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 55 mm Deslocamento máximo: 523 cm³ Peso da peça moldada: 476 g/hp Controlo: MC6 Equipamento: Comboio de núcleo de 2 PCS Robô de Interface Controlo de canal de zona quente a 12 vias Unidade de controlo de temperatura de interface

Key data: 4200 kN, 2 g/PS, 80 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM420-4300CX Ano de Fabricação: 2012 Força de fixação: 420 toneladas Espaçamento das longarinas 800 x 800 mm Parafusos DN: 80 mm Deslocamento máximo: 1.810 cm³ Peso da peça moldada: 1.647 g/hp Controlo: MC6 Equipamento: Comboio de núcleo de 2 PCS Robô de Interface Controlo de canal de zona quente a 12 vias Unidade de controlo de temperatura de interface

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: DEMAG Tipo: Conceito ET60-200 Ano de Fabricação: 2003 Força de fixação: 60 toneladas Espaçamento dos longarinos 420 x 420 mm DN dos parafusos: 30 mm Deslocamento máximo: 106 cm³ Peso da peça moldada: 94 g/hp Controlo: NC5 Equipamento: Fabricante do robô: WITTMANN, tipo: W621-1381 Comboio de núcleo de 2 PCS

Key data: 2000 kN, 352 g/PS, 50 mm

1.0 St. Gebr. Máquina de moldagem por injeção de dois componentes com robô Fabricante: ENGEL Tipo: ES650H/200W-200HL-2F Ano de Fabricação: 2000 Força de fixação: 200 toneladas Espaçamento da barra de ligação sem parcimens Altura mínima de instalação: 450 mm Curso inicial: 700 mm Parafusos DN 1: 50 mm Deslocamento máximo: 392 cm³ Peso da peça moldada em cv: 352 g Parafuso DN 2: 25 mm Deslocamento máximo: 69 cm³ Peso da peça moldada em hp: 60 g Controlo: CC200 Equipamento técnico: -Robô Engel, tipo: ERC23/1-E -4 slides de núcleo -Controlo do gira-discos

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: DEMAG Tipo: Conceito ET250-840 Ano de Fabricação: 2004 Força de fixação: 250 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 60 mm Deslocamento máximo: 636 cm³ Peso da peça moldada: 579 g/hp Controlo: NC5 Equipamento: Fabricante do robô: WITTMANN, tipo: W633-931 Comboio de núcleo de 2 PCS

Key data: 5000 kN, 2 g/PS, 90 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM300-1900CX Ano de Fabricação: 2011 Força de fixação: 300 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 60 mm Deslocamento máximo: 769 cm³ Peso da peça moldada: 692 g/hp Controlo: MC6 Equipamento: 3 peças de comboio de núcleo Djbr Rvoxyrc Isf Nysul Robô de Interface Controlo de canal de zona ativa de 45 vezes Unidade de controlo de temperatura de interface Aproximadamente 51.000 horas de funcionamento

Key data: 3000 kN

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM300-1900CX Ano de Fabricação: 2011 Força de fixação: 300 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 60 mm Deslocamento máximo: 769 cm³ Peso da peça moldada: 692 g/hp Controlo: MC6 Equipamento: 3 peças de comboio de núcleo Robô de Interface Controlo de canal de zona ativa de 45 vezes Unidade de controlo de temperatura de interface Aproximadamente 51.000 horas de funcionamento

Key data: 3000 kN, 679 g/PS, 60 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção Fabricante: KRAUSS MAFFEI Tipo: KM300-1900C2 Ano de fabricação: 2005 Força de fixação: 300 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 60 mm Deslocamento máximo: 754 cm³ Peso da peça moldada: 679 g/hp Controlo: MC5 Equipamento: Comboio de núcleo de 2 PCS Robô de Interface Medição de pressão na cavidade Controlo de canal de zona quente 24 vezes Unidade de controlo de temperatura de interface Aproximadamente 76.000 horas de funcionamento

3 máquinas de moldagem por injeção Stork 440 a 1 x Máquina de moldagem por injeção Stork 660 a 2 x Máquina de moldagem por injeção Stork 900 a

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...